2023-3-23 3.239.117.1
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB/T 10095.2-2008
GB/T 10095.2-2008   Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information (English Version)
Standard No.: GB/T 10095.2-2008 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 9000 words Price(USD):140.0 remind me the price change

Email:

Implemented on:2008-9-1 Delivery: via email in 1 business day
,,
Standard No.: GB/T 10095.2-2008
English Name: Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
Chinese Name: 圆柱齿轮 精度制 第2部分:径向综合偏差与径向跳动的定义和允许值
Chinese Classification: J17    Gear and gear drive
Professional Classification: GB    National Standard
Issued by: AQSIQ, SAC
Issued on: 2008-03-31
Implemented on: 2008-9-1
Status: valid
Superseding:GB/T 10095.2-2001 Cylindrical gears--System of accuracy--Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information
Language: English
File Format: PDF
Word Count: 9000 words
Price(USD): 140.0
Delivery: via email in 1 business day
1 Scope This part establishes a system of accuracy relevant to radial composite deviations of individual cylindrical involute gears. It specifies the appropriate definitions of gear tooth accuracy terms, the structure of the gear accuracy system and the allowable values of the above mentioned deviations. The radial measurement accuracy system has different grade ranges than elemental ranges in GB/T 10095.1. The diameter and module ranges for radial composite deviations and runout are also different. a) The radial composite accuracy system comprises 9 accuracy grades for Fi″ or fi″ of which grade 4 is the highest and grade 12 is the lowest. The module range extends from 0.2mm to 10mm and the diameter range from 5.0mm to 1,000mm, see Clauses 6 and 7. Annex A (informative) gives tables based on the equations in Clause 7. b) Runout is defined in Annex B (informative) and values are not given in the standard for determining accuracy grade 5. Annex B provides information on runout for use if agreed upon between purchaser and manufacturer. 2 Normative references The following normative documents contain provisions which, through reference in this part of GB/T 10095, constitute provisions of this part. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 10095.1-2008 Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth (ISO 1328-1:1995, IDT) GB/T 2821-2003 International gear notation - Symbols for geometrical data (ISO 701:1998, IDT) GB/T 3374 Basic terminology of gears (GB/T 3374-1992, neq ISO/R 1122-1:1983) GB/Z 18620.2-2008 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash (ISO/TR 10064-2:1996, IDT) 3 Terms and definitions For the purposes of this part, the terms and definitions given in GB/T 3374 apply.
ISO foreword i ISO introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Symbols, quantities and units 5 Gear tooth accuracy terms and definitions relevant to radial composite deviations 6 Structure of the gear accuracy system 7 Equations for grade 5 accuracy tolerances for radial composite deviations Annex A (informative) Tables of allowable values of radial composite deviations Annex B (informative) Allowable values of runout with tolerance tables Bibliography
Referred in GB/T 10095.2-2008:
*GB/T 10095.1-2008 Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
*GB/T 2821-2003 Gear—Symbols for geometrical data
*GB/T 3374-1992 Basic terminology of gears
*GB/Z 18620.2-2008 Cylindrical gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations runout tooth thickness and backlash
GB/T 10095.2-2008 is referred in:
* GB/T 10599-2010 Multi-rope Mining Friction Hoist
* GB/T 20961-2007 Single-rope mine drum hoist
* GB/T 29717-2013 Rolling bearings—Wind power generators yaw and pitch bearings
* HG/T 3132-2007 L type cooling tower fan
* JB/T 8941.1-2014 Roots type blowers for general purpose. Part 1:Specification
* TB/T 3134-2013 Driving gearbox used on EMU
*JB/T 12474.10-2015 Coke oven machine-Part 10:Stamping machine
*JB/T 7016-2017 Storage/retrieval machine
*GB/T 20041.21-2017 Conduit systems for cable management- Part 21:Particular requirement for rigid conduit systems
*JB/T 10731-2017 Limestone wet ball mill for desulphurization
*GB/T 10095.1-2008 Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
*CB/T 3669-2013 Slewing bearing of crane for ship
*JB/T 2300-2018 Slewing bearings
*JB/T 8415-2011 Internal combustion engines — Timing gears — Specifications
Code of China
Standard
GB/T 10095.2-2008  Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information (English Version)
Standard No.GB/T 10095.2-2008
Statusvalid
LanguageEnglish
File FormatPDF
Word Count9000 words
Price(USD)140.0
Implemented on2008-9-1
Deliveryvia email in 1 business day
Detail of GB/T 10095.2-2008
Standard No.
GB/T 10095.2-2008
English Name
Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
Chinese Name
圆柱齿轮 精度制 第2部分:径向综合偏差与径向跳动的定义和允许值
Chinese Classification
J17
Professional Classification
GB
ICS Classification
Issued by
AQSIQ, SAC
Issued on
2008-03-31
Implemented on
2008-9-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
GB/T 10095.2-2001 Cylindrical gears--System of accuracy--Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information
Language
English
File Format
PDF
Word Count
9000 words
Price(USD)
140.0
Keywords
GB/T 10095.2-2008, GB 10095.2-2008, GBT 10095.2-2008, GB/T10095.2-2008, GB/T 10095.2, GB/T10095.2, GB10095.2-2008, GB 10095.2, GB10095.2, GBT10095.2-2008, GBT 10095.2, GBT10095.2
Introduction of GB/T 10095.2-2008
1 Scope This part establishes a system of accuracy relevant to radial composite deviations of individual cylindrical involute gears. It specifies the appropriate definitions of gear tooth accuracy terms, the structure of the gear accuracy system and the allowable values of the above mentioned deviations. The radial measurement accuracy system has different grade ranges than elemental ranges in GB/T 10095.1. The diameter and module ranges for radial composite deviations and runout are also different. a) The radial composite accuracy system comprises 9 accuracy grades for Fi″ or fi″ of which grade 4 is the highest and grade 12 is the lowest. The module range extends from 0.2mm to 10mm and the diameter range from 5.0mm to 1,000mm, see Clauses 6 and 7. Annex A (informative) gives tables based on the equations in Clause 7. b) Runout is defined in Annex B (informative) and values are not given in the standard for determining accuracy grade 5. Annex B provides information on runout for use if agreed upon between purchaser and manufacturer. 2 Normative references The following normative documents contain provisions which, through reference in this part of GB/T 10095, constitute provisions of this part. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies. GB/T 10095.1-2008 Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth (ISO 1328-1:1995, IDT) GB/T 2821-2003 International gear notation - Symbols for geometrical data (ISO 701:1998, IDT) GB/T 3374 Basic terminology of gears (GB/T 3374-1992, neq ISO/R 1122-1:1983) GB/Z 18620.2-2008 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash (ISO/TR 10064-2:1996, IDT) 3 Terms and definitions For the purposes of this part, the terms and definitions given in GB/T 3374 apply.
Contents of GB/T 10095.2-2008
ISO foreword i ISO introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Symbols, quantities and units 5 Gear tooth accuracy terms and definitions relevant to radial composite deviations 6 Structure of the gear accuracy system 7 Equations for grade 5 accuracy tolerances for radial composite deviations Annex A (informative) Tables of allowable values of radial composite deviations Annex B (informative) Allowable values of runout with tolerance tables Bibliography
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040
 
 
Keywords:
GB/T 10095.2-2008, GB 10095.2-2008, GBT 10095.2-2008, GB/T10095.2-2008, GB/T 10095.2, GB/T10095.2, GB10095.2-2008, GB 10095.2, GB10095.2, GBT10095.2-2008, GBT 10095.2, GBT10095.2