1 Scope
This standard specifies test methods and calculation procedures for the thermal performance of solar collector (hereinafter referred to as collector) in steady and dynamic state.
This standard is applicable to plate solar collector (hereinafter referred to as plate collector) heated by solar radiation and with transparent cover and liquid heat transfer working medium, non-light-concentrating all glass evacuated solar collector with liquidwhose heat transfer working medium is liquid, glass-metal evacuated tube solar collector and heat pipe evacuated tube solar collector (hereinafter referred to as evacuated tube collector).
This standard is not applicable to heat-storage solar collector integratinged with heat reservoir with and collector and is also not applicable to solar collector without transparent cover and tracing focus.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Units
5 Installation and Location of Collector
6 Instrument and Measurement
7 Test-bed
8 Outdoor Efficiency Test
9 Indoor Efficiency Test in Steady State
10 Determination of Effective Heat Capacity and Time Constant for Collector
11 Correction Coefficient of Incidence angle for Collector
12 Determination of Pressure Difference on Both Ends for Collector
13 Testing Report for Thermal Performance of Solar Collector
Appendix A (Normative) Calculation Methods for Aperture Area of Evacuated Tube Solar Collector
Appendix B (Normative) Symbols and Units
Appendix C (Normative) Testing Report Format of Thermal Performance of Solar Collector
Appendix D ((Normative) Collector Characteristics
Appendix E (Normative) Heating Physical Property Parameters of Water
Appendix F (Normative) Determination for Effective Heat Capacity
Appendix G (Normative) Outdoor Efficiency Test in Dynamic State
Appendix H (Informative) Indoor Efficiency Test in Steady State
Bibliography
Standard
GB/T 4271-2007 Test methods for the thermal performance of solar collectors (English Version)
Standard No.
GB/T 4271-2007
Status
superseded
Language
English
File Format
PDF
Word Count
14000 words
Price(USD)
280.0
Implemented on
2008-6-1
Delivery
via email in 1 business day
Detail of GB/T 4271-2007
Standard No.
GB/T 4271-2007
English Name
Test methods for the thermal performance of solar collectors
1 Scope
This standard specifies test methods and calculation procedures for the thermal performance of solar collector (hereinafter referred to as collector) in steady and dynamic state.
This standard is applicable to plate solar collector (hereinafter referred to as plate collector) heated by solar radiation and with transparent cover and liquid heat transfer working medium, non-light-concentrating all glass evacuated solar collector with liquidwhose heat transfer working medium is liquid, glass-metal evacuated tube solar collector and heat pipe evacuated tube solar collector (hereinafter referred to as evacuated tube collector).
This standard is not applicable to heat-storage solar collector integratinged with heat reservoir with and collector and is also not applicable to solar collector without transparent cover and tracing focus.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents of GB/T 4271-2007
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Units
5 Installation and Location of Collector
6 Instrument and Measurement
7 Test-bed
8 Outdoor Efficiency Test
9 Indoor Efficiency Test in Steady State
10 Determination of Effective Heat Capacity and Time Constant for Collector
11 Correction Coefficient of Incidence angle for Collector
12 Determination of Pressure Difference on Both Ends for Collector
13 Testing Report for Thermal Performance of Solar Collector
Appendix A (Normative) Calculation Methods for Aperture Area of Evacuated Tube Solar Collector
Appendix B (Normative) Symbols and Units
Appendix C (Normative) Testing Report Format of Thermal Performance of Solar Collector
Appendix D ((Normative) Collector Characteristics
Appendix E (Normative) Heating Physical Property Parameters of Water
Appendix F (Normative) Determination for Effective Heat Capacity
Appendix G (Normative) Outdoor Efficiency Test in Dynamic State
Appendix H (Informative) Indoor Efficiency Test in Steady State
Bibliography
