Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3183-2003 Masonry Cement and has the following main changes with respect to it.
——Requirements for masonry cement components are deleted (5.1 in 2003 edition);
——32.5 strength grade is added (see Chapter 5; Chapter 6 in 2003 edition);
——Limit and determination of chlorine ion, water-soluble chromium (VI) and radioactivity for cement are added (see 6.1.2, 6.1.3, 6.2.6, 7.1, 7.2 and 7.7);
——Type inspection is added (see 8.2.2 and 8.3.2).
This standard was proposed by China Building Materials Federation.
This standard is under the jurisdiction of National Technical Committee on Cements of Standardization Administration of China (SAC/TC 184).
The previous editions of this standard are as follows:
——GB/T 3183-1982, GB/T 3183-1997, GB/T 3183-2003.
Masonry Cement
1 Scope
This standard specifies requirements for masonry cement, including terms and definitions, composition and material, code and strength grade, technical requirements, test methods, inspection rules, end of manufacturing, delivery and acceptance as well as packaging, marking, transportation and storage, etc.
This standard is applicable to masonry cement required for masonry, plastering mortar and cushion course concrete.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 176 Methods for Chemical Analysis of Cement
GB/T 203 Granulated Blastfurnace Slag Used for Cement Production
GB/T 1345 The Test Sieving Method for Fineness of Cement
GB/T 1346 Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Portland Cement
GB/T 1596 Fly Ash Used for Cement and Concrete
GB/T 2419 Test Method for Fluidity of Cement Mortar
GB/T 2847 Pozzolanic Materials Used for Cement Production
GB/T 5483 Natural Gypsum
GB 6566 Limits of Radionuclides in Building Materials
GB/T 6645 Granulated Electric Furnace Phosphorous Slag Used for Cement
GB/T 9774 Sacks for Packing Cement
GB/T 12573 Sampling Method for Cement
GB/T 17671 Method of Testing Cements - Determination of Strength
GB/T 21371 By-product Gypsum Used in Cement
GB/T 21372 Portland Cement Clinker
GB/T 26748 Cement Grinding Aids
GB 31893 Limit and Determination of the Water-soluble Chromium (VI) Content for Cement
GB/T 35164 Limestone Powder Used for Cement, Mortar and Concrete
JC/T 418 Granulated Blast Furnace Titanium Slag Used for Cement
JC/T 742 Rotary Kiln Dust Used in Cement
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
masonry cement
the hydraulic cementing materials with preferable water retention, made by milling Portland cement clinker with specified mixed material and a proper amount of gypsum
4 Composition and Material
4.1 Clinker
Clinker shall meet the requirements of GB/T 21372.
4.2 Gypsum
4.2.1 Natural gypsum
Natural gypsum shall meet the requirements of GB/T 5483.
4.2.2 By-product gypsum
By-product gypsum shall meet the requirements of GB/T 21371.
4.3 Cement mixed material
4.3.1 Active mixed material
Active mixed materials include granulated blast furnace slag specified in GB/T 203, fly ash specified in GB/T 1596, pozzolanic materials specified in GB/T 2847, granulated electric furnace phosphorous slag specified in GB/T 6645 and granulated blast furnace titanium slag specified in JC/T 418.
4.3.2 Inactive mixed materials
Inactive mixed materials include granulated blast furnace slag with activity inferior to that specified in GB/T 203, fly ash with activity inferior to that specified in GB/T 1596, pozzolanic materials with activity inferior to that specified in GB/T 2847, granulated electric furnace phosphorous slag with activity inferior to that specified in GB/T 6645 and granulated blast furnace titanium slag with activity inferior to that specified in JC/T 418 as well as limestone powder specified in GB/T 35164.
4.4 Kiln dust
Kiln dust shall meet the requirements of JC/T 742.
4.5 Cement grinding aids
While grinding cement flour, grinding aids that meet the requirements of GB/T 26748 are allowed to be added with adding amount not exceeding 0.5% of cement mass.
5 Code and Strength Grade
Masonry cement with code of M is classified into three strength grades, i.e. 12.5, 22.5 and 32.5.
6 Technical Requirements
6.1 Chemical component
6.1.1 Sulfur trioxide (SO3)
The content (mass fraction) of sulfur trioxide shall not exceed 3.5%.
6.1.2 Chlorine ion (Cl-)
The content (mass fraction) of chlorine ion shall not exceed 0.06%.
6.1.3 Water-soluble chromium (VI) in cement
The content of water-soluble chromium (VI) in cement shall not exceed 10.0mg/kg.
6.2 Physical property
6.2.1 Fineness
Residue on 80μm square hole sieve shall not exceed 10.0%.
6.2.2 Setting time
The initial setting time shall not be less than 60min and the final setting time shall not exceed 720min.
6.2.3 Soundness by boiling method
Boiling method shall be acceptable.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Composition and Material
5 Code and Strength Grade
6 Technical Requirements
7 Test Methods
8 Inspection Rules
9 End-of-manufacturing, Delivery and Acceptance
10 Packaging, Marking, Transportation and Storage
Annex A (Normative) Determination of Water Retention Rate for Masonry Cement
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3183-2003 Masonry Cement and has the following main changes with respect to it.
