Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Building Materials Federation.
This standard is under the joint jurisdiction of the National Technical Committee on Glass in Building of Standardization Administration of China (SAC/TC 255) and the National Technical Committee on Energy Fundamentals and Management of Standardization Administration of China (SAC/TC 20).
Test method of energy consumption per unit products for tempered glass
1 Scope
This standard specifies the statistical classification, statistical period and statistical preparation of energy consumption per unit products for tempered glass, as well as the energy consumption statistics, output statistics and energy consumption calculation methods of energy consumption per unit products for tempered glass.
This standard is applicable to the energy consumption test of flat tempered glass production line using physical tempering method.
This standard is not applicable to the energy consumption test of tempered glass production line using chemical method.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass
GB/T 20840.2 Instrument transformers - Part 2: Additional requirements for current transformers
3 Statistical classification
Statistics of common flat tempered glass, low emissivity coated flat tempered glass, common curved tempered glass and low emissivity coated curved tempered glass shall be measured separately.
4 Statistical period
The statistical period of one tempered glass production line producing glass with the same thickness and category is at least 1 hour of continuous production and no less than 5 furnace volumes.
Foreword i
1 Scope
2 Normative references
3 Statistical classification
4 Statistical period
5 Statistical preparation
6 Energy consumption and output statistics
7 Calculation method of energy consumption
Foreword
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China Building Materials Federation.
This standard is under the joint jurisdiction of the National Technical Committee on Glass in Building of Standardization Administration of China (SAC/TC 255) and the National Technical Committee on Energy Fundamentals and Management of Standardization Administration of China (SAC/TC 20).
Test method of energy consumption per unit products for tempered glass
1 Scope
This standard specifies the statistical classification, statistical period and statistical preparation of energy consumption per unit products for tempered glass, as well as the energy consumption statistics, output statistics and energy consumption calculation methods of energy consumption per unit products for tempered glass.
This standard is applicable to the energy consumption test of flat tempered glass production line using physical tempering method.
This standard is not applicable to the energy consumption test of tempered glass production line using chemical method.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass
GB/T 20840.2 Instrument transformers - Part 2: Additional requirements for current transformers
3 Statistical classification
Statistics of common flat tempered glass, low emissivity coated flat tempered glass, common curved tempered glass and low emissivity coated curved tempered glass shall be measured separately.
4 Statistical period
The statistical period of one tempered glass production line producing glass with the same thickness and category is at least 1 hour of continuous production and no less than 5 furnace volumes.
Contents of GB/T 36267-2018
Foreword i
1 Scope
2 Normative references
3 Statistical classification
4 Statistical period
5 Statistical preparation
6 Energy consumption and output statistics
7 Calculation method of energy consumption
