Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of the National Center for the Standardization of Daily Sundries.
This standard is issued as first edition.
Daily Rainproof - Poncho and Raincoat
1 Scope
This standard specifies product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of daily rainproof (poncho and raincoat).
This standard is applicable to ponchos and raincoats processed by adopting plastic, waterproof fabric, etc. as main materials.
This standard is not applicable to disposable ponchos or raincoats.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250-2008 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color
GB/T 251-2008 Textiles - Tests for Color Fastness - Grey Scale for Assessing Staining
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attribute - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Force and Elongation at Breaking Force - Strip Method
GB/T 4744 Textiles - Testing and Evaluation for Water Resistance - Hydrostatic Pressure Method
GB/T 5713 Textiles - Tests for Color Fastness - Color Fastness to Water
GB 18401-2010 National General Safety Technical Code for Textile Products
FZ/T 80007.1 Test Method of Peeled off Strength Value for Garments Used Adhesive Interlining
HG/T 2580-2008 Rubber of Plastics-coated Fabrics - Determination of Tensile Strength and Elongation at Break
3 Product Classification
3.1 Products are mainly classified into textile composites and plastic types by material.
3.2 Products are classified into poncho, integrated raincoat and split raincoat by wearing type.
4 Requirements
4.1 Appearance
Products shall be clean, free from stain, broken or cracking phenomena, with clear printing.
4.2 Accessories
4.2.1 Zipper
Zipper shall be flat and smooth with favorable engagement and shall be free from tooth missing and damage.
4.2.2 Button
The button is firm and fit properly and the button positions shall be symmetrical.
4.2.3 Heat sealing strip
Heat sealing is flat and smooth, and the heat sealing strip shall not be less than 16mm in width after adhesion.
4.3 Sewing
The sewing stitching is straight, stitches are uniform and regular, tightness of upper and lower thread is suitable, free from defects like broken stitching or split stitching, the quantity of stitches with length density less than 5cm is at least 13.
4.4 Dimension deviation and mutual deviation
4.4.1 Dimensions of the parts specified in Table 1 shall be indicated.
4.4.2 The dimension deviation of parts of the product shall be in accordance with those specified in Table 1.
Table 1 In: mm
Product type Part dimension deviation
Coat length Chest girth Sleeve length Waist girth Trouser length Hip girth
Raincoat ±20 ±20 ±20 ±20 ±20 ±20
Poncho ±20 ±20 (girth) — — — —
4.4.3 The dimension mutual deviation of parts of the raincoat shall be in accordance with those specified in Table 2.
Table 2 In: mm
Product type Dimension mutual deviation of parts
Top fly and under fly of upper wear Sleeve length Cuff Trouser length Bottom of the trouser legs Top fly and under fly of trouser
Integrated raincoat≤ 5 8 3 10 3 3
Split raincoat≤ 5 8 3 — — —
4.5 Breaking force of fabric
The breaking force of textile composites shall not be less than 200N; the tension breaking force of plastic material shall not be less than 40N.
4.6 Bonding intensity
4.6.1 Bonding force of heat sealing strip
Heat sealing is firm and the bonding force shall not be less than 4.5N.
4.6.2 Bonding force of plastic joint
The bonding force shall not be less than 35N or the joint is free from breaking within the range of deformation limit.
4.7 Color fastness
4.7.1 Color fastness of textile composites
Color fastness of textile composites to water shall not be inferior to Grade 3 specified in GB/T 250-2008 and GB/T 251-2008.
4.7.2 Color fastness of plastic material
Plastic material shall be free from fading.
4.8 Water resistance
The water-pressure resistance of textile composites shall not be less than 20kPa.
4.9 Aging resistance
4.9.1 Under high temperature, the product shall be free from adhesion, discoloration or water wave wrinkle.
4.9.2 Under low temperature, the product shall be free from crack.
4.10 Safety requirements of textile composites
Formaldehyde content and pH shall meet the requirements of Type C, GB 18401-2010; decomposable carcinogenic aromatic amine dyes shall meet those specified in GB 18401-2010.
Foreword i
1 Scope
2 Normative References
3 Product Classification
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transport and Storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of the National Center for the Standardization of Daily Sundries.
