Fire-resistant structural steel plate, sheet and strip
1 Scope
This document specifies the designation representation, order information, dimension, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of fire-resistant structural steel plates, sheets and strips.
This document is applicable to steel plates and sheets with a thickness of not greater than 150mm and steel strips and their sheared sheet with a thickness of not greater than 25.4mm (hereinafter referred to as "steel plates, sheets and strips"), which are mainly used to manufacture general structures and engineering structures with fire resistance.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.9 Iron, steel and alloy - Determination of aluminium content - Chrome azurol S photometric method
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy - The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.17 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.63 Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
GB/T 223.79 Iron and steel - Determination of multi-element contents - X-ray fluorescence spectrometry (Routine method)
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 228.2 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
GB/T 229 Metallic materials - Charpy pendulum impact test method
GB/T 232 Metallic materials - Bend test
GB/T 247 General rule of package, mark and certification for steel plates (sheets) and strips
GB/T 709 Dimension, shape, weight and tolerance for hot-rolled steel strip, plate and sheet
GB/T 2970 Method for ultrasonic testing of thicker steel plates
GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method)
GB/T 5313 Steel plates with through-thickness characteristics
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 14977 General requirement for surface condition of hot-rolled steel plates
GB/T 17505 Steel and steel products - General technical delivery requirements
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20125 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
fire-resistant structural steel
steel that contains a certain amount of alloy elements such as Mo and Cr to improve its fire resistance
4 Designation representation
4.1 The designation of fire-resistant structural steel is composed of four parts: "Q" (the Chinese phonetic alphabet representing the yield strength); the specified minimum upper yield strength; "FR" (the initials of "Fire Resistant"); quality grade symbol (B, C, D or E).
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Designation representation
Fire-resistant structural steel plate, sheet and strip
1 Scope
This document specifies the designation representation, order information, dimension, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of fire-resistant structural steel plates, sheets and strips.
This document is applicable to steel plates and sheets with a thickness of not greater than 150mm and steel strips and their sheared sheet with a thickness of not greater than 25.4mm (hereinafter referred to as "steel plates, sheets and strips"), which are mainly used to manufacture general structures and engineering structures with fire resistance.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.9 Iron, steel and alloy - Determination of aluminium content - Chrome azurol S photometric method
GB/T 223.11 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy - The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.17 Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.23 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method
GB/T 223.26 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method
GB/T 223.40 Iron, steel and alloy - Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.63 Iron, steel and alloy - Determination of manganese content - Sodium (potassium) periodate spectrophotometric method
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace
GB/T 223.79 Iron and steel - Determination of multi-element contents - X-ray fluorescence spectrometry (Routine method)
GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 228.2 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
GB/T 229 Metallic materials - Charpy pendulum impact test method
GB/T 232 Metallic materials - Bend test
GB/T 247 General rule of package, mark and certification for steel plates (sheets) and strips
GB/T 709 Dimension, shape, weight and tolerance for hot-rolled steel strip, plate and sheet
GB/T 2970 Method for ultrasonic testing of thicker steel plates
GB/T 2975 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
GB/T 4336 Carbon and low-alloy steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (routine method)
GB/T 5313 Steel plates with through-thickness characteristics
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 14977 General requirement for surface condition of hot-rolled steel plates
GB/T 17505 Steel and steel products - General technical delivery requirements
GB/T 20066 Steel and iron - Sampling and preparation of samples for the determination of chemical composition
GB/T 20123 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
GB/T 20125 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
fire-resistant structural steel
steel that contains a certain amount of alloy elements such as Mo and Cr to improve its fire resistance
4 Designation representation
4.1 The designation of fire-resistant structural steel is composed of four parts: "Q" (the Chinese phonetic alphabet representing the yield strength); the specified minimum upper yield strength; "FR" (the initials of "Fire Resistant"); quality grade symbol (B, C, D or E).
Contents of GB/T 28415-2023
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Designation representation
