GB/T 3199-2026 Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS
CCS
National Standard of the People's Republic of China
GB/T 3199-2026
Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products
铝及铝合金加工产品包装、标志、运输、贮存
Issue date: 2026-01-28 Implementation date: 2027-02-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Packaging
5 Marking
6 Transportation
7 Storage
Aluminium and aluminium alloy processed products — Packaging, marking, transportation and storage
1 Scope
This document specifies the requirements for packaging, marking, transportation and storage of aluminium and aluminium alloy processed products.
This document is applicable to processed products such as aluminium and aluminium alloy ingots, sheets, strips, foils, tubes, bars, profiles, wires and forgings, and is also applicable to powder products.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB 190, Packing symbol of dangerous goods
GB/T 191, Packaging — Pictorial marking for handling of goods
GB/T 4122.1, Packaging terms — Part 1: Basic
GB/T 4122.3, Packaging terms — Part 3: Protection
GB/T 4122.4, Packaging terms — Part 4: Materials and containers
GB/T 8005.1, Aluminium and aluminium alloy terms — Part 1: Products and methods of processing and treatment
GB/T 42916, Identification of aluminium and aluminium alloy products
SH/T 0692, Rust preventive oils
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 4122.1, GB/T 4122.3, GB/T 4122.4 and GB/T 8005.1 apply.
4 Packaging
4.1 General requirements
4.1.1 Packaging materials
4.1.1.1 Packaging materials mainly include paper products, wood, metals, plastics, composite materials and jute products. Typical packaging materials are shown in Annex A. All packaging materials shall comply with environmental protection requirements and shall be recyclable, reusable or degradable.
4.1.1.2 Packaging materials in direct contact with the products shall have a water-soluble pH that is neutral, weakly acidic or weakly alkaline. The moisture content of paper shall not be greater than 10 %, and the moisture content of wood shall not be greater than 20 %.
4.1.1.3 Wood used for export packing cases shall comply with the relevant entry-exit management requirements.
4.1.1.4 There shall be no chemical reaction or adhesive transfer between the protective film and the products.
4.1.2 Packing cases, racks and pallets
4.1.2.1 Packing cases, racks and pallets may be made of wood, metal or other materials, and shall have sufficient strength and be resistant to damage.
4.1.2.2 The dimensions of packing cases, racks and pallets shall meet the product size requirements, and the products shall not shift or be squeezed within the packing cases, racks or pallets. When shipped in containers, the dimensions of packing cases, racks and pallets shall match the container dimensions.
4.1.2.3 The height of the base supports of packing cases, racks and pallets shall meet the robustness requirements and shall also meet the operational requirements of cranes and forklifts.
4.1.2.4 Packing cases, racks and pallets shall be neat, clean and dry.
4.1.2.5 Nails on wooden packing cases, racks and pallets shall be arranged in a staggered pattern. Nail heads shall be driven flat, and nail points shall be bent over. There shall be no protruding nails or missing nails. Lifting points on wooden packing cases, racks and pallets should preferably be fitted with protective steel angles for hoisting and marked accordingly. The timber sections at lifting points and connection points shall not have dead knots that affect strength. The crack length or depth of a single timber section shall not exceed half of its length or thickness.
4.1.2.6 Metal packing cases, racks and pallets shall be securely welded (riveted), with no missing welds (rivets), and weld scars (rivets) shall be smoothed.
4.1.3 Corrosion protection treatment
4.1.3.1 The quality of rust preventive oil shall meet the requirements of SH/T 0692. The viscosity of rust preventive oil shall be appropriately adjusted according to product characteristics and ambient temperature, and the moisture content of rust preventive oil shall not be greater than 0.03 %.
4.1.3.2 Products not coated with rust preventive oil or not covered with film shall be packed with desiccants during sea transportation.
4.1.3.3 When the purchaser has special requirements for vapour-phase corrosion protection, they shall be determined by agreement between the supplier and the purchaser and stated in the order.
4.1.4 Other requirements
4.1.4.1 Packaging bundling shall be carried out using strapping bands. When steel strapping is used, plastic pads or paperboard shall be placed at the corners or buckles where the steel strapping comes into direct contact with the products for protection.
4.1.4.2 The specific packaging methods and treatment procedures for products shall comply with the requirements of the corresponding product standards or orders.
4.2 Classification of packaging methods
The classification of packaging methods for products is shown in Table 1.
4.3 Packaging methods
4.3.1 Ingots
The packaging methods for ingots are shown in Table 2.
4.3.2 Sheets
The packaging methods for sheets are shown in Table 3.
4.3.3 Strips
The packaging methods for strips are shown in Table 4.
4.3.4 Foils
The packaging methods for foils are shown in Table 5.
4.3.5 Tubes, bars and profiles
The packaging methods for tubes, bars and profiles are shown in Table 6.
4.3.6 Wires
The packaging methods for wires are shown in Table 7.
4.3.7 Forgings
The packaging methods for forgings are shown in Table 8.
4.3.8 Powders
The packaging methods for powders are shown in Table 9.
Standard
GB/T 3199-2026 Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products (English)
Standard No.
GB/T 3199-2026
Status
to be valid
Language
English
File Format
PDF
Word Count
17500 words
Translation Price(USD)
525.0
Implemented on
2026-12-1
Delivery
via email in 1~5 business day
Detail of GB/T 3199-2026
Standard No.
