JB/T 8014.3-1999 English Version, JB/T 8014.3-1999 The parts and units of jigs and fixtures - Interchangeable locating pin (English Version)

Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/JB/T 8014.3-1999

JB/T 8014.3-1999 The parts and units of jigs and fixtures - Interchangeable locating pin (English Version)
Standard No.:	JB/T 8014.3-1999	Status:	valid remind me the status change Email:
Target Language:	English	File Format:	PDF
Word Count:	1000 words	Translation Price(USD):	104.0 remind me the price change Email:
Implemented on:	2000-1-1	Delivery:	via email in 1~3 business day

→

Standard No.:	JB/T 8014.3-1999
English Name:	The parts and units of jigs and fixtures - Interchangeable locating pin
Chinese Name:	机床夹具零件及部件可换定位销
Chinese Classification:	J44 General grippers
Professional Classification:	JB Professional Standard - Machinery
ICS Classification:	01.040.29 01.040.29 Electrical engineering (Vocabularies) 01.040.29
Source Content Issued by:	China Mechanical Science Research Institute
Issued on:	1999-8-6
Implemented on:	2000-1-1
Status:	valid
Superseding:	JB/T 8014.1-1995
Target Language:	English
File Format:	PDF
Word Count:	1000 words
Translation Price(USD):	104.0
Delivery:	via email in 1~3 business day

Standard

JB/T 8014.3-1999 The parts and units of jigs and fixtures - Interchangeable locating pin (English Version)
Standard No.	JB/T 8014.3-1999
Status	valid
Language	English
File Format	PDF
Word Count	1000 words
Price(USD)	104.0
Implemented on	2000-1-1
Delivery	via email in 1~3 business day

Detail of JB/T 8014.3-1999

Standard No.

English Name

Chinese Name

Chinese Classification

Professional Classification

ICS Classification

Issued by

Issued on

Implemented on

Status

Superseded by

Superseded on

Abolished on

Superseding

Language

File Format

Word Count

Price(USD)

Keywords

Introduction of JB/T 8014.3-1999

JB/T 8014.3-1999 本标准是对 JB/T 8014.3-95《机床夹具零件及部件可换定位销》的修订，修订时仅按有关规定作了编辑性修改，技术内容没有改变。本标准规定了规格大于 3~50mm 的可换定位销。本标准于 1981 年以 GB 2204-80 首次发布，于 1991年 4 月 30 日第一次修订为 GB/T 2204-91，于 1996 年 4 调整为 JB/T 8014.3-95。

Contents of JB/T 8014.3-1999

Tel: +86-10-8572 5655 \| Fax: +86-10-8581 9515 \| Email: coc@codeofchina.com \| QQ: 672269886
Copyright: Beijing COC Tech Co., Ltd. 2008-2040



Keywords:
JB/T 8014.3-1999, JB 8014.3-1999, JBT 8014.3-1999, JB/T8014.3-1999, JB/T 8014.3, JB/T8014.3, JB8014.3-1999, JB 8014.3, JB8014.3, JBT8014.3-1999, JBT 8014.3, JBT8014.3