SDH-based MSTP network management technical specification -Part 2: NMS function
1 Scope
This part specifies the functional requirements of the SDH-based MSTP NMS, mainly including topology management, configuration management, path management, protection management, fault management and performance management.
This part is applicable to the SDH-based MSTP NMS.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
YD/T 1289.3-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 3: Network management system (NMS) function
YD/T 1345-2005 Technical requirements for SDH-based MSTP embedded with RPR
YD/T 1474-2006 Technical requirements of multi-service transport platform (MSTP) based on SDH - Embedded with MPLS function
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1.1 SDH-based multi-service transport platform
SDH-based multi-service platform which realizes access, processing and transport of multiple services such as TDM, ATM and Ethernet simultaneously, and provides uniform network management
3.1.2 network management system
SDH transport NMS, namely, a software and hardware system used to manage the SDH transport network, which provides an end-to-end network view of the whole network, and is able to manage SDH NEs or SDH subnetworks provided by different device suppliers in the network
3.1.3 element management system
SDH transport EMS, namely, a software and hardware system used to manage one or more SDH NEs, which manages SDH NEs or SDH subnetworks provided by a single-device supplier
Note: The EMS given in this part refers to the EMS and SNMS collectively in the traditional sense.
3.2 Abbreviations
For the purposes of this part, the following abbreviations apply.
ATM Asynchronous Transport Mode
CBR Constant Bit Rate
CBS Committed Burst Size
CIR Committed Information Rate
CoS Class of Service
EBS Excess Burst Size
EMS Element Management System
Foreword II
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 NMS architecture
5 Functional requirements
5.1 Use case
5.2 Topology management
5.3 Configuration management
5.4 VCG path/SDH path management
5.5 Protection management
5.6 Fault management
5.7 Performance management
5.8 Report management
5.9 Security management
5.10 System management
Bibliography
SDH-based MSTP network management technical specification -Part 2: NMS function
1 Scope
This part specifies the functional requirements of the SDH-based MSTP NMS, mainly including topology management, configuration management, path management, protection management, fault management and performance management.
This part is applicable to the SDH-based MSTP NMS.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
YD/T 1289.3-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 3: Network management system (NMS) function
YD/T 1345-2005 Technical requirements for SDH-based MSTP embedded with RPR
YD/T 1474-2006 Technical requirements of multi-service transport platform (MSTP) based on SDH - Embedded with MPLS function
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1.1 SDH-based multi-service transport platform
SDH-based multi-service platform which realizes access, processing and transport of multiple services such as TDM, ATM and Ethernet simultaneously, and provides uniform network management
3.1.2 network management system
SDH transport NMS, namely, a software and hardware system used to manage the SDH transport network, which provides an end-to-end network view of the whole network, and is able to manage SDH NEs or SDH subnetworks provided by different device suppliers in the network
3.1.3 element management system
SDH transport EMS, namely, a software and hardware system used to manage one or more SDH NEs, which manages SDH NEs or SDH subnetworks provided by a single-device supplier
Note: The EMS given in this part refers to the EMS and SNMS collectively in the traditional sense.
3.2 Abbreviations
For the purposes of this part, the following abbreviations apply.
ATM Asynchronous Transport Mode
CBR Constant Bit Rate
CBS Committed Burst Size
CIR Committed Information Rate
CoS Class of Service
EBS Excess Burst Size
EMS Element Management System
Contents of YD/T 1620.2-2007
Foreword II
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 NMS architecture
5 Functional requirements
5.1 Use case
5.2 Topology management
5.3 Configuration management
5.4 VCG path/SDH path management
5.5 Protection management
5.6 Fault management
5.7 Performance management
5.8 Report management
5.9 Security management
5.10 System management
Bibliography
