1 Scope
This Standard specifies X-ray real-time radioscopic non-destructive testing method for magnesium alloy casting, but does not specify the acceptable criteria of the internal nonuniformity in the casting.
This Standard is applicable to the real-time non-destructive testing on the categories and severity of the internal nonuniformity in the magnesium alloy castings.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Foreword I
1 Scope
2 Normative References
3 Methods and Principles
4 Terms and Definitions
5 Personnel Requirements
6 Equipments
7 Testing Method
8 Treatment of Test Results
1 Scope
This Standard specifies X-ray real-time radioscopic non-destructive testing method for magnesium alloy casting, but does not specify the acceptable criteria of the internal nonuniformity in the casting.
This Standard is applicable to the real-time non-destructive testing on the categories and severity of the internal nonuniformity in the magnesium alloy castings.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of GB/T 23600-2009
Foreword I
1 Scope
2 Normative References
3 Methods and Principles
4 Terms and Definitions
5 Personnel Requirements
6 Equipments
7 Testing Method
8 Treatment of Test Results
