Technical specification for SDH-based MSTP network management system - Part 1: Basic principle
1 Scope
This part regulates the basic principles for formulating some standards of Technical specification for SDH-based MSTP network management system series, and specifies the SDH-based MSTP network management system, as well as the methodology adopted in formulating this part of standards, the management interface position defined and the communication protocol stack used.
This part is applicable to SDH-based MSTP network management systems.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
YD/T 1238-2002 Technical requirements for SDH multi-service transport platform
YD/T 1345-2005 Technical requirements for SDH-based MSTP embedded with RPR
YD/T 1289.1-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 1: Basic principle
ITU-T G.8011 (2004) Ethernet over transport - Ethernet services framework
ITU-T M.3020 (1999) TMN interface specification methodology
ITU-T Q.811 Lower layer protocol profiles for the Q3 and X interfaces
ITU-T Q.812 Upper layer protocol profiles for the Q3 and X interfaces
ITU-T G.784 Synchronous digital hierarchy (SDH) management
OMG The common object request broker: architecture and specification
OMG CORBA service: Common object services specification
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1.1 SDH-based MSTP
SDH-based multi-service platform which realizes access, processing and transport of multiple services such as TDM, ATM and Ethernet simultaneously, and provides uniform network management
3.1.2 network management system (NMS)
MSTP NMS, namely, a software and hardware system used to manage the MSTP network, which provides an end-to-end network view of the whole network, and is able to manage MSTP NEs or MSTP subnetworks provided by different device suppliers in the network
3.1.3 element management system (EMS)
MSTP EMS, namely, a software and hardware system used to manage one or more MSTP NEs, which manages MSTP NEs or MSTP subnetworks provided by a single device provider
Note: The EMS given in this part refers to the EMS and SNMS collectively in the traditional sense.
3.1.4 EMS-NMS interface
exchange mechanism of communication data and data between MSTP-NMS and MSTP-EMS
3.1.5 UNI-C
customer side of user network interface
Foreword II
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 MSTP transport network management requirements
4.1 SDH-based MSTP service network model
4.2 MSTP NE types
4.3 Data service types carried by MSTP
5 MSTP transport network management architecture
5.1 Relationship among MSTP network management, SDH and data NMS
5.2 MSTP transport network management architecture
5.3 MSTP network management function modules
6 Standard composition of technical requirements for SDH-based MSTP network management and its relationship with SDH standard
7 Methodology used in this part
8 Protocol stack adopted by network management interface
Technical specification for SDH-based MSTP network management system - Part 1: Basic principle
1 Scope
This part regulates the basic principles for formulating some standards of Technical specification for SDH-based MSTP network management system series, and specifies the SDH-based MSTP network management system, as well as the methodology adopted in formulating this part of standards, the management interface position defined and the communication protocol stack used.
This part is applicable to SDH-based MSTP network management systems.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
YD/T 1238-2002 Technical requirements for SDH multi-service transport platform
YD/T 1345-2005 Technical requirements for SDH-based MSTP embedded with RPR
YD/T 1289.1-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 1: Basic principle
ITU-T G.8011 (2004) Ethernet over transport - Ethernet services framework
ITU-T M.3020 (1999) TMN interface specification methodology
ITU-T Q.811 Lower layer protocol profiles for the Q3 and X interfaces
ITU-T Q.812 Upper layer protocol profiles for the Q3 and X interfaces
ITU-T G.784 Synchronous digital hierarchy (SDH) management
OMG The common object request broker: architecture and specification
OMG CORBA service: Common object services specification
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1.1 SDH-based MSTP
SDH-based multi-service platform which realizes access, processing and transport of multiple services such as TDM, ATM and Ethernet simultaneously, and provides uniform network management
3.1.2 network management system (NMS)
MSTP NMS, namely, a software and hardware system used to manage the MSTP network, which provides an end-to-end network view of the whole network, and is able to manage MSTP NEs or MSTP subnetworks provided by different device suppliers in the network
3.1.3 element management system (EMS)
MSTP EMS, namely, a software and hardware system used to manage one or more MSTP NEs, which manages MSTP NEs or MSTP subnetworks provided by a single device provider
Note: The EMS given in this part refers to the EMS and SNMS collectively in the traditional sense.
3.1.4 EMS-NMS interface
exchange mechanism of communication data and data between MSTP-NMS and MSTP-EMS
3.1.5 UNI-C
customer side of user network interface
Contents of YD/T 1768.1-2008
Foreword II
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 MSTP transport network management requirements
4.1 SDH-based MSTP service network model
4.2 MSTP NE types
4.3 Data service types carried by MSTP
5 MSTP transport network management architecture
5.1 Relationship among MSTP network management, SDH and data NMS
5.2 MSTP transport network management architecture
5.3 MSTP network management function modules
6 Standard composition of technical requirements for SDH-based MSTP network management and its relationship with SDH standard
7 Methodology used in this part
8 Protocol stack adopted by network management interface
