1 Scope
This standard specifies the special safety requirements for M -hybrid electric vehicles (see definitions in GB/T 19596 for the hybrid electric vehicles).
This standard is applicable to the M-hybrid electric vehicles (as specified in GB 156-1993) of which the on-board circuit is less than 660V (AC) or 1000V (DC) in the maximum operating voltage. The hybrid electric vehicles of other types may refer to this standard.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrigendum) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions referred to apply.
GB 156-1993 "Standard Voltages" (neq IEC 38: 1993)
GB 4208 "Degrees of Protection Provided by Enclosure (IP Code)" (GB 4208-1993, eqv IEC 529: 1989)
GB 14023 "Vehicles，Motorboats and Spark-ignited Engine-driven Devices--Radio Disturbance Characteristics--Limits and Methods of Measurement" (GB 14023-2000, idt IEC/CISPRI 2: 1997)
GB 18655 "Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles" (GB 18655-2002, idt IEC/CISPR 25: 1995)
GB/T 17578 "Provisions of Strength for the Superstructure of Bus" (GB 17578-1998, eqv ECE R66)
GB/T 17619 "Limits and Methods of Testing for Immunity of Electrical/Electronic Sub-assemblies in Vehicles to Electromagnetic Radiation"
GB/T 18384.1 "Electric Vehicles -- Safety Specification -- Part 1: On-board Energy Storage"
GB/T 18384.3-2001 "Electric Vehicles -- Safety Specification -- Part 3: Protection of Persons against Electric Hazards"
GB/T 18387 "Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9kHz to 30MHz" (GB 18387-2001, idt SAE J551/5: 1995)
GB/T 19596 "Terminology of Electric Vehicles"
GB/T 4094.2-2005 "Electric Vehicles -- Symbols for Controls, Indicators and Tell-tales"
3 Terms and Definitions
For the purpose of this standard, the terms and definitions in GB/T 19596 and those below apply.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5. Operation Manual for the User
No. 1 Amendment of
GB/T 19751-2005 "Hybrid Electric Vehicles Safety Specification"
Letter on Approval of No. 1 Amendment of
GB/T 19751-2005 "Hybrid Electric Vehicles Safety Specification"
1 Scope
This standard specifies the special safety requirements for M -hybrid electric vehicles (see definitions in GB/T 19596 for the hybrid electric vehicles).
This standard is applicable to the M-hybrid electric vehicles (as specified in GB 156-1993) of which the on-board circuit is less than 660V (AC) or 1000V (DC) in the maximum operating voltage. The hybrid electric vehicles of other types may refer to this standard.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrigendum) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions referred to apply.
GB 156-1993 "Standard Voltages" (neq IEC 38: 1993)
GB 4208 "Degrees of Protection Provided by Enclosure (IP Code)" (GB 4208-1993, eqv IEC 529: 1989)
GB 14023 "Vehicles，Motorboats and Spark-ignited Engine-driven Devices--Radio Disturbance Characteristics--Limits and Methods of Measurement" (GB 14023-2000, idt IEC/CISPRI 2: 1997)
GB 18655 "Limits and Methods of Measurement of Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles" (GB 18655-2002, idt IEC/CISPR 25: 1995)
GB/T 17578 "Provisions of Strength for the Superstructure of Bus" (GB 17578-1998, eqv ECE R66)
GB/T 17619 "Limits and Methods of Testing for Immunity of Electrical/Electronic Sub-assemblies in Vehicles to Electromagnetic Radiation"
GB/T 18384.1 "Electric Vehicles -- Safety Specification -- Part 1: On-board Energy Storage"
GB/T 18384.3-2001 "Electric Vehicles -- Safety Specification -- Part 3: Protection of Persons against Electric Hazards"
GB/T 18387 "Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9kHz to 30MHz" (GB 18387-2001, idt SAE J551/5: 1995)
GB/T 19596 "Terminology of Electric Vehicles"
GB/T 4094.2-2005 "Electric Vehicles -- Symbols for Controls, Indicators and Tell-tales"
3 Terms and Definitions
For the purpose of this standard, the terms and definitions in GB/T 19596 and those below apply.
Contents of GB/T 19751-2005
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5. Operation Manual for the User
No. 1 Amendment of
GB/T 19751-2005 "Hybrid Electric Vehicles Safety Specification"
Letter on Approval of No. 1 Amendment of
GB/T 19751-2005 "Hybrid Electric Vehicles Safety Specification"
