Foreword
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by China Iron and Steel Association.
This document is under the jurisdiction of National Technical Committee on Iron and Steel of Standardization Administration of China (SAC/TC 183).
Seamless steel tubes for hydroformed part
1 Scope
This standard specifies the order contents, dimension, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certification of seamless steel tubes for hydroformed part.
This document is applicable to the seamless steel tubes used in the manufacture of hydroformed parts (hereinafter referred to as “steel tubes”). The welded steel tubes for hydroformed parts may refer to this document.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method
GB/T 223.9 Iron,steel and alloy - Determination of aluminum content - Chrome azurol S photometric method
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation - diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.14 Methods for chemical analysis of iron,steel and alloy - The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.19 Methods for chemical analysis of iron,steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content
GB/T 223.84 Steel, iron and alloy - Determination of titanium content - Diantipyrylmethane spectrophotometric method
GB/T 223.85 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
GB/T 223.86 Steel, iron and alloy - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 2102 Acceptance, packing, marking and quality certification of steel pipe
GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method)
GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
GB/T 6394 Determination of estimating the average grain size of metal
GB/T 7735-2016 Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections
GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel - Micrographic method using standard diagrams
GB/T 17395 Dimensions, shapes, masses and tolerances of seamless steel tubes
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20125 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method
GB/T 30062 Terminology of steel pipes and tubes
GB/T 38719 Metallic materials - Tube - Determination of biaxial stress-strain curve of tube by hydro-bulging test
YB/T 4149 Continuously cast round billet for seamless steel tube rolling
YB/T 5221 Alloy structure steel round tube blank hot rolled and forged for making seamless tube
YB/T 5222 Quality hot rolled and forged carbon structural steel round tube blank
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 30062 apply.
4 Steel grade expression
The steel grades consist of the abbreviation "HF" for "hydroforming” and the specified minimum lower yield strength value (specified plastic elongation strength value, expressed in MPa).
Example: HF340, where,
HF——the abbreviation for "hydroforming”;
340——the specified minimum lower yield strength value (specified plastic elongation strength value), MPa.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Steel grade expression
5 Order contents
6 Dimension, shape, weight and allowable deviation
7 Technical requirements
8 Test methods
9 Inspection rules
10 Packaging, marking and quality certification
Foreword
This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by China Iron and Steel Association.
This document is under the jurisdiction of National Technical Committee on Iron and Steel of Standardization Administration of China (SAC/TC 183).
Seamless steel tubes for hydroformed part
1 Scope
This standard specifies the order contents, dimension, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certification of seamless steel tubes for hydroformed part.
This document is applicable to the seamless steel tubes used in the manufacture of hydroformed parts (hereinafter referred to as “steel tubes”). The welded steel tubes for hydroformed parts may refer to this document.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method
GB/T 223.9 Iron,steel and alloy - Determination of aluminum content - Chrome azurol S photometric method
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - The sodium carbonate separation - diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.14 Methods for chemical analysis of iron,steel and alloy - The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.19 Methods for chemical analysis of iron,steel and alloy - The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content
GB/T 223.84 Steel, iron and alloy - Determination of titanium content - Diantipyrylmethane spectrophotometric method
GB/T 223.85 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
GB/T 223.86 Steel, iron and alloy - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 2102 Acceptance, packing, marking and quality certification of steel pipe
GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method)
GB/T 5777-2019 Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
GB/T 6394 Determination of estimating the average grain size of metal
GB/T 7735-2016 Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections
GB/T 10561-2023 Determination of content of nonmetallic inclusions in steel - Micrographic method using standard diagrams
GB/T 17395 Dimensions, shapes, masses and tolerances of seamless steel tubes
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20125 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method
GB/T 30062 Terminology of steel pipes and tubes
GB/T 38719 Metallic materials - Tube - Determination of biaxial stress-strain curve of tube by hydro-bulging test
YB/T 4149 Continuously cast round billet for seamless steel tube rolling
YB/T 5221 Alloy structure steel round tube blank hot rolled and forged for making seamless tube
YB/T 5222 Quality hot rolled and forged carbon structural steel round tube blank
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 30062 apply.
4 Steel grade expression
The steel grades consist of the abbreviation "HF" for "hydroforming” and the specified minimum lower yield strength value (specified plastic elongation strength value, expressed in MPa).
Example: HF340, where,
HF——the abbreviation for "hydroforming”;
340——the specified minimum lower yield strength value (specified plastic elongation strength value), MPa.
Contents of GB/T 43105-2023
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Steel grade expression
5 Order contents
6 Dimension, shape, weight and allowable deviation
7 Technical requirements
8 Test methods
9 Inspection rules
10 Packaging, marking and quality certification
