Glass-lined agitator - Retreat curve impeller type
1 Scope
This standard specifies the type, basic parameters, main dimensions, requirements, packaging, transportation and storage of the glass-lined agitator—retreat curve impeller （RCI）type. This standard is applicable to the retreat curve impeller agitator of the glass-lined agitating vessels with a nominal volume of 50L-40 000L, a design temperature of -20℃ - 200℃, a nominal turning speed 70r/min - 125r/min and the linear velocity of the end of the blade of the agitator is no more than 8m/s.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 25025 Specification of glass-lined equipment for industry
GB/T 25026 Structure,main size and basic parameters of one piece glass-lined steel vessels
with agitator
GB/T 25027 Two pieces glass-lined steel vessels with agitator
HG/T 2052 Drive for glass-lined vessel with agitator
3 Type, Basic parameters and Main dimensions
3.1 See Figure 1 for retreat curve impeller glass-lined agitator’s type and see Table 1 for its basic parameters and main dimensions.
3.2 Four types of the agitator shaft end are as follows: ——A-type shaft end is compatible with the TB-type agitator given in HG/T 2052. ——B-type shaft end is compatible with the DJ-type agitator given in HG/T 2052. ——C-type shaft end is compatible with the DZ- and SZ-type agitator given in HG/T 2052. ——D-type shaft end is compatible with the SJ-type agitator given in HG/T 2052.
3.3 Connection type and dimensions of the agitator shaft end ——See Figure 2 for A-type shaft end connection, and see Table 2 for its dimensions. ——See Figure 3 for B-type shaft end connection, and see Table 3 for its dimensions. ——See Figure 4 for C-type shaft end connection, and see Table 4 for its dimensions. ——See Figure 5 for D-type shaft end connection, and see Table 5 for
Glass-lined agitator - Retreat curve impeller type
1 Scope
This standard specifies the type, basic parameters, main dimensions, requirements, packaging, transportation and storage of the glass-lined agitator—retreat curve impeller （RCI）type. This standard is applicable to the retreat curve impeller agitator of the glass-lined agitating vessels with a nominal volume of 50L-40 000L, a design temperature of -20℃ - 200℃, a nominal turning speed 70r/min - 125r/min and the linear velocity of the end of the blade of the agitator is no more than 8m/s.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 25025 Specification of glass-lined equipment for industry
GB/T 25026 Structure,main size and basic parameters of one piece glass-lined steel vessels
with agitator
GB/T 25027 Two pieces glass-lined steel vessels with agitator
HG/T 2052 Drive for glass-lined vessel with agitator
3 Type, Basic parameters and Main dimensions
3.1 See Figure 1 for retreat curve impeller glass-lined agitator’s type and see Table 1 for its basic parameters and main dimensions.
3.2 Four types of the agitator shaft end are as follows: ——A-type shaft end is compatible with the TB-type agitator given in HG/T 2052. ——B-type shaft end is compatible with the DJ-type agitator given in HG/T 2052. ——C-type shaft end is compatible with the DZ- and SZ-type agitator given in HG/T 2052. ——D-type shaft end is compatible with the SJ-type agitator given in HG/T 2052.
3.3 Connection type and dimensions of the agitator shaft end ——See Figure 2 for A-type shaft end connection, and see Table 2 for its dimensions. ——See Figure 3 for B-type shaft end connection, and see Table 3 for its dimensions. ——See Figure 4 for C-type shaft end connection, and see Table 4 for its dimensions. ——See Figure 5 for D-type shaft end connection, and see Table 5 for
