ICS 71.100.20
CCS G 86
National Standard of the People's Republic of China
GB/T 3863-2025
Replaces GB/T 3863-2008
Industrial oxygen
工业氧
Issue date: 2025-08-01 Implementation date: 2026-02-01
Issued by the State Administration for Market Regulation
the Standardization Administration of the People's Republic of China
(This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.)
Industrial Oxygen
1 Scope
This document specifies the technical requirements for industrial oxygen, as well as requirements for batch formation, sampling, test sampling, test methods, inspection rules, marking, labeling, accompanying documents, packaging, filling, transportation, and storage. It describes the relevant test methods and provides safety information for industrial oxygen.
This document applies to gaseous and liquid industrial oxygen produced by separation from air and by water electrolysis.
2 Normative references
The contents of the following documents constitute indispensable provisions of this document through normative reference in the text. For dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 150 (all parts) Pressure vessels
GB 190 Hazardous goods packaging marks
GB/T 191 Packaging—Pictorial marking for handling of goods
GB/T 5099 (all parts) Seamless steel gas cylinders
GB/T 7144 Color marking for gas cylinders
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8982 Oxygen for medical and aviation breathing use
GB/T 8984 Gas analysis—Determination of trace amounts of carbon monoxide, carbon dioxide and hydrocarbons in gases—Gas chromatographic method with flame ionization detector
GB/T 11640 Seamless aluminum alloy gas cylinders
GB/T 14194 Filling requirements for compressed gas cylinders
GB 15258 General rules for preparation of precautionary label for chemicals
GB/T 15382 General technical requirements for cylinder valves
GB/T 16483 Chemical safety data sheet—Content and order of sections
GB/T 24159 Welded insulated gas cylinders
GB/T 27550 Safety technical requirements for gas cylinder filling stations
GB/T 28051 Filling requirements for welded insulated gas cylinders
GB/T 28054 Bundles of seamless steel gas cylinders
GB/T 30685 Technical requirements for road transport of gas cylinders in upright position
GB/T 33145 Large seamless steel gas cylinders
GB/T 34525 Safety regulations for handling, loading, unloading, storage and use of gas cylinders
GB/T 43306 Gas analysis—Sampling guidelines
JT/T 617 (all parts) Regulations concerning the road transport of dangerous goods
NB/T 10354 Tube trailers
NB/T 10355 Tube container modules
TSG R0005 Safety Technical Supervision Regulation for Mobile Pressure Vessels
TSG 07 Licensing Rules for Manufacturers and Fillers of Special Equipment
TSG 23 Safety Technical Regulation for Gas Cylinders
3 Terms and definitions
No terms and definitions are stipulated in this document.
4 Technical requirements
4.1 The technical requirements for industrial oxygen shall comply with the provisions of Table 1.
4.2 Moisture content shall not be determined for liquid oxygen.
4.3 For industrial oxygen in storage tanks, the methane and acetylene content shall be inspected at least once per month. The methane content shall not be greater than 50×10⁻⁶ (mole fraction), and the acetylene content shall not be greater than 0.1×10⁻⁶ (mole fraction).
Table 1 Technical requirements
5 Batch formation, sampling and test sampling
5.1 Batch formation
Industrial oxygen products filled into cylinders from a single production line under stable and continuous operation constitute one batch. For industrial oxygen filled into cylinder bundles, low-temperature liquid tankers, tube trailers, tube container modules, large seamless steel gas cylinders, or welded insulated gas cylinders, each individual package constitutes one batch.
5.2 Sampling
Shall comply with the provisions of GB/T 43306.
5.3 Test sampling
5.3.1 For cylinder-filled industrial oxygen, samples shall be taken randomly for inspection according to the sampling quantities specified in Table 2.
Table 2 Sampling inspection table for cylinder-filled industrial oxygen
5.3.2 For industrial oxygen filled into cylinder bundles, low-temperature liquid tankers, tube trailers, tube container modules, large seamless steel gas cylinders, or welded insulated gas cylinders, each package shall be inspected individually.
5.3.3 For industrial oxygen delivered via pipeline, sampling and inspection shall be conducted once every 4 hours, or the sampling frequency shall be agreed upon between the supplier and the purchaser.
6 Test methods
6.1 Determination of oxygen content
Shall be determined according to the method specified in GB/T 8982.
