1 Scope
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable to such products in bathroom as bath towel holder, shower curtain rod, tub handle, towel rack (loop), soap box, toilet roll holder, makeup rack, clothes hook, mirror clip, scrubber and cup holder.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, subsequent amendments (excluding corrigendum) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions referred to apply.
GB/T 1720 Method of Test for Adhesion of Paint Films
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1764 Methods of Test for Measurement of Dry Film Thickness of Paints
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes (applicable to inspection of process stability)
GB/T 9286 Paints and Varnishes - Cross Test for Films
QB/T 3821 Adhesion Testing Method of the Metal Deposits for the Light Industrial Products
QB/T 3827 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Acetic Salt Spraying Test (ASS)
QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
3 Classification and Marking
3.1 Product classification
3.1.1 Classification by product name
It's in accordance with Table 1.
Foreword I
Introduction II
1 Scope
2 Normative References
3 Classification and Marking
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Appendix A (Informative) Schematic Diagram for Type and Dimension of Products
1 Scope
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable to such products in bathroom as bath towel holder, shower curtain rod, tub handle, towel rack (loop), soap box, toilet roll holder, makeup rack, clothes hook, mirror clip, scrubber and cup holder.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, subsequent amendments (excluding corrigendum) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions referred to apply.
GB/T 1720 Method of Test for Adhesion of Paint Films
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1764 Methods of Test for Measurement of Dry Film Thickness of Paints
GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829 Sampling Procedures and Tables for Periodic Inspection by Attributes (applicable to inspection of process stability)
GB/T 9286 Paints and Varnishes - Cross Test for Films
QB/T 3821 Adhesion Testing Method of the Metal Deposits for the Light Industrial Products
QB/T 3827 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Acetic Salt Spraying Test (ASS)
QB/T 3832 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
3 Classification and Marking
3.1 Product classification
3.1.1 Classification by product name
It's in accordance with Table 1.
Contents of QB/T 1560-2006
Foreword I
Introduction II
1 Scope
2 Normative References
3 Classification and Marking
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Appendix A (Informative) Schematic Diagram for Type and Dimension of Products
