This standard specifies the classification code, ordering information, dimension appearance and permissible variation, technical specifications, test methods and, test rules as well as package, marking and quality certificates etc of the hot-rolled quality carbon structural steel strips.
This standard is applicable to the hot-rolled quality carbon structural steel strips with width less than 600mm and thickness not greater than 12mm; the steel strip with width 600mm~750mm may refer to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Methods for Chemical Analysis of Iron, Steel and Alloy - the Reduced Molybdosilicate Spectrophotometric Method for the Determination of Acid-soluble Silicon Content
GB/T 223.10 Methods for Chemical Analysis of Iron, Steel and Alloy - the Chrome Azurol S Photometric Method for the Determination of Aluminium Content
GB/T 223.11 Methods for Chemical Analysis of Iron, Steel and Alloy - the Ammonium Persulfate Oxidation Volumetric Method for the Determination of Chromium Content
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - the Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Methods for Chemical Analysis of Iron, Steel and Alloy - the Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.24 Methods for Chemical Analysis of Iron, Steel and Alloy - the Extraction Separation - the Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
Foreword I 1 Scope 2 Normative References 3 Classification and Code 4 Ordering Information 5 Dimension, Appearance, Weight and Permissible Deviation 6 Technical Requirements 7 Test Methods 8 Inspection Rules 9 Package, Marking and Quality Certificates
1 Scope
This standard specifies the classification code, ordering information, dimension appearance and permissible variation, technical specifications, test methods and, test rules as well as package, marking and quality certificates etc of the hot-rolled quality carbon structural steel strips.
This standard is applicable to the hot-rolled quality carbon structural steel strips with width less than 600mm and thickness not greater than 12mm; the steel strip with width 600mm~750mm may refer to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Methods for Chemical Analysis of Iron, Steel and Alloy - the Reduced Molybdosilicate Spectrophotometric Method for the Determination of Acid-soluble Silicon Content
GB/T 223.10 Methods for Chemical Analysis of Iron, Steel and Alloy - the Chrome Azurol S Photometric Method for the Determination of Aluminium Content
GB/T 223.11 Methods for Chemical Analysis of Iron, Steel and Alloy - the Ammonium Persulfate Oxidation Volumetric Method for the Determination of Chromium Content
GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium Carbonate Separation - Diphenyl Carbazide Photometric Method for the Determination of Chromium Content
GB/T 223.18 Methods for Chemical Analysis of Iron, Steel and Alloy - the Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content
GB/T 223.19 Methods for Chemical Analysis of Iron, Steel and Alloy - the Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content
GB/T 223.23 Methods for Chemical Analysis of Iron, Steel and Alloy - the Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
GB/T 223.24 Methods for Chemical Analysis of Iron, Steel and Alloy - the Extraction Separation - the Dimethylglyoxime Spectrophotometric Method for the Determination of Nickel Content
Contents of GB/T 8749-2008
Foreword I
1 Scope
2 Normative References
3 Classification and Code
4 Ordering Information
5 Dimension, Appearance, Weight and Permissible Deviation
6 Technical Requirements
7 Test Methods
8 Inspection Rules
9 Package, Marking and Quality Certificates
