GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials—Part 1:Criteria for the selection of the appropriate level of quality requirements (English Version)
1 Scope
This part of GB/12467 provides the criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials.
This part is applicable to the welding manufacture in workshops and on site.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 19000 Quality management systems - Fundamentals and vocabulary (GB/T 19000-2008, ISO 9000:2000, IDT)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 19000 and the following apply.
3.1 Design specification
Requirements for products specified by customers (or by the organization in anticipation of customer requirements, or by regulation). The design specification may include the associated requirements, for example, technical specifications, product standards, process standards, contractual agreements and regulatory requirements.
NOTE The requirements for products and in some cases associated processes can be contained in, for example, technical specifications, product standards, process standards, contractual agreements and regulatory requirements.
3.2 Qualified person
Person whose competence and knowledge have been obtained by education, training and/or relevant practical experience
NOTE In order to demonstrate the level of competence and knowledge, a qualification test may be required.
3.3 Construction
Product, structure or any other welded item
3.4 Manufacturer fabricator
Person or organization responsible for the welding production
3.5 Sub-contractor
Supplier of products, services and/or activities to the manufacturer in a contractual situation
3.6 Welding operator
Person who performs fully mechanised or automatic fusion welding processes
4 General Outline of GB/T 12467
GB/T 12467 specifies quality requirements suitable for fusion welding processes of metallic materials. The requirements contained within this part may be adopted for other welding processes. These requirements relate only to those aspects of the quality of the products, which may be influenced by fusion welding, without being assigned to any specific product group.
GB/T 12467 therefore provides a method to demonstrate the capability of a manufacturer to produce products of the specified quality.
It was prepared such that:
a) It is independent of the type of construction manufactured;
b) It defines quality requirements for welding in workshops and/or on site;
c) It provides guidance for describing a manufacturer's capability to produce constructions to meet specified requirements;
d) It provides a basis for assessing a manufacturer's welding capability.
GB/T 12467 is appropriate when demonstration of a manufacturer's capability to produce welded constructions, fulfilling specified quality requirements, is specified in one or more of the following:
¯a specification;
¯a product standard;
¯a regulatory requirement.
The requirements contained within this document may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of welding in the following applications.
¯Case 1: To provide specific requirements in specifications which require the manufacturer to have a quality management system in accordance with GB/T 19001;
¯Case 2: To provide specific requirements in specifications which require the manufacturer to have a quality management system other than GB/T 19001;
¯Case 3: To provide specific guidance for a manufacturer developing a quality management system for fusion welding.
¯Case 4: To provide detailed requirements for specifications, regulations or product standards that require control of fusion welding activities.
GB/T 12467.1-2009 Quality requirements for fusion welding of metallic materials—Part 1:Criteria for the selection of the appropriate level of quality requirements (English Version)
Standard No.
GB/T 12467.1-2009
Status
valid
Language
English
File Format
PDF
Word Count
2000 words
Price(USD)
40.0
Implemented on
2010-4-1
Delivery
via email in 1 business day
Detail of GB/T 12467.1-2009
Standard No.
GB/T 12467.1-2009
English Name
Quality requirements for fusion welding of metallic materials—Part 1:Criteria for the selection of the appropriate level of quality requirements
1 Scope
This part of GB/12467 provides the criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials.
This part is applicable to the welding manufacture in workshops and on site.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 19000 Quality management systems - Fundamentals and vocabulary (GB/T 19000-2008, ISO 9000:2000, IDT)
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 19000 and the following apply.
3.1 Design specification
Requirements for products specified by customers (or by the organization in anticipation of customer requirements, or by regulation). The design specification may include the associated requirements, for example, technical specifications, product standards, process standards, contractual agreements and regulatory requirements.
NOTE The requirements for products and in some cases associated processes can be contained in, for example, technical specifications, product standards, process standards, contractual agreements and regulatory requirements.
3.2 Qualified person
Person whose competence and knowledge have been obtained by education, training and/or relevant practical experience
NOTE In order to demonstrate the level of competence and knowledge, a qualification test may be required.
3.3 Construction
Product, structure or any other welded item
3.4 Manufacturer fabricator
Person or organization responsible for the welding production
3.5 Sub-contractor
Supplier of products, services and/or activities to the manufacturer in a contractual situation
3.6 Welding operator
Person who performs fully mechanised or automatic fusion welding processes
4 General Outline of GB/T 12467
GB/T 12467 specifies quality requirements suitable for fusion welding processes of metallic materials. The requirements contained within this part may be adopted for other welding processes. These requirements relate only to those aspects of the quality of the products, which may be influenced by fusion welding, without being assigned to any specific product group.
GB/T 12467 therefore provides a method to demonstrate the capability of a manufacturer to produce products of the specified quality.
It was prepared such that:
a) It is independent of the type of construction manufactured;
b) It defines quality requirements for welding in workshops and/or on site;
c) It provides guidance for describing a manufacturer's capability to produce constructions to meet specified requirements;
d) It provides a basis for assessing a manufacturer's welding capability.
GB/T 12467 is appropriate when demonstration of a manufacturer's capability to produce welded constructions, fulfilling specified quality requirements, is specified in one or more of the following:
¯a specification;
¯a product standard;
¯a regulatory requirement.
The requirements contained within this document may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of welding in the following applications.
¯Case 1: To provide specific requirements in specifications which require the manufacturer to have a quality management system in accordance with GB/T 19001;
¯Case 2: To provide specific requirements in specifications which require the manufacturer to have a quality management system other than GB/T 19001;
¯Case 3: To provide specific guidance for a manufacturer developing a quality management system for fusion welding.
¯Case 4: To provide detailed requirements for specifications, regulations or product standards that require control of fusion welding activities.
