Standard No.:	GJB 3324A-2021
English Name:	Specification for high-strength steel plates for aerospace solid engines
Chinese Name:	航天固体发动机用高强度钢板规范
Professional Classification:	GJB    Professional Standard - Military
Issued on:	2021-12-30
Implemented on:	2022-3-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	4000 words
Translation Price(USD):	150.0
Delivery:	via email in 1 business day

GJB 3324A-2021 Specification for high strength steel plates for aerospace solid motor 1 Scope This specification specifies the requirements for high strength steel plates for aerospace solid motor. This standard is applicable to cold-rolled steel plates with a nominal thickness not exceeding 6mm and hot-rolled steel plates with a nominal thickness not exceeding 10mm (hereinafter referred to as "steel plates") for aerospace solid motor. After negotiation between the supplier and the purchaser, steel plates of other thickness specifications may also be supplied. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method GB/T 223.14 Methods for chemical analysis of iron, steel and alloy GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content GB/T 223.69 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace GB/T 224 Determination of the depth of decarburization of steels GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method GB/T 232 Metallic materials - Bend testing method GB/T 247 General rule of package, mark and certification for steel plates (sheets) and strips GB/T 708 Dimension, shape, weight and tolerance for cold-rolled steel strip and sheet GB/T 709 Dimension, shape, weight and tolerances for hot-rolled steel plates and sheets GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method) GB/T 7732 Metallic materials - Fracture toughness testing method with surface crack tension specimens GB/T 8651 Flaw detection method by the ultrasonic plate wave for metal plates GB/T 10561-2005 Steel - Determination of content of nonmetallic inclusions - Micrographic method using standards diagrams

Contents Foreword i 1 Scope 2 Normative references 3 Requirements 4 Quality assurance requirements 5 Preparation for delivery 6 Explanatory notes