2025-6-23 18.97.14.83
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/QC/T 1156-2021
QC/T 1156-2021   Recycling of traction battery used in electric vehicle - Specification for secondary cell disassembly (Draft for approval) (English Version)
Standard No.: QC/T 1156-2021 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 5500 words Price(USD):180.0 remind me the price change

Email:

Implemented on:2022-2-1 Delivery: via email in 1 business day
,,
Standard No.: QC/T 1156-2021
English Name: Recycling of traction battery used in electric vehicle - Specification for secondary cell disassembly (Draft for approval)
Chinese Name: 车用动力电池回收利用 单体拆解技术规范 (报批稿)
Professional Classification: QC    Professional Standard - Automobile
Issued on: 2021-08-21
Implemented on: 2022-2-1
Status: valid
Language: English
File Format: PDF
Word Count: 5500 words
Price(USD): 180.0
Delivery: via email in 1 business day
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents. This document was proposed and is under the jurisdiction of the National Technical Committee of Auto Standardization (SAC/TC 114). This document is issued for the first time. Recycling of traction battery used in electric vehicle— Specifications for secondary cell disassembly 1 Scope This document specifies the terms and definitions, general requirements, operation requirements, storage and management requirements and environmental protection requirements for secondary cell disassembly of traction battery used in electric vehicle. This document is applicable to disassembly of the secondary Li-ion cell used in decommissioned vehicle. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2900.41 Electrotechnical terminology — Primary and secondary cells and batteries GB 8978 Integrated wastewater discharge standard GB/T 11651 Code of practice for selection of personal protective equipments GB 12348 Emission standard for industrial enterprises noise at boundary GB 16297 Comprehensive emission standard of air pollutants GB 18597 Standard for pollution control on hazardous waste storage GB 18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill GB/T 19596 Terminology of electric vehicles GB/T 26989 Automobile recovery—Terminology GB/T 33598 Recycling of traction battery used in electric vehicle—Dismantling specification GB/T 33598.2 Recycling of traction battery used in electric vehicle—Recycling—Part 2: Materials recycling requirements GB/T 45001 Occupational health and safety management systems—Requirements with guidance for use HJ 610 Technical guidelines for environmental impact assessment — Groundwater environment HJ 2025 Technical specifications for collection, storage, transportation of hazardous waste HG/T 5815 Technical specification for chemical discharge of waste batteries HG/T 5816 Technical specification for pyrolysis process of waste batteries recovery WB/T 1061 Management specification for waste secondary battery recycling YS/T 1174 Technical specification for crush and sorting waste battery 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 2900.41, GB/T 26989, GB/T 19596 and GB/T 33598 as well as the following apply. 3.1 secondary cell basic unit device that converts the chemical energy and electric energy mutually, generally including electrode, diaphragm, electrolyte, housing and terminal, and is also designed to be rechargeable [Source: GB/T 19596-2017, 3.3.2.1.1, modified] 3.2 secondary cell disassembly disassembly of the decommissioned traction secondary cell [Source: GB/T 33598-2017, 3.1, modified] 3.3 jelly roll internal components after removing shell and cover plate of the secondary cell, etc., mainly composed of positive and negative plates, diaphragms and electrolyte 3.4 powder of battery material powder composed of one or more valuable components such as lithium, nickel, cobalt, manganese, iron and graphite obtaining from the disassembly of secondary cell 3.5 separation rate of jelly roll percentage of the number of secondary cells with jelly roll completely separated in that of secondary cells put into the separation system 4 General requirements 4.1 General 4.1.1 The disassembly enterprise shall formulate disassembly operation procedures or operation instructions according to the disassembly information provided by automobile manufacturers. 4.1.2 Disassembly and separation operations shall not be carried out manually or in open air. 4.1.3 Information acquisition and traceability management shall be carried out for secondary cell (hereinafter referred to as "cell") before disassembly. 