Chapter 1 General Provisions
Article 1 [legislation purpose] For the purpose of strengthening the safety management for the transportation of radioactive articles and implementing transport safety licensing system specified in Regulation on the Administration of Transport Safety of Radioactive Articles, the Measures is established.
Article 2 [application scope] The organization engaged in the transportation of radioactive articles and the design and manufacture of transport containers for radioactive articles, shall transact relevant licensing and record formalities according to the requirements of the Measures.
Article 3 [classification management] The transportation of the radioactive articles is managed by classification and the radioactive articles are classified into Categories I, II and III according to their characteristics and the degree of their potential hazard to human health and environment.
The specific classification and list of radioactive articles will be prepared by the nuclear safety regulatory authority of the State Council in conjunction with the competent departments in public security, health, customs, transport, railway, civil aviation and nuclear industry of the State Council, according to the requirements of Regulation on the Administration of Transport Safety of Radioactive Articles.
Chapter 2 Approval and Record for the Design of Transport Container
Article 4 [basic design requirements] The design of transport containers for Category I radioactive articles shall be submitted to the nuclear safety regulatory authority of the State Council for examination and approval before it is used for manufacturing for the first time.
The design of transport containers for Category II radioactive articles shall be submitted to the nuclear safety regulatory authority of the State Council for record before it is used for manufacturing for the first time.
Article 5 [design record] The design organization of transport containers for radioactive articles shall establish, improve and effectively implement quality assurance system, strengthen the file management and shall faithfully record the evaluation process of the design and safety performance of transport containers for radioactive articles.
Article 6 [safety performance assessment] The design of transport containers for radioactive articles shall meet the requirements of national standards for transport safety of radioactive articles.
The design organization shall assess the safety performance of the designed transport containers for radioactive articles by adopting test verification or reliable and conservative analysis and demonstration, or the combination of both the methods.
Article 7 [requirements for the design organization] The organization applying for the design approval letter of transport containers for Category I radioactive articles shall meet the following requirements:
(1) Having corporate capacity;
(2) Having the work performance related or similar to the engaged design activities;
(3) Having the professionals who adapt to the engaged design activities and have passed the examination;
(4) Having a complete management system, a sound quality assurance system, and a quality assurance program consistent with the relevant nuclear safety regulatory rules of the nation.
Article 8 [design application] To apply for approval of the design of transport containers for Category I radioactive articles, the design organization shall submit a written application, together with the following materials to the nuclear safety regulatory authority of the State Council:
(1) The general design drawing and its design instructions;
(2) The design safety evaluation report;
(3) The quality assurance program in accordance with relevant nuclear safety regulatory rules of the nation.
The standard format and content of design safety evaluation report of transport containers for radioactive articles will be otherwise specified by the nuclear safety regulatory authority of the State Council.
Article 9 [design review] The nuclear safety regulatory authority of the State Council shall complete the review within 45 workdays upon the acceptance of design approval application of transport containers for Category I radioactive articles, and shall issue the design approval letter of transport containers for Category I radioactive articles if the design meets the national standards for transport safety of radioactive articles with the announcement of the design approval No., and shall inform the application organization in written form, together with the rejection reason, if the design fails to meet the national standards for transport safety of radioactive articles.
In the process of review, the nuclear safety regulatory authority of the State Council shall organize the experts to carry out technical evaluation in the forms of document review, post-review discussion, site witness, etc.
The time required for technical evaluation will not be included within the specified period of Item I of this article.
Article 10 [design approval letter] The design approval letter of transport containers for Category I radioactive articles shall include the following main contents:
(1) The name, address and legal representative of design organization;
(2) The type and design approval No. of the transport container;
(3) The characteristic of radioactive contents;
(4) The design description of transport container and applicable relevant technical standards;
(5) Operation requirement, transportation mode and operating ambient temperature;
(6) Validity period;
(7) Approval date and approval letter No.
Article 11 [design approval continuity] The validity period of design approval letter of transport containers for Category I radioactive articles is 5 years.
In the case the validity period of design approval letter expires and needs to be continued, the certificate holder shall submit the continuity application in written form with the following materials to the nuclear safety regulatory authority of the State Council at least 6 months before the expiration of the design approval letter:
(1) The copy of original design approval letter;
(2) The description of implementation effect of quality assurance program;
(3) The description whether meeting the new standard if the reference standards of design change.
For the continuity application of approval letter proposed by the design organization, the nuclear safety regulatory authority of the State Council shall make the decision about approval of the continuity before the expiration of design approval letter.
Article 12 [design change] When modifying the safety-related content in the approved design of transport containers for Category I radioactive articles, the design organization shall apply for the design approval letter again from the nuclear safety regulatory authority of the State Council according to the original application procedures.
Should any design organization of transport containers for Category I radioactive articles change its name, address or legal representative, it shall transact the change formalities of design approval letter with and submit the change application, documentation of its registration with the Administration for Industry and Commerce, and other certification materials to the nuclear safety regulatory authority of the State Council within 20 days upon the registration of industrial and commercial changes.
Chapter 1 General Provisions
Chapter 2 Approval and Record for the Design of Transport Container
Chapter 3 Licensing and Record for Manufacturing of Transport Container
Chapter 4 Transportation Approval and Record of Radioactive Articles
Chapter 5 Supplementary Provisions
Chapter 1 General Provisions
Article 1 [legislation purpose] For the purpose of strengthening the safety management for the transportation of radioactive articles and implementing transport safety licensing system specified in Regulation on the Administration of Transport Safety of Radioactive Articles, the Measures is established.
