Standard No.:	GB/T 50561-2010
English Name:	Code for equipment installing and acceptance of building material industry
Chinese Name:	建材工业设备安装工程施工及验收规范
Professional Classification:	GB    National Standard
Source Content Issued by:	MOC
Issued on:	2010-5-31
Implemented on:	2010-12-1
Status:	superseded
Superseded by:	GB/T 50561-2019 Standard for equipment installing and acceptance of building material industry
Superseded on:	2020-4-1
Target Language:	English
File Format:	PDF
Word Count:	50000 words
Translation Price(USD):	1000.0
Delivery:	via email in 1 business day

1.0.1 This code is formulated with a view to guiding the equipment installing and acceptance of Chinese building material industry, ensuring the quality and safety of equipment installation, promoting the technological progress and standardization process, as well as improving economic benefits. 1.0.2 This code is applicable to the equipment installing and acceptance of predecomposition production line in cement industry, float glass production line and building sanitary ceramics production line from foundation acceptance to equipment no-load test run in newly-built, reconstructed and expanded projects. 1.0.3 The installing and acceptance of continuous conveying equipment, fan and pump equipment as well as crane in cement plant, flat glass plant and building sanitary ceramics plant which are not involved in this code, shall be in accordance with the relevant requirements of the current national standards "Code for Construction and Acceptance of Continuous Conveyer Equipment Installation Engineering" (GB 50270), "Code for Construction and Acceptance of Computer, Fan and Pump Installation Engineering" (GB 50275) and "Code for Construction and Acceptance of Crane Installation Engineering" (GB 50278) respectively. The installing and acceptance of other equipment not involved shall be in accordance with the relevant requirements of the current national standard "General Code for Construction and Acceptance of Mechanical Equipment Installation Engineering" (GB 50231).The installing and acceptance of mechanical equipment with specific requirements and beyond this code shall be in accordance with the relevant requirements of random documents. 1.0.4 The installing and acceptance of electric system and control system for equipment shall be in accordance with the relevant requirements of the current professional standard "Specification for Construction Quality Checkout and Evaluation of Electric equipment" (DL/T 5161.1-17). If there is any special requirement, the installing and acceptance shall be in accordance with the relevant requirements of the random documents of equipment. 1.0.5 The refractory material for building relevant kilns in cement plant, flat glass plant and building sanitary ceramics plant shall not only meet the special requirements in the text of this code, but also comply with the requirements of the current national standard "Code for Construction and Acceptance of Industrial Furnaces Building" (GB 50211). The refractory material with special requirements and new designations shall meet the requirements of product specification. 1.0.6 The installing shall not only meet the requirements of this code, but also comply with the relevant national requirements of safety technology, labor protection, fire prevention and cleaner production. The power utilization of mechanical equipment under installation shall meet the current safety standards and codes for power supply and utilization at construction site. 1.0.7 The wastes generated during installation shall be stored and disposed collectively. The toxic or potential toxic wastes shall be treated according to the requirements of the current national standard "Standard for Pollution Control on Hazardous Waste Storage" (GB 18597), and the treatment processes and results shall be reported to the relevant national administrative departments in written form. 1.0.8 This code specifies the basic technical requirements for the equipment installing and acceptance of building material industry. If this code conflicts with the requirements of the national laws and administrative regulations, the national laws and administrative regulations shall apply. 1.0.9 The equipment installing and acceptance of building material industry shall not only meet the requirements of this code, but also comply with those specified in the current relevant national standards.

1 General Provisions 2 Terms 3 Basic Requirement for Equipment Installation 3.1 General Requirement 3.2 Equipment Checking and Handover 3.3 Moving and Lifting of Equipment 3.4 Equipment Foundation Acceptance and Scribing 3.5 Equipment Location, Anchor Bolt Pouring and Secondary Pouring 3.6 Dismantling, Cleaning and Assembling of Equipment Parts 3.7 Basic Assembly Requirements 3.8 Single-Machine No-Load Test Run of Equipment 4 Installation of General Equipment 4.1 Continuous Conveyor Equipment 4.2 Dust Collection Equipment 4.3 Hammer Crusher 4.4 Impact Crusher 4.5 Jaw Crusher 4.6 Large Scale Jaw crusher 4.7 Cone Crusher 4.8 Roll Crusher 5 Cement Equipment Installation 5.1 Cylindrical rotary furnace 5.2 Dryer 5.3 Grate Cooler 5.4 Chain Bucket Conveyor 5.5 Preheater, Humidifying Tower, Recoup Duct 5.6 Powdered Coal Combustion Device 5.7 Tube Mill Device 5.8 Vertical roller mill 5.9 Rolling machine 5.10 Powder concentrator, powder separator, air separator 5.11 Centre drive reductor of split-type mill 5.12 Stacker and Reclaimer 5.13 Aeration Tank and Air Conveying Chute 5.14 Feeding And Measuring Equipment Installation 5.15 Air Lift Mud Pump, Single Or Double Bin Pump 6 Glass Euipment Installation 6.1 Sand-drawing Machine 6.2 Electronic Scale System 6.3 Mixer 6.4 Glass Furnace 6.5 Molten Glass Horizontal Stirrer 6.6 Flue Damper 6.7 Exchanger 6.8 Tin Bath 6.9 Canal Damper 6.10 Suspended Top Roller and Cooler 6.11 Sealing Box and Lift-out Roller 6.12 Annealing Lehr 6.13 Cold End Cutting and Packing Units 6.14 Utility Equipment 7 Ceramics Equipment Installation 7.1 Feeder 7.2 Intermittent Ball Mill 7.3 Continuous Ball Mill 7.4 Slurry Agitator 7.5 Spray Dryer 7.6 Automatic Hydraulic Tile Press 7.7 Sanitary Porcelain Combination Pouring Equipment 7.8 Roller Dryer and Multi-layer Dryer 7.9 Sanitary Porcelain Less Air Dryer 7.10 Glazing Line, Brick in and out Roller Table 7.11 Sanitary Porcelain Glazing Cabinet 7.12 Decorating Machine 7.13 Furnace Kiln 7.14 Ceramic Tile Polishing Device 8 Acceptance of Installation Engineering Appendix A Manufacturing Method of Sand Pile Shim Plate Appendix B Specification of Wedge and Flat Shim Plate Appendix C Reference Data of Equipment Vibration Control Explanation of Wording in This Code List of Quoted Standards