Standard No.:	GB/T 5660-2013
English Name:	End-suction Centrifugal Pumps - Baseplate and Installation Dimensions
Chinese Name:	轴向吸入离心泵 底座尺寸和安装尺寸
Chinese Classification:	J71    Pump
Professional Classification:	GB    National Standard
Source Content Issued by:	AQSIQ;SAC
Issued on:	2013-12-17
Implemented on:	2014-10-1
Status:	valid
Superseding:	GB/T 5660-1985 End-suction centrifugal pumps; Baseplate and installation dimensions
Target Language:	English
File Format:	PDF
Word Count:	6000 words
Translation Price(USD):	140.0
Delivery:	via email in 1 business day

End-suction centrifugal pumps - Baseplate and installation dimensions 1 Scope This standard specifies the baseplate and installation dimensions for end-suction centrifugal pumps (hereinafter referred to as pumps). This standard is applicable to pumps and Y2 and Y3 series three-phase asynchronous motors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 5662 End-suction centrifugal pumps (rating 1.6 MPa) - Designation, nominal duty point and dimensions JB/T 8680 Specification for Y2 series (IP54) three-phase asynchronous motor (frame size 63~355) JB/T 10447 Specification for Y3 series (IP55) three-phase induction motor (frame size 63~355) 3 Baseplate and installation dimensions 3.1 The dimensions of pumps shall meet the requirements of GB/T 5662. The installation dimensions of motors shall meet the requirements of JB/T 8680 and JB/T 10447. 3.2 the baseplate No. and dimensions are shown in the Table 1 and Figure 1. The basic installation dimensions are shown in Figure 2.  

Foreword i 1 Scope 2 Normative references 3 Baseplate and installation dimensions Bibliography