Inspection rules for rolling bearings and commercial parts
1 Scope
This document specifies the inspection rules for universal rolling bearings and commercial parts (steel balls, ceramic balls, tapered rollers, cylindrical rollers, spherical rollers, roller pins), as well as bearing accessories.
This document is applicable to the inspection, reception, and supervision and inspection of rolling bearings and commercial parts, as well as bearing accessories by the following organizations or institutions:
a) The quality department of the supplier organization (first-party);
b) The purchaser or purchasing organization (second-party);
c) Inspection and testing institutions (third-party).
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 307.1-2017 Rolling bearings - Radial bearings - Geometrical product specification (GPS) and tolerance values
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4199 Rolling bearings - Tolerances - Definitions
GB/T 6930 Rolling bearings - Vocabulary
GB/T 7811-2015 Rolling bearings - Symbols for physical quantities
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T4199, GB/T 6930 and GB/T2828.1-2012 and the following apply.
3.1
supervision and inspection
means by which government departments control product quality through sampling inspections
3.2
conformity assessment
confirmation that the specified requirements related to products, processes, systems, personnel or institutions have been met
[Source: GB/T 27000-2023, 3.1, modified]
4 Symbols and abbreviations
For the purposes of this document, the symbols and abbreviations given in GB/T307.1-2017 and GB/T 7811-2015 and the following apply.
5 Inspection items
6 Sampling inspection determination method
7 Supervision and inspection
Bibliography
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Inspection items
6 Sampling inspection determination method
7 Supervision and inspection
Bibliography
Inspection rules for rolling bearings and commercial parts
1 Scope
This document specifies the inspection rules for universal rolling bearings and commercial parts (steel balls, ceramic balls, tapered rollers, cylindrical rollers, spherical rollers, roller pins), as well as bearing accessories.
This document is applicable to the inspection, reception, and supervision and inspection of rolling bearings and commercial parts, as well as bearing accessories by the following organizations or institutions:
a) The quality department of the supplier organization (first-party);
b) The purchaser or purchasing organization (second-party);
c) Inspection and testing institutions (third-party).
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 307.1-2017 Rolling bearings - Radial bearings - Geometrical product specification (GPS) and tolerance values
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4199 Rolling bearings - Tolerances - Definitions
GB/T 6930 Rolling bearings - Vocabulary
GB/T 7811-2015 Rolling bearings - Symbols for physical quantities
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T4199, GB/T 6930 and GB/T2828.1-2012 and the following apply.
3.1
supervision and inspection
means by which government departments control product quality through sampling inspections
3.2
conformity assessment
confirmation that the specified requirements related to products, processes, systems, personnel or institutions have been met
[Source: GB/T 27000-2023, 3.1, modified]
4 Symbols and abbreviations
For the purposes of this document, the symbols and abbreviations given in GB/T307.1-2017 and GB/T 7811-2015 and the following apply.
5 Inspection items
6 Sampling inspection determination method
7 Supervision and inspection
Bibliography
Contents of GB/T 24608-2023
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Inspection items
6 Sampling inspection determination method
7 Supervision and inspection
Bibliography