4.2 Site requirements 4.2.1 The disassembly site shall be a closed or semi-closed building, and be ventilated, dry and well lit. 4.2.2 The disassembly and storage sites shall be equipped with safety protection and environmental protection facilities, including but not limited to: a) firefighting facilities such as sandboxes, fire hydrants, carbon dioxide extinguishers, etc.; b) alarm facilities; c) emergency facilities; d) monitoring facilities; e) exhaust gas collection/processing facilities; f) waste liquid collection/processing facilities. 4.2.3 The ground of the disassembly and storage site shall be hardened and protected from seepage according to the requirements specified in HJ 610. 4.2.4 The general solid waste storage site and the hazardous waste storage site shall comply with the requirements of GB 18599 and GB 18597 respectively. 4.3 Equipment requirements 4.3.1 It shall be capable of cells cutting, separation, crushing and sorting. 4.3.2 It shall be able to process cells of different specifications and sizes. 4.3.3 The product separation and collection process shall be in closed form or equipped with negative pressure gas gathering device. 4.3.4 Cell positioning, voltage detection, automatic fixation, precise disassembly, product separation and collection, fault early warning, emergency stop of accidents, fire prevention and explosion prevention, etc. should be provided. 4.3.5 Open flame cutting processes such as oxyacetylene flame shall not be used to cut cells. 4.4 Personnel requirements 4.4.1 They shall wear and use protective equipment according to GB/T 11651, including but not limited to protective gloves, safety helmets, overalls, goggles, labor shoes. 4.4.2 They shall be familiar with and master the disassembly operation process, pass the professional training in standardized operation, safety and environmental protection and emergency processing, and take up the post after passing the examination.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 General requirements 5 Operation requirements 6 Storage and management requirements 7 Safety and environmental protection requirements
Referred in QC/T 1156-2021:
*GB/T 2900.41-2008 Electrotechnical terminology - Primary and secondary cells and batteries
*GB 8978-1996 Integrated Wastewater Discharge Standard
*GB/T 11651-2008 Code of practice for selection of personal protective equipments
*GB 12348-2008 Emission Standard for Industrial Enterprises Noise at Boundary
*GB 16297-1996 Comprehensive emission standard of air pollutants
*GB 18597-2001/XG1-2013 Standard for pollution control on hazardous waste storage (including Amendment 1)
*GB 18599-2020 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
*GB/T 19596-2017 Terminology of electric vehicles
*GB/T 26989-2011 Automobile recovery - Terminology
*GB/T 33598-2017 Recycling of traction battery used in electric vehicle -- Dismantling specification
*GB/T 33598.2-2020 Recycling of traction battery used in electric vehicle—Recycling—Part 2:Materials recycling requirements
*GB/T 45001-2020 Occupational health and safety management systems—Requirements with guidance for use
*HJ 610-2016 Technical guidelines for environmental impact assessment�groundwater environment
*HJ 2025-2012 Technical specifications for collection, storage, transportation of hazardous waste
*HG/T 5815-2020 Technical specification for chemical discharge of waste batteries
*HG/T 5816-2020 Technical specification for pyrolysis process of waste batteries recovery
*WB/T 1061-2016 Management specification for waste secondary battery recycling
*YS/T 1174-2017 Technical specification for crush and sorting waste battery
QC/T 1156-2021 is referred in:
*YY 0285.1-1999 Sterile,single-use intravascular catheters-Part 1:General requirements
*YY 0285.1-2004 Sterile, single-use intravascular catheters - Part 1: General requirements
*FZ/T 50010.5-1998 Pulp board for viscose fiber - Determination of ash content
*FZ/T 50010.5-2023 Pulpboard for regenerated cellulose fiber-Determination of ash content
*GB/T 5009.152-2003 Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for foods pack
*GB 17762-1999 Safe and hygienic requirements of thermotolerant glass ware
*NB/T 33003-2010 Communication protocols between off-board charger monitoring unit and battery management system for electric vehicle
*YY/T 0586-2005 Medical polymer products - Test methods of radiopacity
*YY/T 0586-2016 Medical polymer products - X-ray permeability test method
Code of China
Standard
QC/T 1156-2021  Recycling of traction battery used in electric vehicle - Specification for secondary cell disassembly (Draft for approval) (English Version)
Standard No.QC/T 1156-2021
Statusvalid
LanguageEnglish
File FormatPDF
Word Count5500 words
Price(USD)180.0
Implemented on2022-2-1
Deliveryvia email in 1 business day
Detail of QC/T 1156-2021
Standard No.
