GB/T 42601.3-2023 Petroleum, petrochemical and natural gas industries—Lubrication, shaft-sealing and control-oil systems and auxiliaries—Part 3: General-purpose oil systems (English Version)
Petroleum, petrochemical and natural gas industries—Lubrication, shaft-sealing and control-oil systems and auxiliaries—Part 3: General-purpose oil systems
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries- Part 3 : General-purpose oil systems
1 Scope
This document, in conjunction with ISO 10438-1, specifies requirements for oil systems for general-purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers.
Note: The term "general-purpose" is defined in ISO 10438-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 42601.1-2023 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007, IDT)
ISO 10438-1 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : General requirements
ISO 10438-2 : 2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2 : Special-purpose oil systems
ISO 13706 : 2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries
Note: GB/T 3215-2019 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709 : 2009, MOD)
ISO 15649 Petroleum and natural gas industries - Piping
ISO 16889 Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filterelement
Note: GB/T18853-2015 Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element (ISO16889:2008, MOD)
IEC 60034(all parts) Rotating electrical machines
API RP 686 Machinery Installation and Installation Design
TEMA Standards of the Tubular Exchanger Manufacturers Association
NEMA MG1 Motors and Generators
3 Terms, abbreviated terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 42601.1-2023 apply.
4 General
4.1 Basic design
4.1.1 This document covers general-purpose oil systems. Typical datasheets for general-purpose oil systems are in Annex A. Typical piping and instrument diagrams for general-purpose oil systems are in Annex B. Typical inspector checklists for general-purpose oil systems are in Annex C. General-purpose (GP) oil systems are divided into classes and are defined by a coding system that defines the major components supplied (see Table 1). The user shall choose the applicable class and code based upon the required minimum reliability targets for the equipment train. Various API standards have supplied minimum recommended systems as indicated in Table 2 for their equipment. Annex D is supplied as a reference to provide guidance on the selection of a system.
Standard
GB/T 42601.3-2023 Petroleum, petrochemical and natural gas industries—Lubrication, shaft-sealing and control-oil systems and auxiliaries—Part 3: General-purpose oil systems (English Version)
Standard No.
GB/T 42601.3-2023
Status
valid
Language
English
File Format
PDF
Word Count
20000 words
Price(USD)
600.0
Implemented on
2023-12-1
Delivery
via email in 1~3 business day
Detail of GB/T 42601.3-2023
Standard No.
GB/T 42601.3-2023
English Name
Petroleum, petrochemical and natural gas industries—Lubrication, shaft-sealing and control-oil systems and auxiliaries—Part 3: General-purpose oil systems
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries- Part 3 : General-purpose oil systems
1 Scope
This document, in conjunction with ISO 10438-1, specifies requirements for oil systems for general-purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers.
Note: The term "general-purpose" is defined in ISO 10438-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 42601.1-2023 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007, IDT)
ISO 10438-1 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1 : General requirements
ISO 10438-2 : 2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2 : Special-purpose oil systems
ISO 13706 : 2011 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries
Note: GB/T 3215-2019 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709 : 2009, MOD)
ISO 15649 Petroleum and natural gas industries - Piping
ISO 16889 Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filterelement
Note: GB/T18853-2015 Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element (ISO16889:2008, MOD)
IEC 60034(all parts) Rotating electrical machines
API RP 686 Machinery Installation and Installation Design
TEMA Standards of the Tubular Exchanger Manufacturers Association
NEMA MG1 Motors and Generators
3 Terms, abbreviated terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 42601.1-2023 apply.
4 General
4.1 Basic design
4.1.1 This document covers general-purpose oil systems. Typical datasheets for general-purpose oil systems are in Annex A. Typical piping and instrument diagrams for general-purpose oil systems are in Annex B. Typical inspector checklists for general-purpose oil systems are in Annex C. General-purpose (GP) oil systems are divided into classes and are defined by a coding system that defines the major components supplied (see Table 1). The user shall choose the applicable class and code based upon the required minimum reliability targets for the equipment train. Various API standards have supplied minimum recommended systems as indicated in Table 2 for their equipment. Annex D is supplied as a reference to provide guidance on the selection of a system.
