1 Scope
This standard specifies the definition, product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of polyethylene terephthalate (PET) bottle for carbonation drink.
This standard is applicable to the carbonation drink bottles which are made from polyethylene terephthalate resin and produced by injection molding, drawing and blow molding processes.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents
1 Scope
2 Normative References
3 Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transport and Storage
Appendix A (Informative) Apparent Density of Water in the Air
Appendix B (Informative) Acetaldehyde (AA) Content in PET Bottle Determined by Grinding Method (Method II)
Appendix C (Informative) Minimum Wall Thickness
1 Scope
This standard specifies the definition, product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of polyethylene terephthalate (PET) bottle for carbonation drink.
This standard is applicable to the carbonation drink bottles which are made from polyethylene terephthalate resin and produced by injection molding, drawing and blow molding processes.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of QB/T 1868-2004
Contents
1 Scope
2 Normative References
3 Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transport and Storage
Appendix A (Informative) Apparent Density of Water in the Air
Appendix B (Informative) Acetaldehyde (AA) Content in PET Bottle Determined by Grinding Method (Method II)
Appendix C (Informative) Minimum Wall Thickness