GB/T 3199-2026
English Name
Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products
GB/T 3199-2026 Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS
CCS
National Standard of the People's Republic of China
GB/T 3199-2026
Packing, marking, transporting and storing of wrought aluminium and aluminium alloy products
铝及铝合金加工产品包装、标志、运输、贮存
Issue date: 2026-01-28 Implementation date: 2027-02-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Packaging
5 Marking
6 Transportation
7 Storage
Aluminium and aluminium alloy processed products — Packaging, marking, transportation and storage
1 Scope
This document specifies the requirements for packaging, marking, transportation and storage of aluminium and aluminium alloy processed products.
This document is applicable to processed products such as aluminium and aluminium alloy ingots, sheets, strips, foils, tubes, bars, profiles, wires and forgings, and is also applicable to powder products.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB 190, Packing symbol of dangerous goods
GB/T 191, Packaging — Pictorial marking for handling of goods
GB/T 4122.1, Packaging terms — Part 1: Basic
GB/T 4122.3, Packaging terms — Part 3: Protection
GB/T 4122.4, Packaging terms — Part 4: Materials and containers
GB/T 8005.1, Aluminium and aluminium alloy terms — Part 1: Products and methods of processing and treatment
GB/T 42916, Identification of aluminium and aluminium alloy products
SH/T 0692, Rust preventive oils
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 4122.1, GB/T 4122.3, GB/T 4122.4 and GB/T 8005.1 apply.
4 Packaging
4.1 General requirements
4.1.1 Packaging materials
4.1.1.1 Packaging materials mainly include paper products, wood, metals, plastics, composite materials and jute products. Typical packaging materials are shown in Annex A. All packaging materials shall comply with environmental protection requirements and shall be recyclable, reusable or degradable.
4.1.1.2 Packaging materials in direct contact with the products shall have a water-soluble pH that is neutral, weakly acidic or weakly alkaline. The moisture content of paper shall not be greater than 10 %, and the moisture content of wood shall not be greater than 20 %.
4.1.1.3 Wood used for export packing cases shall comply with the relevant entry-exit management requirements.
4.1.1.4 There shall be no chemical reaction or adhesive transfer between the protective film and the products.
4.1.2 Packing cases, racks and pallets
4.1.2.1 Packing cases, racks and pallets may be made of wood, metal or other materials, and shall have sufficient strength and be resistant to damage.
4.1.2.2 The dimensions of packing cases, racks and pallets shall meet the product size requirements, and the products shall not shift or be squeezed within the packing cases, racks or pallets. When shipped in containers, the dimensions of packing cases, racks and pallets shall match the container dimensions.
4.1.2.3 The height of the base supports of packing cases, racks and pallets shall meet the robustness requirements and shall also meet the operational requirements of cranes and forklifts.
4.1.2.4 Packing cases, racks and pallets shall be neat, clean and dry.
4.1.2.5 Nails on wooden packing cases, racks and pallets shall be arranged in a staggered pattern. Nail heads shall be driven flat, and nail points shall be bent over. There shall be no protruding nails or missing nails. Lifting points on wooden packing cases, racks and pallets should preferably be fitted with protective steel angles for hoisting and marked accordingly. The timber sections at lifting points and connection points shall not have dead knots that affect strength. The crack length or depth of a single timber section shall not exceed half of its length or thickness.
4.1.2.6 Metal packing cases, racks and pallets shall be securely welded (riveted), with no missing welds (rivets), and weld scars (rivets) shall be smoothed.
4.1.3 Corrosion protection treatment
4.1.3.1 The quality of rust preventive oil shall meet the requirements of SH/T 0692. The viscosity of rust preventive oil shall be appropriately adjusted according to product characteristics and ambient temperature, and the moisture content of rust preventive oil shall not be greater than 0.03 %.
4.1.3.2 Products not coated with rust preventive oil or not covered with film shall be packed with desiccants during sea transportation.
4.1.3.3 When the purchaser has special requirements for vapour-phase corrosion protection, they shall be determined by agreement between the supplier and the purchaser and stated in the order.
4.1.4 Other requirements
4.1.4.1 Packaging bundling shall be carried out using strapping bands. When steel strapping is used, plastic pads or paperboard shall be placed at the corners or buckles where the steel strapping comes into direct contact with the products for protection.
4.1.4.2 The specific packaging methods and treatment procedures for products shall comply with the requirements of the corresponding product standards or orders.
4.2 Classification of packaging methods
The classification of packaging methods for products is shown in Table 1.
4.3 Packaging methods
4.3.1 Ingots
The packaging methods for ingots are shown in Table 2.
4.3.2 Sheets
The packaging methods for sheets are shown in Table 3.
4.3.3 Strips
The packaging methods for strips are shown in Table 4.
4.3.4 Foils
The packaging methods for foils are shown in Table 5.
4.3.5 Tubes, bars and profiles
The packaging methods for tubes, bars and profiles are shown in Table 6.
4.3.6 Wires
The packaging methods for wires are shown in Table 7.
4.3.7 Forgings
The packaging methods for forgings are shown in Table 8.
4.3.8 Powders
The packaging methods for powders are shown in Table 9.
