1 Scope
This standard specifies the terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of lift-sliding mechanical parking system.
This standard is applicable to the lift-sliding mechanical parking system (hereinafter referred to as "parking system") defined in GB/T 26476.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 700-2006 Carbon Structure Steel
GB 755-2008 Rotating Electrical Machines — Rating and Performance
GB/T 3811-2008 Design Rules for Cranes
GB 4208 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 4942.1 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP code) — Classification
GB/T 8923.1-2011 Preparation of Steel Substrates before Application of Paints and Related Products — Visual Assessment of Surface Cleanliness — Part 1: Rust Grades and Related Products — Uncoated Steel Substrates and of Steel Substrates after Overrall Removal of Previous Coatings
GB/T 9286 Paints and Varnishes — Cross Cut Test for Films
GB/T 9799 Metallic and Other Inorganic Coatings — Electroplated Coatings of Zinc with Supplementary Treatments on Iron or Steel
GB/T 13306 Plates
GB/T 13384 General Specification for Packagings of Mechanical and Electrical Products
GB/T 13912 Metallic Coatings — Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles — Specifications and Test Methods
GB 14048.1-2012 Low-voltage Switchgear and Controlgear — Part 1: General Rules
GB 17907-2010 Mechanical Parking Systems — General Safety Requirement
GB/T 26476 Mechanical Parking System — Vocabulary
GB/T 26559-2011 Mechanical Parking System — Classification
GB 50168 Code for Construction and Acceptance of Cable System Electric Equipment Installation Engineering
Standard
JB/T 8910-2013 Lift-sliding mechanical parking system (English Version)
1 Scope
This standard specifies the terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of lift-sliding mechanical parking system.
This standard is applicable to the lift-sliding mechanical parking system (hereinafter referred to as "parking system") defined in GB/T 26476.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 700-2006 Carbon Structure Steel
GB 755-2008 Rotating Electrical Machines — Rating and Performance
GB/T 3811-2008 Design Rules for Cranes
GB 4208 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 4942.1 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP code) — Classification
GB/T 8923.1-2011 Preparation of Steel Substrates before Application of Paints and Related Products — Visual Assessment of Surface Cleanliness — Part 1: Rust Grades and Related Products — Uncoated Steel Substrates and of Steel Substrates after Overrall Removal of Previous Coatings
GB/T 9286 Paints and Varnishes — Cross Cut Test for Films
GB/T 9799 Metallic and Other Inorganic Coatings — Electroplated Coatings of Zinc with Supplementary Treatments on Iron or Steel
GB/T 13306 Plates
GB/T 13384 General Specification for Packagings of Mechanical and Electrical Products
GB/T 13912 Metallic Coatings — Hot Dip Galvanized Coatings on Fabricated Iron and Steel Articles — Specifications and Test Methods
GB 14048.1-2012 Low-voltage Switchgear and Controlgear — Part 1: General Rules
GB 17907-2010 Mechanical Parking Systems — General Safety Requirement
GB/T 26476 Mechanical Parking System — Vocabulary
GB/T 26559-2011 Mechanical Parking System — Classification
GB 50168 Code for Construction and Acceptance of Cable System Electric Equipment Installation Engineering
