1 Scope
This standard specifies the product code, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of glass fibre wallcovering fabric (hereinafter referred to as "wallcovering fabric").
It is applicable to the glass fibre fabrics used for decoration of building interior wall, with woven fabrics such as glass staple-fibre yarn or glass fibre textured yarns as main material and subjected to surface coating.
2 Normative references
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest edition of the normative document referred to applies.
GB/T 191-2000 Packaging - Pictorial marking for handling of goods
GB/T 7689.3 Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length (idt ISO 5025)
GB/T 7689.5 Reinforcements - Test method for woven fabrics - Part 5: Determination of tensile breaking force and elongation at break for glass fibre (idt ISO 4606:1995)
GB/T 9914.2 Test method for reinforcement products - Part 2: Determination of combustible-matter content for glass fibre (idt ISO 1887)
GB/T 9914.3 The method for reinforcement products - Part 3: Determination of mass per unit area (idt ISO 3374)
3 Product code
The product code is expressed as follows:
Foreword i
1 Scope
2 Normative references
3 Product code
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Normative) Determination of formaldehyde emission in glass fibre wallcovering fabric
Annex B (Normative) Determination of soluble and harmful elements in glass fibre wallcovering fabric
1 Scope
This standard specifies the product code, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of glass fibre wallcovering fabric (hereinafter referred to as "wallcovering fabric").
It is applicable to the glass fibre fabrics used for decoration of building interior wall, with woven fabrics such as glass staple-fibre yarn or glass fibre textured yarns as main material and subjected to surface coating.
2 Normative references
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest edition of the normative document referred to applies.
GB/T 191-2000 Packaging - Pictorial marking for handling of goods
GB/T 7689.3 Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length (idt ISO 5025)
GB/T 7689.5 Reinforcements - Test method for woven fabrics - Part 5: Determination of tensile breaking force and elongation at break for glass fibre (idt ISO 4606:1995)
GB/T 9914.2 Test method for reinforcement products - Part 2: Determination of combustible-matter content for glass fibre (idt ISO 1887)
GB/T 9914.3 The method for reinforcement products - Part 3: Determination of mass per unit area (idt ISO 3374)
3 Product code
The product code is expressed as follows:
Contents of JC/T 996-2006
Foreword i
1 Scope
2 Normative references
3 Product code
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Normative) Determination of formaldehyde emission in glass fibre wallcovering fabric
Annex B (Normative) Determination of soluble and harmful elements in glass fibre wallcovering fabric