——Requirements for masonry cement components are deleted (5.1 in 2003 edition);
——32.5 strength grade is added (see Chapter 5; Chapter 6 in 2003 edition);
——Limit and determination of chlorine ion, water-soluble chromium (VI) and radioactivity for cement are added (see 6.1.2, 6.1.3, 6.2.6, 7.1, 7.2 and 7.7);
——Type inspection is added (see 8.2.2 and 8.3.2).
This standard was proposed by China Building Materials Federation.
This standard is under the jurisdiction of National Technical Committee on Cements of Standardization Administration of China (SAC/TC 184).
The previous editions of this standard are as follows:
——GB/T 3183-1982, GB/T 3183-1997, GB/T 3183-2003.
Masonry Cement
1 Scope
This standard specifies requirements for masonry cement, including terms and definitions, composition and material, code and strength grade, technical requirements, test methods, inspection rules, end of manufacturing, delivery and acceptance as well as packaging, marking, transportation and storage, etc.
This standard is applicable to masonry cement required for masonry, plastering mortar and cushion course concrete.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 176 Methods for Chemical Analysis of Cement
GB/T 203 Granulated Blastfurnace Slag Used for Cement Production
GB/T 1345 The Test Sieving Method for Fineness of Cement
GB/T 1346 Test Methods for Water Requirement of Normal Consistency, Setting Time and Soundness of the Portland Cement
GB/T 1596 Fly Ash Used for Cement and Concrete
GB/T 2419 Test Method for Fluidity of Cement Mortar
GB/T 2847 Pozzolanic Materials Used for Cement Production
GB/T 5483 Natural Gypsum
GB 6566 Limits of Radionuclides in Building Materials
GB/T 6645 Granulated Electric Furnace Phosphorous Slag Used for Cement
GB/T 9774 Sacks for Packing Cement
GB/T 12573 Sampling Method for Cement
GB/T 17671 Method of Testing Cements - Determination of Strength
GB/T 21371 By-product Gypsum Used in Cement
GB/T 21372 Portland Cement Clinker
GB/T 26748 Cement Grinding Aids
GB 31893 Limit and Determination of the Water-soluble Chromium (VI) Content for Cement
GB/T 35164 Limestone Powder Used for Cement, Mortar and Concrete
JC/T 418 Granulated Blast Furnace Titanium Slag Used for Cement
JC/T 742 Rotary Kiln Dust Used in Cement
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
masonry cement
the hydraulic cementing materials with preferable water retention, made by milling Portland cement clinker with specified mixed material and a proper amount of gypsum
4 Composition and Material
4.1 Clinker
Clinker shall meet the requirements of GB/T 21372.
4.2 Gypsum
4.2.1 Natural gypsum
Natural gypsum shall meet the requirements of GB/T 5483.
4.2.2 By-product gypsum
By-product gypsum shall meet the requirements of GB/T 21371.
4.3 Cement mixed material
4.3.1 Active mixed material
Active mixed materials include granulated blast furnace slag specified in GB/T 203, fly ash specified in GB/T 1596, pozzolanic materials specified in GB/T 2847, granulated electric furnace phosphorous slag specified in GB/T 6645 and granulated blast furnace titanium slag specified in JC/T 418.
4.3.2 Inactive mixed materials
Inactive mixed materials include granulated blast furnace slag with activity inferior to that specified in GB/T 203, fly ash with activity inferior to that specified in GB/T 1596, pozzolanic materials with activity inferior to that specified in GB/T 2847, granulated electric furnace phosphorous slag with activity inferior to that specified in GB/T 6645 and granulated blast furnace titanium slag with activity inferior to that specified in JC/T 418 as well as limestone powder specified in GB/T 35164.
4.4 Kiln dust
Kiln dust shall meet the requirements of JC/T 742.
4.5 Cement grinding aids
While grinding cement flour, grinding aids that meet the requirements of GB/T 26748 are allowed to be added with adding amount not exceeding 0.5% of cement mass.
5 Code and Strength Grade
Masonry cement with code of M is classified into three strength grades, i.e. 12.5, 22.5 and 32.5.
6 Technical Requirements
6.1 Chemical component
6.1.1 Sulfur trioxide (SO3)
The content (mass fraction) of sulfur trioxide shall not exceed 3.5%.
6.1.2 Chlorine ion (Cl-)
The content (mass fraction) of chlorine ion shall not exceed 0.06%.
6.1.3 Water-soluble chromium (VI) in cement
The content of water-soluble chromium (VI) in cement shall not exceed 10.0mg/kg.
6.2 Physical property
6.2.1 Fineness
Residue on 80μm square hole sieve shall not exceed 10.0%.
6.2.2 Setting time
The initial setting time shall not be less than 60min and the final setting time shall not exceed 720min.
6.2.3 Soundness by boiling method
Boiling method shall be acceptable.
Contents of GB/T 3183-2017
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Composition and Material
5 Code and Strength Grade
6 Technical Requirements
7 Test Methods
8 Inspection Rules
9 End-of-manufacturing, Delivery and Acceptance
10 Packaging, Marking, Transportation and Storage
Annex A (Normative) Determination of Water Retention Rate for Masonry Cement
