1 Scope
This Standard specifies the types and basic parameters, technical requirements, test methods, inspection rules, and marking, packaging, transportation and storage for JTP type mine winders (hereinafter referred to as winders).
This Standard is applicable to the winders, used for raising and lowering materials and personnel in sloping tunnels and small shafts of coal mine, metallic mine and nonmetallic mine.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents
1 Scope
2 Normative References
3 Types and Basic Parameters
4 Technical Requirements
4.1 Comprehensive Requirements
4.2 Main Shaft Device
4.3 Disc Brake Device
4.4 Reducer
4.5 Hydraulic Station
4.6 Depth Indicator System
4.7 Safety Protection
4.8 Supply Scope of Complete Set
5 Test Methods
6 Inspection Rules
6.1 Delivery Inspection
6.2 Type Inspection
6.3 Sampling Requirements and Judgment Rules
7 Marking, Packaging, Transportation and Storage
7.1 Product Marks
7.2 Packaging
7.3 Transportation and Storage
Standard
JB/T 7888-2010 JTP type mine winder (English Version)
1 Scope
This Standard specifies the types and basic parameters, technical requirements, test methods, inspection rules, and marking, packaging, transportation and storage for JTP type mine winders (hereinafter referred to as winders).
This Standard is applicable to the winders, used for raising and lowering materials and personnel in sloping tunnels and small shafts of coal mine, metallic mine and nonmetallic mine.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of JB/T 7888-2010
Contents
1 Scope
2 Normative References
3 Types and Basic Parameters
4 Technical Requirements
4.1 Comprehensive Requirements
4.2 Main Shaft Device
4.3 Disc Brake Device
4.4 Reducer
4.5 Hydraulic Station
4.6 Depth Indicator System
4.7 Safety Protection
4.8 Supply Scope of Complete Set
5 Test Methods
6 Inspection Rules
6.1 Delivery Inspection
6.2 Type Inspection
6.3 Sampling Requirements and Judgment Rules
7 Marking, Packaging, Transportation and Storage
7.1 Product Marks
7.2 Packaging
7.3 Transportation and Storage
