HG/T 4374-2012 Specification for metallic tower packings
1 Scope
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, storage and transportation of metallic tower packings.
This standard is applicable to metallic packings used in packed towers in the petroleum and chemical industries and other industries.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 708 Dimension, shape, weight and tolerance for cold-rolled steel strip and sheet
GB/T 710 Hot-rolled quality carbon structural steel plate, sheet and strip
GB/T 3280 Cold rolled stainless steel plate, sheet and strip
GB/T 5330 Industrial woven metal wire cloth (square opening series)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
metallic tower packings
specially designed metal parts in the shapes of rings, saddles, spheres, plates, corrugations and their combinations, which are used in towers to provide contacting surface area to promote energy transfer, mass transfer or chemical reaction between liquid and liquid, between gas and liquid and between gas and gas
4 Classification
4.1 Material
Metallic tower packing products are divided, according to the main material used, into two categories: carbon steel and stainless steel.
4.2 Types
Metallic tower packings are divided, according to their types, into random packings and structured packings. Metallic random packings have seven configurations: Raschig ring, Pall ring, Intalox saddle ring, cascade ring, conjugate ring, flat ring and 8-4 inner arc ring; metallic structured packings have three configurations: perforated-plate corrugated-sheet structured packing, punched-mesh corrugated-sheet structured packing and wire-gauze corrugated-sheet structured packing.
4.3 Specifications
Metallic random packing products are divided, according to nominal diameter, into specifications such as φ16 mm, φ25 mm, φ38 mm, φ50 mm and φ76 mm; metallic structured packings have specifications such as 125, 250, 350, 450, 500 and 700 according to specific surface area. The diameter and height of the packings shall be determined by the diameter of the tower and the height of the bed.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Inspection methods
7 Inspection rules
8 Marking, packaging, storage and transportation
Annex A (Normative) Shape, dimensions and characteristic parameters of Raschig ring packings
Annex B (Normative) Shape, dimensions and characteristic parameters of Intalox saddle packings
Annex C (Normative) Shape, dimensions and characteristic parameters of Pall ring packings
Annex D (Normative) Shape, dimensions and characteristic parameters of cascade ring packings
Annex E (Normative) Shape, dimensions and characteristic parameters of conjugate ring packings
Annex F (Normative) Shape, dimensions and characteristic parameters of flat ring packings
Annex G (Normative) Shape, dimensions and characteristic parameters of 8-4 inner arc ring packings
Annex H (Normative) Shape, dimensions and characteristic parameters of perforated-plate corrugated-sheet structured packing
Annex I (Normative) Shape, dimensions and characteristic parameters of punched-mesh corrugated-sheet structured packings
Annex J (Normative) Shape, dimensions and characteristic parameters of wire-gauze corrugated-sheet structured packings
HG/T 4374-2012 Specification for metallic tower packings
1 Scope
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, storage and transportation of metallic tower packings.
This standard is applicable to metallic packings used in packed towers in the petroleum and chemical industries and other industries.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 708 Dimension, shape, weight and tolerance for cold-rolled steel strip and sheet
GB/T 710 Hot-rolled quality carbon structural steel plate, sheet and strip
GB/T 3280 Cold rolled stainless steel plate, sheet and strip
GB/T 5330 Industrial woven metal wire cloth (square opening series)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
metallic tower packings
specially designed metal parts in the shapes of rings, saddles, spheres, plates, corrugations and their combinations, which are used in towers to provide contacting surface area to promote energy transfer, mass transfer or chemical reaction between liquid and liquid, between gas and liquid and between gas and gas
4 Classification
4.1 Material
Metallic tower packing products are divided, according to the main material used, into two categories: carbon steel and stainless steel.
4.2 Types
Metallic tower packings are divided, according to their types, into random packings and structured packings. Metallic random packings have seven configurations: Raschig ring, Pall ring, Intalox saddle ring, cascade ring, conjugate ring, flat ring and 8-4 inner arc ring; metallic structured packings have three configurations: perforated-plate corrugated-sheet structured packing, punched-mesh corrugated-sheet structured packing and wire-gauze corrugated-sheet structured packing.
4.3 Specifications
Metallic random packing products are divided, according to nominal diameter, into specifications such as φ16 mm, φ25 mm, φ38 mm, φ50 mm and φ76 mm; metallic structured packings have specifications such as 125, 250, 350, 450, 500 and 700 according to specific surface area. The diameter and height of the packings shall be determined by the diameter of the tower and the height of the bed.
Contents of HG/T 4374-2012
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Inspection methods
7 Inspection rules
8 Marking, packaging, storage and transportation
Annex A (Normative) Shape, dimensions and characteristic parameters of Raschig ring packings
Annex B (Normative) Shape, dimensions and characteristic parameters of Intalox saddle packings
Annex C (Normative) Shape, dimensions and characteristic parameters of Pall ring packings
Annex D (Normative) Shape, dimensions and characteristic parameters of cascade ring packings
Annex E (Normative) Shape, dimensions and characteristic parameters of conjugate ring packings
Annex F (Normative) Shape, dimensions and characteristic parameters of flat ring packings
Annex G (Normative) Shape, dimensions and characteristic parameters of 8-4 inner arc ring packings
Annex H (Normative) Shape, dimensions and characteristic parameters of perforated-plate corrugated-sheet structured packing
Annex I (Normative) Shape, dimensions and characteristic parameters of punched-mesh corrugated-sheet structured packings
Annex J (Normative) Shape, dimensions and characteristic parameters of wire-gauze corrugated-sheet structured packings