1 Scope
This standard specifies terms and definitions, classification, protection degree, general requirements, test, inspection rules, marking and operation instruction of fire emergency lighting and evacuate indicating system.
This standard is applicable to fire emergency lighting and evacuate indicating system (hereinafter referred to as "system") installed and used in general industrial and civil buildings and to the system installed in other environment and with specific requirements (except unless otherwise specified by relevant standard).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB 4208-2008 "Degrees of Protection Provided by Enclosure (IP Code)" (IEC60529:2001, IDT)
GB 7000.1-2007 "Luminaires-Part 1: General Requirements and Tests" (IEC60598-1:2003, IDT)
GB/T 9969 "General Principles for Preparation of Instructions for Use of Industrial Products"
GB 12978 "Rules for Test of Fire Electronic Products"
GB 13495 "Fire Safety Signs" (GB13495-1992, neq ISO 6309:1987)
GB 16838 "Environmental Test Methods and Severities for Fire Electronic Products"
GB 50054 "Code for Design of Low Voltage Electrical Installations"
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 Fire emergency lighting and evacuate indicating system
System which provides lighting and evacuate indicating for personnel evacuation and fire fighting work and consists of various fire emergency luminaires and relevant devices.
3.2 Fire emergency luminaire
Various luminaires which provide lighting and marking for personnel evacuation and fire fighting work, including fire emergency lighting luminaire and fire emergency indicating luminaire.
3.2.1 Fire emergency lighting luminaire
Fire emergency luminaire which provides lighting for personnel evacuation and fire fighting work, thereinto, the luminous component is portable fire emergency lighting luminaire which is also known as flashlight for evacuation.
3.2.2 Fire emergency indicating luminaire
Fire emergency luminaire which completes the following function with figure and/or character:
a) Indicating emergency exit, storey, refuge storey (room);
b) Indicating evacuation direction;
c) Indicating position and direction of fire apparatus, fire hydrant box, fire elevator and disabled people stair;
d) Indicating out-of-bounds passage and location as well as hazardous article depository.
3.3 Fire emergency lighting & indicating luminaire
Fire emergency luminaire which has the function of fire emergency lighting luminaire and fire emergency indicating luminaire simultaneously.
3.4 Fire emergency luminaire powered by self contained battery
Fire emergency luminaire of which the battery, light source and associated circuits are assembled in the luminarie.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Protection Degree
6 Requirements
7 Test
8 Inspection Rules
9 Marking
10 Operation Instruction
Appendix A (Informative) Composition of Fire Emergency Lighting and Evacuate Indicating System
Appendix B (Normative) Evacuate Indicating Signs
Appendix C (Normative) Product Model
Appendix C (Normative) Product Model
Appendix D (Normative) Sealed Cadmium-nickel, Hydrogen-nickel Chargeable Battery
Appendix E (Normative) Valve-controlled Sealed Lead-acid Battery
Appendix F (Normative) Grinding Miller Diagram
1 Scope
This standard specifies terms and definitions, classification, protection degree, general requirements, test, inspection rules, marking and operation instruction of fire emergency lighting and evacuate indicating system.
This standard is applicable to fire emergency lighting and evacuate indicating system (hereinafter referred to as "system") installed and used in general industrial and civil buildings and to the system installed in other environment and with specific requirements (except unless otherwise specified by relevant standard).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB 4208-2008 "Degrees of Protection Provided by Enclosure (IP Code)" (IEC60529:2001, IDT)
GB 7000.1-2007 "Luminaires-Part 1: General Requirements and Tests" (IEC60598-1:2003, IDT)
GB/T 9969 "General Principles for Preparation of Instructions for Use of Industrial Products"
GB 12978 "Rules for Test of Fire Electronic Products"
GB 13495 "Fire Safety Signs" (GB13495-1992, neq ISO 6309:1987)
GB 16838 "Environmental Test Methods and Severities for Fire Electronic Products"
GB 50054 "Code for Design of Low Voltage Electrical Installations"
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 Fire emergency lighting and evacuate indicating system
System which provides lighting and evacuate indicating for personnel evacuation and fire fighting work and consists of various fire emergency luminaires and relevant devices.
3.2 Fire emergency luminaire
Various luminaires which provide lighting and marking for personnel evacuation and fire fighting work, including fire emergency lighting luminaire and fire emergency indicating luminaire.
3.2.1 Fire emergency lighting luminaire
Fire emergency luminaire which provides lighting for personnel evacuation and fire fighting work, thereinto, the luminous component is portable fire emergency lighting luminaire which is also known as flashlight for evacuation.
3.2.2 Fire emergency indicating luminaire
Fire emergency luminaire which completes the following function with figure and/or character:
a) Indicating emergency exit, storey, refuge storey (room);
b) Indicating evacuation direction;
c) Indicating position and direction of fire apparatus, fire hydrant box, fire elevator and disabled people stair;
d) Indicating out-of-bounds passage and location as well as hazardous article depository.
3.3 Fire emergency lighting & indicating luminaire
Fire emergency luminaire which has the function of fire emergency lighting luminaire and fire emergency indicating luminaire simultaneously.
3.4 Fire emergency luminaire powered by self contained battery
Fire emergency luminaire of which the battery, light source and associated circuits are assembled in the luminarie.
Contents of GB 17945-2010
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Protection Degree
6 Requirements
7 Test
8 Inspection Rules
9 Marking
10 Operation Instruction
Appendix A (Informative) Composition of Fire Emergency Lighting and Evacuate Indicating System
Appendix B (Normative) Evacuate Indicating Signs
Appendix C (Normative) Product Model
Appendix C (Normative) Product Model
Appendix D (Normative) Sealed Cadmium-nickel, Hydrogen-nickel Chargeable Battery
Appendix E (Normative) Valve-controlled Sealed Lead-acid Battery
Appendix F (Normative) Grinding Miller Diagram
