1 Scope
This standard specifies the method of test for determining the underarm seam strength with constant rate of extension (CRE) testing machine.
This standard is applicable to knitted garments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6529 Textiles - Standard Atmospheres for Conditioning and Testing
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
constant rate of extension (CRE) testing machine
a kind of test instrument to make direct ratio between specimen extension and time when one clamper for clamping specimen is fixed and the other moves at constant speed throughout the test
3.2
gauge length
distance between two effective clamping points for clamping specimen on test device
3.3
seam strength
the maximum tensile force applied to the specimen (with a seam) in the direction perpendicular to the seam under the specified conditions until the seam ruptures
4 Principle
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Instruments
6 Standard Atmosphere for Conditioning and Test
7 Specimen Preparation
8 Test Steps
9 Test Report
1 Scope
This standard specifies the method of test for determining the underarm seam strength with constant rate of extension (CRE) testing machine.
This standard is applicable to knitted garments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6529 Textiles - Standard Atmospheres for Conditioning and Testing
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
constant rate of extension (CRE) testing machine
a kind of test instrument to make direct ratio between specimen extension and time when one clamper for clamping specimen is fixed and the other moves at constant speed throughout the test
3.2
gauge length
distance between two effective clamping points for clamping specimen on test device
3.3
seam strength
the maximum tensile force applied to the specimen (with a seam) in the direction perpendicular to the seam under the specified conditions until the seam ruptures
4 Principle
Contents of FZ/T 70007-2015
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Instruments
6 Standard Atmosphere for Conditioning and Test
7 Specimen Preparation
8 Test Steps
9 Test Report
