YY/T 0698.7-2009 Packaging materials for terminal sterilized medical devices - Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide (English Version)
Packaging materials for terminal sterilized medical devices - Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide
Packaging materials for terminal sterilized medical devices -
Part 7：Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation -
Requirements and test methods
1 Scope
This part of YY/T 0698 specifies the requirements and test methods for the manufacture of sealable adhesive coated paper meeting those specified in YY/T 0698.6. The packaging materials are used as the packaging of medical devices terminally subjected to sterilization by ethylene oxide or irradiation.
No requirements are added to the general requirements of ISO 11607-1 in this part, only guidelines are provided for elements on the basis of ISO 11607-1 and relevant national standards. Therefore, the specific requirements in 4.2~4.3 may be used to confirm one or more requirements of ISO 11607-1, but not all requirements.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of YY/T 0698. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part of YY/T 0698. However parties to agreements based on this part of YY/T 0698 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 451.2 Paper and board - Determination of grammage (GB/T 451.2-2002; eqv ISO 536: 1995)
GB/T 454 Paper - Determination of bursting strength (GB/T 454-2002; idt ISO 2758: 2001)
GB/T 455 Paper and board - Determination of tearing resistance (GB/T 455-2002; eqv ISO 1974: 1990)
GB/T 458 Paper and board - Determination of air permeance (GB/T 458-2008; ISO 5636-2: 1984; ISO 5636-3: 1992; ISO 5636-5: 2003, MOD)
GB/T 465.1 Paper and board - Determination of bursting strength after immersion in water (GB/T 465.1-2008; ISO 3689: 1983, IDT)
GB/T 465.2 Paper and board - Determination of tensile strength after immersion in water (GB/T 465.2-2008; ISO 3781: 1983, IDT)
GB/T 1540 Paper and board - Determination of water absorption - Cobb method (GB/T 1540-2002; neq ISO 535: 1991)
GB/T 1545.2 Paper, board and pulp - Determination of pH of aqueous extracts (GB/T 1545.2-2003; mod ISO 6588: 1981)
GB/T 2678.6 Paper, board and pulp - Determination of water soluble sulphates (Conductimetric titration method) (GB/T 2678.6-1996; eqv ISO 9198: 1989)
GB/T 7408 Data elements and interchange formats - Information interchange - Representation of dates and times (GB/T 7408 2005; ISO 8601: 2000, IDT)
GB/T 7974-2002 Paper, board and pulp - Measurement of brightness - Diff/Geometry (neq ISO 2470: 1999)
GB/T 12914 Paper and board - Determination of tensile properties (GB/T 12914-2008; ISO 1924-2: 1994, MOD)
ISO 6588-2: 2005 Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot extraction
ISO 9197 Paper, board and pulps - Determination of water-soluble chlorides
ISO 11607-1 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems
3 Terms and definitions
For the purpose of this part of YY/T 0698, the terms and definitions given in ISO 11607-1 apply.
4 Requirements
4.1 General
The requirements of ISO 11607-1 apply.
Note: The following specific requirements and test methods may be used to confirm one or more requirements of ISO 11607-1, but not all requirements.
Foreword i
Introduction iii
1 Scope
2 Normative references
3 Terms and definitions
5 Information to be supplied by the manufacturer
Annex A (Normative) Method for the determination of water repellency
Annex B (Normative) Method for the determination of pore size
Annex C (Normative) Method for determination of regularity of seal adhesive coatings on paper
Annex D (Normative) Method for the determination of mass per unit area of uncoated paper and adhesive coating
Annex E (Normative) Method for the determination of seal strength of the adhesive coating
Bibliography
YY/T 0698.7-2009 Packaging materials for terminal sterilized medical devices - Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide (English Version)
Standard No.
YY/T 0698.7-2009
Status
valid
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
190.0
Implemented on
2010-12-1
Delivery
via email in 1 business day
Detail of YY/T 0698.7-2009
Standard No.
YY/T 0698.7-2009
English Name
Packaging materials for terminal sterilized medical devices - Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide
Packaging materials for terminal sterilized medical devices -
Part 7：Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation -
Requirements and test methods
1 Scope
This part of YY/T 0698 specifies the requirements and test methods for the manufacture of sealable adhesive coated paper meeting those specified in YY/T 0698.6. The packaging materials are used as the packaging of medical devices terminally subjected to sterilization by ethylene oxide or irradiation.
No requirements are added to the general requirements of ISO 11607-1 in this part, only guidelines are provided for elements on the basis of ISO 11607-1 and relevant national standards. Therefore, the specific requirements in 4.2~4.3 may be used to confirm one or more requirements of ISO 11607-1, but not all requirements.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of YY/T 0698. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part of YY/T 0698. However parties to agreements based on this part of YY/T 0698 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 451.2 Paper and board - Determination of grammage (GB/T 451.2-2002; eqv ISO 536: 1995)
GB/T 454 Paper - Determination of bursting strength (GB/T 454-2002; idt ISO 2758: 2001)
GB/T 455 Paper and board - Determination of tearing resistance (GB/T 455-2002; eqv ISO 1974: 1990)
GB/T 458 Paper and board - Determination of air permeance (GB/T 458-2008; ISO 5636-2: 1984; ISO 5636-3: 1992; ISO 5636-5: 2003, MOD)
GB/T 465.1 Paper and board - Determination of bursting strength after immersion in water (GB/T 465.1-2008; ISO 3689: 1983, IDT)
GB/T 465.2 Paper and board - Determination of tensile strength after immersion in water (GB/T 465.2-2008; ISO 3781: 1983, IDT)
GB/T 1540 Paper and board - Determination of water absorption - Cobb method (GB/T 1540-2002; neq ISO 535: 1991)
GB/T 1545.2 Paper, board and pulp - Determination of pH of aqueous extracts (GB/T 1545.2-2003; mod ISO 6588: 1981)
GB/T 2678.6 Paper, board and pulp - Determination of water soluble sulphates (Conductimetric titration method) (GB/T 2678.6-1996; eqv ISO 9198: 1989)
GB/T 7408 Data elements and interchange formats - Information interchange - Representation of dates and times (GB/T 7408 2005; ISO 8601: 2000, IDT)
GB/T 7974-2002 Paper, board and pulp - Measurement of brightness - Diff/Geometry (neq ISO 2470: 1999)
GB/T 12914 Paper and board - Determination of tensile properties (GB/T 12914-2008; ISO 1924-2: 1994, MOD)
ISO 6588-2: 2005 Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot extraction
ISO 9197 Paper, board and pulps - Determination of water-soluble chlorides
ISO 11607-1 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems
3 Terms and definitions
For the purpose of this part of YY/T 0698, the terms and definitions given in ISO 11607-1 apply.
4 Requirements
4.1 General
The requirements of ISO 11607-1 apply.
Note: The following specific requirements and test methods may be used to confirm one or more requirements of ISO 11607-1, but not all requirements.
Contents of YY/T 0698.7-2009
Foreword i
Introduction iii
1 Scope
2 Normative references
3 Terms and definitions
5 Information to be supplied by the manufacturer
Annex A (Normative) Method for the determination of water repellency
Annex B (Normative) Method for the determination of pore size
Annex C (Normative) Method for determination of regularity of seal adhesive coatings on paper
Annex D (Normative) Method for the determination of mass per unit area of uncoated paper and adhesive coating
Annex E (Normative) Method for the determination of seal strength of the adhesive coating
Bibliography
