1 Scope
This standard specifies the classification, designation expression and code, dimension, appearance, weight and permissible deviation, technical requirements, test methods, inspection rules, as well as packaging, marking and quality certificate of continuously hot rolled wide strips and their shear plates for line pipe of petroleum and natural gas (hereinafter referred to as “strips and plates”).
This standard is applicable to strips for line pipe of petroleum and natural gas produced according to ISO 3183, GB/T 9711 and API Spec 5L, as well as the strips for welded pipe of other fluid produced according to similar requirements.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.26 Iron Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method
GB/T 223.40 Iron Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content
GB/T 223.54 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite-sodium Nitrite Titrimetric Method for the Determination of Manganese Content
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace
GB/T 223.76 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrometric Method for the Determination of Vanadium Content
GB/T 223.78 Methods for Chemical Analysis of Iron, Steel and Alloy - Curcumin Spectrophotometric Method for the Determination of Boron Content
GB/T 228.1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method
GB/T 232 Metallic Materials-Bend Test
GB/T 247 General Rule of Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 709 Dimension, Shape, Weight and Tolerances for Hot-rolled Steel Plates and Sheets
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method
GB/T 6394 Metal - Methods for Estimating the Average Grain Size
GB/T 8363 Test Method for Drop-weight Tear Tests of Steel Products
GB/T 9711 Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems
GB/T 13299 Steel - Determination of Microstructure
GB/T 14977 General Requirement for Surface Condition of Hot-rolled Steel Plates
GB/T 17505 Steel and Steel Products - General Technical Delivery Requirements
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method)
GB/T 20125 Low-alloy Steel - Determination of Multi-element Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method
YB/T 081 Rule for Rounding Off of Numerical Values and Judgment of Testing Values for Technical Standards of Metallurgy
ISO 3183 Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems
ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
API Spec 5L Specification for Line Pipe
3 Classification, Designation Expression and Code
3.1 Classification
This standard classifies the strips into two categories based on the quality grade: PSL1 and PSL2.
Foreword i
1 Scope
2 Normative References
3 Classification, Designation Expression and Code
4 Order Content
5 Dimension, Appearance, Weight and Permissible Deviation
6 Technical Requirements
7 Test and Inspection Methods
8 Inspection Rules
9 Packing, Marking and Quality Certificate
10 Value Rounding
Appendix A (Informative) Comparison of Designations in This Standard with Those in Other Relevant Domestic and Foreign Standards
1 Scope
This standard specifies the classification, designation expression and code, dimension, appearance, weight and permissible deviation, technical requirements, test methods, inspection rules, as well as packaging, marking and quality certificate of continuously hot rolled wide strips and their shear plates for line pipe of petroleum and natural gas (hereinafter referred to as “strips and plates”).
This standard is applicable to strips for line pipe of petroleum and natural gas produced according to ISO 3183, GB/T 9711 and API Spec 5L, as well as the strips for welded pipe of other fluid produced according to similar requirements.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.17 Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyrylmethane Photometric Method for the Determination of Titanium Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.26 Iron Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method
GB/T 223.40 Iron Steel and Alloy - Determination of Niobium Content by the Sulphochlorophenol S Spectrophotometric Method
GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content
GB/T 223.54 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.58 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Arsenite-sodium Nitrite Titrimetric Method for the Determination of Manganese Content
GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method
GB/T 223.63 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium (Potassium) Periodate Photometric Method for the Determination of Manganese Content
GB/T 223.68 Methods for Chemical Analysis of Iron, Steel and Alloy - The Potassium Iodate Titration Method after Combustion in the Pipe Furnace for the Determination of Sulfur Content
GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace
GB/T 223.76 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrometric Method for the Determination of Vanadium Content
GB/T 223.78 Methods for Chemical Analysis of Iron, Steel and Alloy - Curcumin Spectrophotometric Method for the Determination of Boron Content
GB/T 228.1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method
GB/T 232 Metallic Materials-Bend Test
GB/T 247 General Rule of Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 709 Dimension, Shape, Weight and Tolerances for Hot-rolled Steel Plates and Sheets
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for Mechanical Testing
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method
GB/T 6394 Metal - Methods for Estimating the Average Grain Size
GB/T 8363 Test Method for Drop-weight Tear Tests of Steel Products
GB/T 9711 Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems
GB/T 13299 Steel - Determination of Microstructure
GB/T 14977 General Requirement for Surface Condition of Hot-rolled Steel Plates
GB/T 17505 Steel and Steel Products - General Technical Delivery Requirements
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the Determination of Chemical Composition
GB/T 20123 Steel and Iron - Determination of Total Carbon and Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace (Routine Method)
GB/T 20125 Low-alloy Steel - Determination of Multi-element Contents - Inductively Coupled Plasma Atomic Emission Spectrometric Method
YB/T 081 Rule for Rounding Off of Numerical Values and Judgment of Testing Values for Technical Standards of Metallurgy
ISO 3183 Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems
ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
API Spec 5L Specification for Line Pipe
3 Classification, Designation Expression and Code
3.1 Classification
This standard classifies the strips into two categories based on the quality grade: PSL1 and PSL2.
Contents of GB/T 14164-2013
Foreword i
1 Scope
2 Normative References
3 Classification, Designation Expression and Code
4 Order Content
5 Dimension, Appearance, Weight and Permissible Deviation
6 Technical Requirements
7 Test and Inspection Methods
8 Inspection Rules
9 Packing, Marking and Quality Certificate
10 Value Rounding
Appendix A (Informative) Comparison of Designations in This Standard with Those in Other Relevant Domestic and Foreign Standards