QC/T 1156-2021
English Name
Recycling of traction battery used in electric vehicle - Specification for secondary cell disassembly (Draft for approval)
Chinese Name
车用动力电池回收利用 单体拆解技术规范 (报批稿)
Chinese Classification
Professional Classification
QC
ICS Classification
Issued by
Issued on
2021-08-21
Implemented on
2022-2-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
5500 words
Price(USD)
180.0
Keywords
QC/T 1156-2021, QC 1156-2021, QCT 1156-2021, QC/T1156-2021, QC/T 1156, QC/T1156, QC1156-2021, QC 1156, QC1156, QCT1156-2021, QCT 1156, QCT1156
Introduction of QC/T 1156-2021
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This document is developed in accordance with the rules given in GB/T 1.1-2020 Directives for standardization—Part 1: Rules for the structure and drafting of standardizing documents. This document was proposed and is under the jurisdiction of the National Technical Committee of Auto Standardization (SAC/TC 114). This document is issued for the first time. Recycling of traction battery used in electric vehicle— Specifications for secondary cell disassembly 1 Scope This document specifies the terms and definitions, general requirements, operation requirements, storage and management requirements and environmental protection requirements for secondary cell disassembly of traction battery used in electric vehicle. This document is applicable to disassembly of the secondary Li-ion cell used in decommissioned vehicle. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 2900.41 Electrotechnical terminology — Primary and secondary cells and batteries GB 8978 Integrated wastewater discharge standard GB/T 11651 Code of practice for selection of personal protective equipments GB 12348 Emission standard for industrial enterprises noise at boundary GB 16297 Comprehensive emission standard of air pollutants GB 18597 Standard for pollution control on hazardous waste storage GB 18599 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill GB/T 19596 Terminology of electric vehicles GB/T 26989 Automobile recovery—Terminology GB/T 33598 Recycling of traction battery used in electric vehicle—Dismantling specification GB/T 33598.2 Recycling of traction battery used in electric vehicle—Recycling—Part 2: Materials recycling requirements GB/T 45001 Occupational health and safety management systems—Requirements with guidance for use HJ 610 Technical guidelines for environmental impact assessment — Groundwater environment HJ 2025 Technical specifications for collection, storage, transportation of hazardous waste HG/T 5815 Technical specification for chemical discharge of waste batteries HG/T 5816 Technical specification for pyrolysis process of waste batteries recovery WB/T 1061 Management specification for waste secondary battery recycling YS/T 1174 Technical specification for crush and sorting waste battery 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 2900.41, GB/T 26989, GB/T 19596 and GB/T 33598 as well as the following apply. 3.1 secondary cell basic unit device that converts the chemical energy and electric energy mutually, generally including electrode, diaphragm, electrolyte, housing and terminal, and is also designed to be rechargeable [Source: GB/T 19596-2017, 3.3.2.1.1, modified] 3.2 secondary cell disassembly disassembly of the decommissioned traction secondary cell [Source: GB/T 33598-2017, 3.1, modified] 3.3 jelly roll internal components after removing shell and cover plate of the secondary cell, etc., mainly composed of positive and negative plates, diaphragms and electrolyte 3.4 powder of battery material powder composed of one or more valuable components such as lithium, nickel, cobalt, manganese, iron and graphite obtaining from the disassembly of secondary cell 3.5 separation rate of jelly roll percentage of the number of secondary cells with jelly roll completely separated in that of secondary cells put into the separation system 4 General requirements 4.1 General 4.1.1 The disassembly enterprise shall formulate disassembly operation procedures or operation instructions according to the disassembly information provided by automobile manufacturers. 4.1.2 Disassembly and separation operations shall not be carried out manually or in open air. 4.1.3 Information acquisition and traceability management shall be carried out for secondary cell (hereinafter referred to as "cell") before disassembly. 4.2 Site requirements 4.2.1 The disassembly site shall be a closed or semi-closed building, and be ventilated, dry and well lit. 4.2.2 The disassembly and storage sites shall be equipped with safety protection and environmental protection facilities, including but not limited to: a) firefighting facilities such as sandboxes, fire hydrants, carbon dioxide extinguishers, etc.; b) alarm facilities; c) emergency facilities; d) monitoring facilities; e) exhaust gas collection/processing facilities; f) waste liquid collection/processing facilities. 4.2.3 The ground of the disassembly and storage site shall be hardened and protected from seepage according to the requirements specified in HJ 610. 4.2.4 The general solid waste storage site and the hazardous waste storage site shall comply with the requirements of GB 18599 and GB 18597 respectively. 4.3 Equipment requirements 4.3.1 It shall be capable of cells cutting, separation, crushing and sorting. 4.3.2 It shall be able to process cells of different specifications and sizes. 4.3.3 The product separation and collection process shall be in closed form or equipped with negative pressure gas gathering device. 4.3.4 Cell positioning, voltage detection, automatic fixation, precise disassembly, product separation and collection, fault early warning, emergency stop of accidents, fire prevention and explosion prevention, etc. should be provided. 4.3.5 Open flame cutting processes such as oxyacetylene flame shall not be used to cut cells. 4.4 Personnel requirements 4.4.1 They shall wear and use protective equipment according to GB/T 11651, including but not limited to protective gloves, safety helmets, overalls, goggles, labor shoes. 4.4.2 They shall be familiar with and master the disassembly operation process, pass the professional training in standardized operation, safety and environmental protection and emergency processing, and take up the post after passing the examination.
Contents of QC/T 1156-2021
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 General requirements 5 Operation requirements 6 Storage and management requirements 7 Safety and environmental protection requirements
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: TransForyou Co., Ltd. 2008-2040
 
 
Keywords:
QC/T 1156-2021, QC 1156-2021, QCT 1156-2021, QC/T1156-2021, QC/T 1156, QC/T1156, QC1156-2021, QC 1156, QC1156, QCT1156-2021, QCT 1156, QCT1156