GB 29539-2025/XG1-2026 Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1 (English)
Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1
GB 29539-2025/XG1-2026 Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1
Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans
1 Scope
This document specifies the grades of energy efficiency. minimum allowable values, test methods and standard implementation for the household and similar range hoods, electric ventilating fans, and multifunctional appliances with ventilating function.
This document is applicable to:
a) Air-extraction range hoods installed on the upper part of household cooking stoves, stoves or similar appliances, with a rated voltage not more than 250 V;
b) Ventilating fans driven by electric motors, with single-phase rated voltage not more than 250 V, rated ventilating input power not more than 500 W, impeller diameter not more than 500 mm, as well as multifunctional appliances with ventilating function.
This document is not applicable to:
a) Cooking fume suction and extraction device of a downdraft system;
b) Commercial range hoods, and other commercial cooking fume extractors;
c) Ventilating fans designed exclusively for industrial purposes;
d) Ventilating fans intended for use under special conditions, such as where corrosive, flammable and explosive gases, dust, steam or gas are present;
e) Ventilating fans for refrigeration equipment or air conditioners and air-to-air energy recovery devices;
f) Ventilating fans embedded in appliances (such as stoves and microwave cooking appliances);
g) Marine ventilating fans;
h) Type C ventilating fans, two-way outlet ventilating fans, and Types B and D ventilating fans with a maximum static pressure of less than 25 Pa;
i) Ventilating fans with filter screens and a fresh air PM2.5 filtration efficiency greater than 90% tested according to GB/T 34012-2017.
Note: The definitions of types A, B, C, D ventilating fans and the like are quoted from GB/T 14806-2017.
2 Normative References
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 14806-2017 A.C. electric ventilating fans and regulators for household and similar purposes
GB/T 17713-2022 Range hoods, and other cooking fume extractors
GB/T 22769-2023 Electric bathroom heater (Yuba)
GB/T 34012-2017 Air cleaner for ventilation system
GB/T 35758-2017 Household electrical appliances - Measurement of standby power
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 14806-2017, GB/T 17713-2022, GB/T 22769-2023 and GB/T 35758-2017, as well as the following apply.
3.1
minimum allowable values of energy efficiency for range hoods
minimum allowable values of energy efficiency for range hoods under the specified test conditions
3.2
minimum allowable values of energy efficiency for ventilating fans
minimum allowable values of energy efficiency for ventilating fans under the test conditions specified in the standard
3.3
standby mode
continuous mode for any product, in which a range hood or ventilating fan provides one or more of the following user-oriented functions or protection functions when connected to the main power:
—— other modes (including main function on or off) may be triggered by triggering remote switches (including non-contract mode for the appliance), internal sensors and timers;
—— continuous function: information or status display including clock;
—— continuous function: sensor-based function.
[Source: GB/T 35758-2017, 3.6, modified]
3.4
off mode
continuous mode for any product, in which standby mode, network mode, or active mode are not available when the supply unit of a range hood or a ventilating fan is connected to the main power
Note: the indicator that prompts the user that the range hood or ventilating fan is in the off position is included in the category of off mode.
[Source: GB/T 35758-2017, 3.5, modified]
3.5
network mode
product mode, in which a range hood or ventilating fan is connected to the main power and at least one network function has been turned on (e.g. restarted by network command or complete network communication) but the main function has not been turned on
Note: Where a network function is not activated and/or not connected to a network, then this mode is not applicable. The network function can be triggered according to a preset instruction set or in response to a network requirement. A "network" in this context includes communication between two or more separate independently powered devices or products. The network does not contain one or more controls for a single product. The network mode may include one or more standby functions.
[Source: GB/T 35758-2017, 3.7]
3.6
active mode
product mode in which a range hood or ventilating fan is connected to the main power and at least one main function is activated
Note: The general terms "start-up", "in-use" and "normal operation" describe this mode.
[Source: GB/T 35758-2017, 3.8]
3.7
standby power
active power of a range hood or ventilating fan in standby mode
Note: It is expressed in watts (W).
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical requirements
5 Test method
6 Implementation of the standard
Annex A (Normative) Total pressure efficiency at working airflow
Annex B (Normative) Standby/off power test method
Annex C (Normative) Test method for heating energy consumption of bathroom heater
Annex D (Normative) Test method for energy efficiency of ventilating fans
Standard
GB 29539-2025/XG1-2026 Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1 (English)
Standard No.
GB 29539-2025/XG1-2026
Status
valid
Language
English
File Format
PDF
Word Count
11500 words
Translation Price(USD)
300.0
Implemented on
2026-5-25
Delivery
via email in 1 business day
Detail of GB 29539-2025/XG1-2026
Standard No.