Article 2 [application scope] The organization engaged in the transportation of radioactive articles and the design and manufacture of transport containers for radioactive articles, shall transact relevant licensing and record formalities according to the requirements of the Measures.
Article 3 [classification management] The transportation of the radioactive articles is managed by classification and the radioactive articles are classified into Categories I, II and III according to their characteristics and the degree of their potential hazard to human health and environment.
The specific classification and list of radioactive articles will be prepared by the nuclear safety regulatory authority of the State Council in conjunction with the competent departments in public security, health, customs, transport, railway, civil aviation and nuclear industry of the State Council, according to the requirements of Regulation on the Administration of Transport Safety of Radioactive Articles.
Chapter 2 Approval and Record for the Design of Transport Container
Article 4 [basic design requirements] The design of transport containers for Category I radioactive articles shall be submitted to the nuclear safety regulatory authority of the State Council for examination and approval before it is used for manufacturing for the first time.
The design of transport containers for Category II radioactive articles shall be submitted to the nuclear safety regulatory authority of the State Council for record before it is used for manufacturing for the first time.
Article 5 [design record] The design organization of transport containers for radioactive articles shall establish, improve and effectively implement quality assurance system, strengthen the file management and shall faithfully record the evaluation process of the design and safety performance of transport containers for radioactive articles.
Article 6 [safety performance assessment] The design of transport containers for radioactive articles shall meet the requirements of national standards for transport safety of radioactive articles.
The design organization shall assess the safety performance of the designed transport containers for radioactive articles by adopting test verification or reliable and conservative analysis and demonstration, or the combination of both the methods.
Article 7 [requirements for the design organization] The organization applying for the design approval letter of transport containers for Category I radioactive articles shall meet the following requirements:
(1) Having corporate capacity;
(2) Having the work performance related or similar to the engaged design activities;
(3) Having the professionals who adapt to the engaged design activities and have passed the examination;
(4) Having a complete management system, a sound quality assurance system, and a quality assurance program consistent with the relevant nuclear safety regulatory rules of the nation.
Article 8 [design application] To apply for approval of the design of transport containers for Category I radioactive articles, the design organization shall submit a written application, together with the following materials to the nuclear safety regulatory authority of the State Council:
(1) The general design drawing and its design instructions;
(2) The design safety evaluation report;
(3) The quality assurance program in accordance with relevant nuclear safety regulatory rules of the nation.
The standard format and content of design safety evaluation report of transport containers for radioactive articles will be otherwise specified by the nuclear safety regulatory authority of the State Council.
Article 9 [design review] The nuclear safety regulatory authority of the State Council shall complete the review within 45 workdays upon the acceptance of design approval application of transport containers for Category I radioactive articles, and shall issue the design approval letter of transport containers for Category I radioactive articles if the design meets the national standards for transport safety of radioactive articles with the announcement of the design approval No., and shall inform the application organization in written form, together with the rejection reason, if the design fails to meet the national standards for transport safety of radioactive articles.
In the process of review, the nuclear safety regulatory authority of the State Council shall organize the experts to carry out technical evaluation in the forms of document review, post-review discussion, site witness, etc.
The time required for technical evaluation will not be included within the specified period of Item I of this article.
Article 10 [design approval letter] The design approval letter of transport containers for Category I radioactive articles shall include the following main contents:
(1) The name, address and legal representative of design organization;
(2) The type and design approval No. of the transport container;
(3) The characteristic of radioactive contents;
(4) The design description of transport container and applicable relevant technical standards;
(5) Operation requirement, transportation mode and operating ambient temperature;
(6) Validity period;
(7) Approval date and approval letter No.
Article 11 [design approval continuity] The validity period of design approval letter of transport containers for Category I radioactive articles is 5 years.
In the case the validity period of design approval letter expires and needs to be continued, the certificate holder shall submit the continuity application in written form with the following materials to the nuclear safety regulatory authority of the State Council at least 6 months before the expiration of the design approval letter:
(1) The copy of original design approval letter;
(2) The description of implementation effect of quality assurance program;
(3) The description whether meeting the new standard if the reference standards of design change.
For the continuity application of approval letter proposed by the design organization, the nuclear safety regulatory authority of the State Council shall make the decision about approval of the continuity before the expiration of design approval letter.
Article 12 [design change] When modifying the safety-related content in the approved design of transport containers for Category I radioactive articles, the design organization shall apply for the design approval letter again from the nuclear safety regulatory authority of the State Council according to the original application procedures.
Should any design organization of transport containers for Category I radioactive articles change its name, address or legal representative, it shall transact the change formalities of design approval letter with and submit the change application, documentation of its registration with the Administration for Industry and Commerce, and other certification materials to the nuclear safety regulatory authority of the State Council within 20 days upon the registration of industrial and commercial changes.
Contents of 000014672/2010-00750
Chapter 1 General Provisions
Chapter 2 Approval and Record for the Design of Transport Container
Chapter 3 Licensing and Record for Manufacturing of Transport Container
Chapter 4 Transportation Approval and Record of Radioactive Articles
Chapter 5 Supplementary Provisions
