Standard No.:	YD/T 1576.23-2013
English Name:	Test method of mobile station(including non UIM mobile station)for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network part 23:protocol conformance test/data service signaling
Chinese Name:	800MHz/2GHz cdma2000数字蜂窝移动通信网设备测试方法 移动台（含机卡一体） 第23部分：协议一致性 数据业务信令
Professional Classification:	YD    Professional Standard - Telecommunication
Source Content Issued by:	Ministry of Industry and Information Technology
Issued on:	2013-04-25
Implemented on:	2013-6-1
Status:	valid
Superseding:	YDC 024-2006 General Test Specification of 800MHz CDMA 1X : Mobile Station Part Volume Ⅱ Protocol Conformance Test Part
Target Language:	English
File Format:	PDF
Word Count:	20000 words
Translation Price(USD):	980.0
Delivery:	via email in 1 business day

This standard specifies the signaling conformance test method for high speed packet data (HSPD) of mobile station for 800MHz/2GHz cdma2000 digital cellular mobile. It is applicable to 800MHz/2GHz cdma2000 mobile communication terminals supporting CSIM/RUIM card (UIM Mobile Station) and not supporting CSIM/RUIM card (Non UIM Mobile Station) (hereinafter referred to mobile terminal). The CSIM/RUIM card includes that supporting UIMID and EUIMID. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference, the latest edition (including all the amendments) applies. 3GPP2 C.S0017-004-A Data Service Options for Spread Spectrum Systems: Async Data and Fax Services 3 Abbreviations For the purposes of this document, the following abbreviations apply. ... ... ... ... 4 Overview Test shall be carried out in normal test environment which refers to the combination of the following various defined conditions: ——Temperature: 10℃ ~ 35℃; ——Relative humidity: 5% ~ 85%; —— Power supply: nominal value given by the manufacturer; ——Vibration: negligible; ——Test frequency point: General 283 Channel or 384 Channel may be used, and other frequency points may also be used. Figure 1 shows the reference test environment and the connection of instruments.

Foreword i 1 Scope 2 Normative References 3 Abbreviations 4 Overview 5 High Speed Data Service Test 5.1 Forward File Transfer 5.2 Reverse File Transfer 5.3 Bi-directional File Transfer 5.4 Service Option Control Message Processing (Optional) 5.5 Changing Encoding Type on Supplemental Channel during Hard Handoff 5.6 Control Hold Mode Transitions (Optional) 5.7 Soft Handoff of Fundamental Channel and Supplemental Channels 5.8 Soft Handoff of Fundamental Channel or Dedicated Control Channel Only 5.9 Adding Supplemental Channels during Soft Handoff 5.10 Hard Handoff during Data Transfer 5.11 Hard Handoff to a Different Radio Configuration 5.12 Mobile Terminal Packet Data Inactivity Timer 5.13 Mobile Terminal and SS Operating in Different States 5.14 RLP Operation in Rayleigh Fading Environment 5.15 Release Order Processing 5.16 Hysteresis Activation Timer 5.17 Hysteresis Timer 5.18 Fundamental Supplemental Channel Assignment Setting and Single Assignment 5.19 Turbo Coding on Supplemental Channel 5.20 Correct Walsh Cover 5.21 Supplemental Channel Discontinuous Transmission 5.22 Slotted Timer 5.23 Retry Order and Delay Test 5.24 Retry Order and Delay for Supplemental Channel Request Messages 5.25 Retry Order and Delay for Resource Request Messages 5.26 Mobile Terminal Aborts R-SCH 5.27 Mobile Terminal Originated Short Data Burst 5.28 Mobile Terminal Terminated Short Data Burst 5.29 Mobile Terminal Assisted Burst Operation Parameters Message Test 5.30 SS Ignores Mobile Terminal Requested Mode Transitions 5.31 Mobile Terminal Multiplex Option different from SS Multiplex Option