1 Scope
This standard specifies the requirements for the bright steel such as the terms and definitions, classification code, dimension, shape, weight and permissible deviations, technical requirements, test methods, inspection rules, marking and quality certificate and packaging, transportation and storage.
This standard is applicable to the round flake, polish and buff steel with higher requirement for surface quality.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 2101 General Requirement of Acceptance, Packaging, Marking, and Certification for Section Steel
GB/T 2103 General Requirements for Acceptance, Packing, Marking and Quality Certification of Steel Wire
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Bright steel
The round steel with glossy surface without rolling defect and decarburized layer. It may be divided into flake steel, polish steel and buff steel.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification Code
5 Dimensions, Shapes, Weight and Permissible Deviations
6 Technical Requirements
7 Test Method
8 Inspection Rules
9 Marking and Quality Certificate
10 Packaging, Transportation and Storage
1 Scope
This standard specifies the requirements for the bright steel such as the terms and definitions, classification code, dimension, shape, weight and permissible deviations, technical requirements, test methods, inspection rules, marking and quality certificate and packaging, transportation and storage.
This standard is applicable to the round flake, polish and buff steel with higher requirement for surface quality.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 2101 General Requirement of Acceptance, Packaging, Marking, and Certification for Section Steel
GB/T 2103 General Requirements for Acceptance, Packing, Marking and Quality Certification of Steel Wire
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Bright steel
The round steel with glossy surface without rolling defect and decarburized layer. It may be divided into flake steel, polish steel and buff steel.
Contents of GB/T 3207-2008
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification Code
5 Dimensions, Shapes, Weight and Permissible Deviations
6 Technical Requirements
7 Test Method
8 Inspection Rules
9 Marking and Quality Certificate
10 Packaging, Transportation and Storage