6.2 Determination of methane and acetylene content in oxygen
ICS 71.100.20
CCS G 86
National Standard of the People's Republic of China
GB/T 3863-2025
Replaces GB/T 3863-2008
Industrial oxygen
工业氧
Issue date: 2025-08-01 Implementation date: 2026-02-01
Issued by the State Administration for Market Regulation
the Standardization Administration of the People's Republic of China
(This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.)
Industrial Oxygen
1 Scope
This document specifies the technical requirements for industrial oxygen, as well as requirements for batch formation, sampling, test sampling, test methods, inspection rules, marking, labeling, accompanying documents, packaging, filling, transportation, and storage. It describes the relevant test methods and provides safety information for industrial oxygen.
This document applies to gaseous and liquid industrial oxygen produced by separation from air and by water electrolysis.
2 Normative references
The contents of the following documents constitute indispensable provisions of this document through normative reference in the text. For dated references, only the edition corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 150 (all parts) Pressure vessels
GB 190 Hazardous goods packaging marks
GB/T 191 Packaging—Pictorial marking for handling of goods
GB/T 5099 (all parts) Seamless steel gas cylinders
GB/T 7144 Color marking for gas cylinders
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8982 Oxygen for medical and aviation breathing use
GB/T 8984 Gas analysis—Determination of trace amounts of carbon monoxide, carbon dioxide and hydrocarbons in gases—Gas chromatographic method with flame ionization detector
GB/T 11640 Seamless aluminum alloy gas cylinders
GB/T 14194 Filling requirements for compressed gas cylinders
GB 15258 General rules for preparation of precautionary label for chemicals
GB/T 15382 General technical requirements for cylinder valves
GB/T 16483 Chemical safety data sheet—Content and order of sections
GB/T 24159 Welded insulated gas cylinders
GB/T 27550 Safety technical requirements for gas cylinder filling stations
GB/T 28051 Filling requirements for welded insulated gas cylinders
GB/T 28054 Bundles of seamless steel gas cylinders
GB/T 30685 Technical requirements for road transport of gas cylinders in upright position
GB/T 33145 Large seamless steel gas cylinders
GB/T 34525 Safety regulations for handling, loading, unloading, storage and use of gas cylinders
GB/T 43306 Gas analysis—Sampling guidelines
JT/T 617 (all parts) Regulations concerning the road transport of dangerous goods
NB/T 10354 Tube trailers
NB/T 10355 Tube container modules
TSG R0005 Safety Technical Supervision Regulation for Mobile Pressure Vessels
TSG 07 Licensing Rules for Manufacturers and Fillers of Special Equipment
TSG 23 Safety Technical Regulation for Gas Cylinders
3 Terms and definitions
No terms and definitions are stipulated in this document.
4 Technical requirements
4.1 The technical requirements for industrial oxygen shall comply with the provisions of Table 1.
4.2 Moisture content shall not be determined for liquid oxygen.
4.3 For industrial oxygen in storage tanks, the methane and acetylene content shall be inspected at least once per month. The methane content shall not be greater than 50×10⁻⁶ (mole fraction), and the acetylene content shall not be greater than 0.1×10⁻⁶ (mole fraction).
Table 1 Technical requirements
5 Batch formation, sampling and test sampling
5.1 Batch formation
Industrial oxygen products filled into cylinders from a single production line under stable and continuous operation constitute one batch. For industrial oxygen filled into cylinder bundles, low-temperature liquid tankers, tube trailers, tube container modules, large seamless steel gas cylinders, or welded insulated gas cylinders, each individual package constitutes one batch.
5.2 Sampling
Shall comply with the provisions of GB/T 43306.
5.3 Test sampling
5.3.1 For cylinder-filled industrial oxygen, samples shall be taken randomly for inspection according to the sampling quantities specified in Table 2.
Table 2 Sampling inspection table for cylinder-filled industrial oxygen
5.3.2 For industrial oxygen filled into cylinder bundles, low-temperature liquid tankers, tube trailers, tube container modules, large seamless steel gas cylinders, or welded insulated gas cylinders, each package shall be inspected individually.
5.3.3 For industrial oxygen delivered via pipeline, sampling and inspection shall be conducted once every 4 hours, or the sampling frequency shall be agreed upon between the supplier and the purchaser.
6 Test methods
6.1 Determination of oxygen content
Shall be determined according to the method specified in GB/T 8982.
6.2 Determination of methane and acetylene content in oxygen