This standard is issued as first edition.
Daily Rainproof - Poncho and Raincoat
1 Scope
This standard specifies product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of daily rainproof (poncho and raincoat).
This standard is applicable to ponchos and raincoats processed by adopting plastic, waterproof fabric, etc. as main materials.
This standard is not applicable to disposable ponchos or raincoats.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250-2008 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color
GB/T 251-2008 Textiles - Tests for Color Fastness - Grey Scale for Assessing Staining
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attribute - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Force and Elongation at Breaking Force - Strip Method
GB/T 4744 Textiles - Testing and Evaluation for Water Resistance - Hydrostatic Pressure Method
GB/T 5713 Textiles - Tests for Color Fastness - Color Fastness to Water
GB 18401-2010 National General Safety Technical Code for Textile Products
FZ/T 80007.1 Test Method of Peeled off Strength Value for Garments Used Adhesive Interlining
HG/T 2580-2008 Rubber of Plastics-coated Fabrics - Determination of Tensile Strength and Elongation at Break
3 Product Classification
3.1 Products are mainly classified into textile composites and plastic types by material.
3.2 Products are classified into poncho, integrated raincoat and split raincoat by wearing type.
4 Requirements
4.1 Appearance
Products shall be clean, free from stain, broken or cracking phenomena, with clear printing.
4.2 Accessories
4.2.1 Zipper
Zipper shall be flat and smooth with favorable engagement and shall be free from tooth missing and damage.
4.2.2 Button
The button is firm and fit properly and the button positions shall be symmetrical.
4.2.3 Heat sealing strip
Heat sealing is flat and smooth, and the heat sealing strip shall not be less than 16mm in width after adhesion.
4.3 Sewing
The sewing stitching is straight, stitches are uniform and regular, tightness of upper and lower thread is suitable, free from defects like broken stitching or split stitching, the quantity of stitches with length density less than 5cm is at least 13.
4.4 Dimension deviation and mutual deviation
4.4.1 Dimensions of the parts specified in Table 1 shall be indicated.
4.4.2 The dimension deviation of parts of the product shall be in accordance with those specified in Table 1.
Table 1 In: mm
Product type Part dimension deviation
Coat length Chest girth Sleeve length Waist girth Trouser length Hip girth
Raincoat ±20 ±20 ±20 ±20 ±20 ±20
Poncho ±20 ±20 (girth) — — — —
4.4.3 The dimension mutual deviation of parts of the raincoat shall be in accordance with those specified in Table 2.
Table 2 In: mm
Product type Dimension mutual deviation of parts
Top fly and under fly of upper wear Sleeve length Cuff Trouser length Bottom of the trouser legs Top fly and under fly of trouser
Integrated raincoat≤ 5 8 3 10 3 3
Split raincoat≤ 5 8 3 — — —
4.5 Breaking force of fabric
The breaking force of textile composites shall not be less than 200N; the tension breaking force of plastic material shall not be less than 40N.
4.6 Bonding intensity
4.6.1 Bonding force of heat sealing strip
Heat sealing is firm and the bonding force shall not be less than 4.5N.
4.6.2 Bonding force of plastic joint
The bonding force shall not be less than 35N or the joint is free from breaking within the range of deformation limit.
4.7 Color fastness
4.7.1 Color fastness of textile composites
Color fastness of textile composites to water shall not be inferior to Grade 3 specified in GB/T 250-2008 and GB/T 251-2008.
4.7.2 Color fastness of plastic material
Plastic material shall be free from fading.
4.8 Water resistance
The water-pressure resistance of textile composites shall not be less than 20kPa.
4.9 Aging resistance
4.9.1 Under high temperature, the product shall be free from adhesion, discoloration or water wave wrinkle.
4.9.2 Under low temperature, the product shall be free from crack.
4.10 Safety requirements of textile composites
Formaldehyde content and pH shall meet the requirements of Type C, GB 18401-2010; decomposable carcinogenic aromatic amine dyes shall meet those specified in GB 18401-2010.
Contents of QB/T 4999-2016
Foreword i
1 Scope
2 Normative References
3 Product Classification
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transport and Storage