GB 29539-2025/XG1-2026
English Name
Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1
GB 29539-2025/XG1-2026 Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans, includes Amendment 1
Minimum allowable values of energy efficiency and energy efficiency grades for household and similar range hoods and ventilating fans
1 Scope
This document specifies the grades of energy efficiency. minimum allowable values, test methods and standard implementation for the household and similar range hoods, electric ventilating fans, and multifunctional appliances with ventilating function.
This document is applicable to:
a) Air-extraction range hoods installed on the upper part of household cooking stoves, stoves or similar appliances, with a rated voltage not more than 250 V;
b) Ventilating fans driven by electric motors, with single-phase rated voltage not more than 250 V, rated ventilating input power not more than 500 W, impeller diameter not more than 500 mm, as well as multifunctional appliances with ventilating function.
This document is not applicable to:
a) Cooking fume suction and extraction device of a downdraft system;
b) Commercial range hoods, and other commercial cooking fume extractors;
c) Ventilating fans designed exclusively for industrial purposes;
d) Ventilating fans intended for use under special conditions, such as where corrosive, flammable and explosive gases, dust, steam or gas are present;
e) Ventilating fans for refrigeration equipment or air conditioners and air-to-air energy recovery devices;
f) Ventilating fans embedded in appliances (such as stoves and microwave cooking appliances);
g) Marine ventilating fans;
h) Type C ventilating fans, two-way outlet ventilating fans, and Types B and D ventilating fans with a maximum static pressure of less than 25 Pa;
i) Ventilating fans with filter screens and a fresh air PM2.5 filtration efficiency greater than 90% tested according to GB/T 34012-2017.
Note: The definitions of types A, B, C, D ventilating fans and the like are quoted from GB/T 14806-2017.
2 Normative References
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 14806-2017 A.C. electric ventilating fans and regulators for household and similar purposes
GB/T 17713-2022 Range hoods, and other cooking fume extractors
GB/T 22769-2023 Electric bathroom heater (Yuba)
GB/T 34012-2017 Air cleaner for ventilation system
GB/T 35758-2017 Household electrical appliances - Measurement of standby power
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 14806-2017, GB/T 17713-2022, GB/T 22769-2023 and GB/T 35758-2017, as well as the following apply.
3.1
minimum allowable values of energy efficiency for range hoods
minimum allowable values of energy efficiency for range hoods under the specified test conditions
3.2
minimum allowable values of energy efficiency for ventilating fans
minimum allowable values of energy efficiency for ventilating fans under the test conditions specified in the standard
3.3
standby mode
continuous mode for any product, in which a range hood or ventilating fan provides one or more of the following user-oriented functions or protection functions when connected to the main power:
—— other modes (including main function on or off) may be triggered by triggering remote switches (including non-contract mode for the appliance), internal sensors and timers;
—— continuous function: information or status display including clock;
—— continuous function: sensor-based function.
[Source: GB/T 35758-2017, 3.6, modified]
3.4
off mode
continuous mode for any product, in which standby mode, network mode, or active mode are not available when the supply unit of a range hood or a ventilating fan is connected to the main power
Note: the indicator that prompts the user that the range hood or ventilating fan is in the off position is included in the category of off mode.
[Source: GB/T 35758-2017, 3.5, modified]
3.5
network mode
product mode, in which a range hood or ventilating fan is connected to the main power and at least one network function has been turned on (e.g. restarted by network command or complete network communication) but the main function has not been turned on
Note: Where a network function is not activated and/or not connected to a network, then this mode is not applicable. The network function can be triggered according to a preset instruction set or in response to a network requirement. A "network" in this context includes communication between two or more separate independently powered devices or products. The network does not contain one or more controls for a single product. The network mode may include one or more standby functions.
[Source: GB/T 35758-2017, 3.7]
3.6
active mode
product mode in which a range hood or ventilating fan is connected to the main power and at least one main function is activated
Note: The general terms "start-up", "in-use" and "normal operation" describe this mode.
[Source: GB/T 35758-2017, 3.8]
3.7
standby power
active power of a range hood or ventilating fan in standby mode
Note: It is expressed in watts (W).
Contents of GB 29539-2025/XG1-2026
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical requirements
5 Test method
6 Implementation of the standard
Annex A (Normative) Total pressure efficiency at working airflow
Annex B (Normative) Standby/off power test method
Annex C (Normative) Test method for heating energy consumption of bathroom heater
Annex D (Normative) Test method for energy efficiency of ventilating fans
