1 Scope
This standard specifies the delivery protocol between local switch (LS) and customer premises equipment (CPE) as well as the technical specifications for adapting to the caller identity deliver service of LS and CPE.
This standard is applicable to the realization of caller identity deliver on analog subscriber line based on PSTN.
This standard describes the realization of caller identity deliver service based on PSTN.
This standard excludes all the internetwork signaling between digital stored program control (SPC) switch for caller identity delivery.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) or revisions do not apply. However, the parties who enter into agreement according to this part are encouraged to research whether the latest editions of these documents are applied or not. For undated normative references, the latest edition of the normative document is applicable to this part.
GB 2312 Information Technology - Code of Chinese Graphic Character Set for Information Interchange - Primary Set
GB/T l988 Information Technology - 7-bit Coded Character Set for Information Interchange
GB/T 15279 The Specifications of Automatic Telephone Set
YD/T 868 Technical Requirements and Measuring Methods for Additional Equipment for Telephone Set
YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment
YD/T 968 Limits and Methods of Measurement of Electromagnetic Compatibility for Telecommunication Terminal Equipment
YD/T 1157 The Transfer of Calling Party Number between Operators
3 Definitions and Abbreviations
3.1 Definitions
Customer Premises Equipment (CPE): terminal equipment with caller identity reception and display function, and/or message edit and delivery function.
User: the object using CPE to control or obtain caller identity.
Originating switch: the LS at calling terminal.
Terminal switch: the LS at called terminal.
Ring burst: the ringing current signal before the first ring, which is sent by the terminal switch. The level and frequency of ring burst are the same as those of the common ringing signals, while its duration and interval are indefinite.
Foreword I
Introduction
1 Scope
2 Normative References
3 Definitions and Abbreviations
3.1 Definitions
3.2 Abbreviations
4 Service Description
4.1 Basic Implementation Method
4.2 Delivery Method
4.3 Service Realization
4.4 Delivery Content
4.5 Relationship between CID Service and Other New Services
5 Delivery Protocol of FSK Signalling
5.1 Physical Layer
5.2 Data Link Layer
5.3 Message Layer
6 Delivery Protocol of DTMF Signalling
6.1 Physical Layer
6.2 Data Link Layer
6.3 Message Layer
7 Technical Requirements for Local Switch
7.1 Function Requirements
7.2 Requirements for Output Signal
7.3 Ability of Signal Reception
8 Technical Requirements for CPE
8.1 Function Requirements
8.2 Requirement for Identifying Message Data Format by FSK Signal
8.3 Requirement for Adaptive Capacity of Physical Layer Signal Change
8.4 Requirement for Time Characteristic by FSK Delivery
8.5 Requirement for Time Characteristic by DTMF delivery
8.6 Special Requirements for FSK Class 2 Machine
8.7 Related Technical Requirements for CPE Compatible with Information Uploading
8.8 Requirement for Electromagnetic Compatibility
8.9 Safety Requirement
Appendix A (Normative) Supplementary Specification for Caller Identity Information Delivery under Call State
Appendix B (Normative) Delivery Process and Protocol of Subscriber Information
Appendix C (Normative Appendix) Related Requirements for Local Switch Compatible with Information Service
Standard
YD/T 1277.1-2003 Technical specification and testing method of caller identity delivery based on PSTN part 1:technical specification (English Version)
Standard No.
YD/T 1277.1-2003
Status
abolished
Language
English
File Format
PDF
Word Count
10000 words
Price(USD)
250.0
Implemented on
2003-6-5
Delivery
via email in 1 business day
Detail of YD/T 1277.1-2003
Standard No.
YD/T 1277.1-2003
English Name
Technical specification and testing method of caller identity delivery based on PSTN part 1:technical specification
1 Scope
This standard specifies the delivery protocol between local switch (LS) and customer premises equipment (CPE) as well as the technical specifications for adapting to the caller identity deliver service of LS and CPE.
This standard is applicable to the realization of caller identity deliver on analog subscriber line based on PSTN.
This standard describes the realization of caller identity deliver service based on PSTN.
This standard excludes all the internetwork signaling between digital stored program control (SPC) switch for caller identity delivery.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) or revisions do not apply. However, the parties who enter into agreement according to this part are encouraged to research whether the latest editions of these documents are applied or not. For undated normative references, the latest edition of the normative document is applicable to this part.
GB 2312 Information Technology - Code of Chinese Graphic Character Set for Information Interchange - Primary Set
GB/T l988 Information Technology - 7-bit Coded Character Set for Information Interchange
GB/T 15279 The Specifications of Automatic Telephone Set
YD/T 868 Technical Requirements and Measuring Methods for Additional Equipment for Telephone Set
YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment
YD/T 968 Limits and Methods of Measurement of Electromagnetic Compatibility for Telecommunication Terminal Equipment
YD/T 1157 The Transfer of Calling Party Number between Operators
3 Definitions and Abbreviations
3.1 Definitions
Customer Premises Equipment (CPE): terminal equipment with caller identity reception and display function, and/or message edit and delivery function.
User: the object using CPE to control or obtain caller identity.
Originating switch: the LS at calling terminal.
Terminal switch: the LS at called terminal.
Ring burst: the ringing current signal before the first ring, which is sent by the terminal switch. The level and frequency of ring burst are the same as those of the common ringing signals, while its duration and interval are indefinite.
Contents of YD/T 1277.1-2003
Foreword I
Introduction
1 Scope
2 Normative References
3 Definitions and Abbreviations
3.1 Definitions
3.2 Abbreviations
4 Service Description
4.1 Basic Implementation Method
4.2 Delivery Method
4.3 Service Realization
4.4 Delivery Content
4.5 Relationship between CID Service and Other New Services
5 Delivery Protocol of FSK Signalling
5.1 Physical Layer
5.2 Data Link Layer
5.3 Message Layer
6 Delivery Protocol of DTMF Signalling
6.1 Physical Layer
6.2 Data Link Layer
6.3 Message Layer
7 Technical Requirements for Local Switch
7.1 Function Requirements
7.2 Requirements for Output Signal
7.3 Ability of Signal Reception
8 Technical Requirements for CPE
8.1 Function Requirements
8.2 Requirement for Identifying Message Data Format by FSK Signal
8.3 Requirement for Adaptive Capacity of Physical Layer Signal Change
8.4 Requirement for Time Characteristic by FSK Delivery
8.5 Requirement for Time Characteristic by DTMF delivery
8.6 Special Requirements for FSK Class 2 Machine
8.7 Related Technical Requirements for CPE Compatible with Information Uploading
8.8 Requirement for Electromagnetic Compatibility
8.9 Safety Requirement
Appendix A (Normative) Supplementary Specification for Caller Identity Information Delivery under Call State
Appendix B (Normative) Delivery Process and Protocol of Subscriber Information
Appendix C (Normative Appendix) Related Requirements for Local Switch Compatible with Information Service
