Detail of GB/T 1234-2012

Introduction of GB/T 1234-2012

1 Scope This standard specifies the grade, order contents, dimensions, shapes, weights and permissible deviations, technical requirements, test methods, inspection rules, and packaging, marking and quality certificates of high resistance alloys for electrical heating. This standard is applicable to the alloy wires, plates and strips, bars and wire rods (hereinafter referred to as alloys) of drawn, rolled and forged Ni-Cr, Ni-Cr-Fe and Fe-Cr-Al high resistance alloys for electrical heating for manufacturing various electric heating elements and general resistance elements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 223.3 Methods forchemical analysis of iron, steel and alloy - The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method GB/T 223.8 Methods for chemical analysis of iron, steel and alloy - The sodium fluoride separation-EDTA titration method for the determination of aluminium content GB/T 223.9 Iron, steel and alloy - Determination of aluminium content - Chrom azurol S photometric method GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method GB/T 223.25 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime gravimetric method for the determination of nickel content GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method GB/T 223.28 Methods for chemical analysis of iron steel and alloy - The α-benzoinoxime gravimetric method for the determination of molybdenum content GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method GB/T 223.58 Methods for chemical analysis of iron, steel and alloy - The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content GB/T 223.59 Iron, steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The ammonium phosphomolybdate volumetric method for the determination of phosphorus content GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate extraction photometric method for the determination of phosphorus content GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium (potassium) periodate photometric method for the determination of manganese content GB/T 223.64 Iron, steel and alloy - Determination of manganese content - Flame atomic absorption spectrometric method GB/T 223.67 Iron, steel and alloy - Determination of sulfur content - Methylene blue spectrophotometric method GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content GB/T 223.69 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace GB/T 223.70 Iron, steel and alloy - Determination of iron contents - O-phenanthroline spectrophotometric method GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric method after combustion in the pipe furnace for the determination of carbon content GB/T 223.72 Iron, steel and alloy - Determination of sulfur content - Gravimetric method GB/T 223.73 Iron, steel and alloy - Determination of iron contents - Titanium trichloride-potassium dichromate titration method GB/T 223.79 Iron and Steel - Determination of multi-element contents - X-ray fluorescence spectrometry (routine method)

Contents of GB/T 1234-2012

Foreword I 1 Scope 2 Normative references 3 Order contents 4 Dimensions, shapes, weights and permissible deviations 5 Technical requirements 6 Test methods 7 Inspection rules 8 Packaging, marking and quality certificate Annex A (Informative) Resistance temperature factors (correction coefficients) of high resistance alloys for electrical heating Annex B (Informative) Main physical properties of alloys for electrical heating