Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of QB/T 1584-2005 Leather glove.
In addition to a number of editorial changes, the following technical changes have been made with respect to QB/T 1584-2005:
——The “Scope” of the standard is expanded;
——Standards referred are added in the “Normative references”;
——Requirements for “Size” are added;
——Requirements for “Specification” are adjusted, with relevant clauses in the former standard adjusted as Annex A (normative);
——Requirements for “Limits of harmful substances” are added;
——Requirements for "leather thickness" are deleted;
——Requirements for “suede leather” are added in “leather surface”;
——Requirements of "special style" are added in "Overall appearance";
——Requirements for “Delivery inspection” are simplified;
——"Judgment rules for single pair” is adjusted;
——Requirements for “Marking” and “Label” are adjusted;
——Annex A “Special type inspection” is adjusted as Annex B, with corresponding requirements added.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of National Technical Committee on Leather of Standardization Administration of China (SAC/TC 252).
This standard replaces the former professional standard QB/T 1584-2005 Leather glove, which is abolished from the implementation date hereof.
The previous editions of this standard are as follows:
——QB/T 1584-2005;
——QB/T 1584-1992.
Leather glove
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of leather glove.
This standard is applicable to leather glove (including mitt) made of natural leather.
This standard is also applicable to glove made of materials such as artificial leather and synthetic leather, as well as glove mainly made of natural leather, artificial leather and synthetic leather, and supplemented by textiles.
This standard is not applicable to glove for special purposes and requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (Water extraction method)
GB/T 17592 Textiles - Determination of the banned azo colorants
GB 18401-2010 National general safety technical code for textile products
GB/T 19941 Leather and fur - Chemical tests - Determination of formaldehyde content
GB/T 19942 Leather and fur - Chemical tests - Determination of banned azo colorants
GB 20400 Leather and fur - Limit of harmful matter
GB/T 23344 Textiles - Determination of 4-aminoazobenzene
QB/T 1583 Size designation of leather gloves
QB/T 2704 Glove leather
QB/T 2711 Leather - Physical and mechanical tests - Determination of tear load - Double edge tear
3 Classification
3.1 Classification by purpose and style:
——men’s;
——women’s.
3.2 Classification by processing method:
——machine sewing;
——hand sewing.
4 Requirements
4.1 Size
The size is selected according to the requirements of QB/T 1583 and its indication shall meet the requirements of QB/T 1583.
4.2 Specification
The specification is self-designed according to the relevant requirements of QB/T 1583, the common specifications and dimensions are shown in Annex A, and the permissible deviation of specification shall meet the requirements of Table 1.
Table 1 Permissible deviation of specification
In mm
Item Size
Length of middle finger Length from thumb root to forefinger root Width
Permissible deviation ±1.0 ±1.0 ±1.5
4.3 Limits of harmful substances
The limit of harmful substances in leather and textiles shall meet the requirements of Table 2.
Table 2 Limits of harmful substances in leather and textile materials
In mg/kg
Item Limit
Leather Textiles
Dissoluble harmful aromatic amine dyes ≤ 30 20
Free formaldehyde ≤ 75 75
4.4 Shell fabric
4.4.1 Leather
It is selected according to the requirements of QB/T 2704.
4.4.1.1 Leather surface
The glossy leather is smooth on surface, consistent in fineness and free from disfigurement, broken face, cracking and decoating; the suede leather has uniform fluff. Minor disfigurements, such as scattered small knots and small rough spots are permissible at unobvious places. The color is basically uniform and no decolonization occurs.
4.4.1.2 Leather body
The leather body is soft, full and elastic, with comfortable feel.
4.4.1.3 Leather lining
The leather lining is free from greasy sense; the inner incised wound, if any, shall not exceed half of the thickness and shall be glued.
4.4.1.4 Cut
The color of cut is basically the same as that of surface.
4.4.2 Artificial/Synthetic leather
It is selected according to the relevant standards, and shall free from obvious marks, unevenness and knots.
4.4.3 Textile material
It is selected according to the relevant standards, and shall free from reel-off and skipped yarn.
4.5 Accessory materials
4.5.1 Lining materials
The length, width and elasticity of lining materials are compatible with those of shell fabric. They are comfortable to wear and free from holes and tears. The five fingers of lining are sewn together with those of shell fabric, and the whole lining is free from wrinkles. The fur lining is soft and free from severe fur slipping, discoloration and peculiar smell; the seam is spliced flatly and smoothly.
4.5.2 Zipper
It is free from misalignment and teeth falling, and is smooth in zipping.
4.5.3 Buttons and other accessories
They are firmly fitted, flexible in use and free from burr and rust. The fitting position on the same pair of gloves is coordinated and consistent.
4.5.4 Identification
The appearance is clear and tidy, and the binding is flat, smooth and firm.
4.6 Sewing requirements
4.6.1 Sewing appearance
The stitch length is uniform and tidy, the bottom and upper threads are appropriate in tightness, and the back stitches are in the original pinhole without secondary stitches.
Foreword i
1 Scope
2 Normative references
3 Classification
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Normative) Common specifications, dimensions and measurements
Annex B (Normative) Special type inspection
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of QB/T 1584-2005 Leather glove.
In addition to a number of editorial changes, the following technical changes have been made with respect to QB/T 1584-2005:
——The “Scope” of the standard is expanded;
——Standards referred are added in the “Normative references”;
——Requirements for “Size” are added;
——Requirements for “Specification” are adjusted, with relevant clauses in the former standard adjusted as Annex A (normative);
——Requirements for “Limits of harmful substances” are added;
——Requirements for "leather thickness" are deleted;
——Requirements for “suede leather” are added in “leather surface”;
——Requirements of "special style" are added in "Overall appearance";
——Requirements for “Delivery inspection” are simplified;
——"Judgment rules for single pair” is adjusted;
——Requirements for “Marking” and “Label” are adjusted;
——Annex A “Special type inspection” is adjusted as Annex B, with corresponding requirements added.
This standard was proposed by China National Light Industry Council.
This standard is under the jurisdiction of National Technical Committee on Leather of Standardization Administration of China (SAC/TC 252).
This standard replaces the former professional standard QB/T 1584-2005 Leather glove, which is abolished from the implementation date hereof.
The previous editions of this standard are as follows:
——QB/T 1584-2005;
——QB/T 1584-1992.
Leather glove
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of leather glove.
This standard is applicable to leather glove (including mitt) made of natural leather.
This standard is also applicable to glove made of materials such as artificial leather and synthetic leather, as well as glove mainly made of natural leather, artificial leather and synthetic leather, and supplemented by textiles.
This standard is not applicable to glove for special purposes and requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2912.1 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (Water extraction method)
GB/T 17592 Textiles - Determination of the banned azo colorants
GB 18401-2010 National general safety technical code for textile products
GB/T 19941 Leather and fur - Chemical tests - Determination of formaldehyde content
GB/T 19942 Leather and fur - Chemical tests - Determination of banned azo colorants
GB 20400 Leather and fur - Limit of harmful matter
GB/T 23344 Textiles - Determination of 4-aminoazobenzene
QB/T 1583 Size designation of leather gloves
QB/T 2704 Glove leather
QB/T 2711 Leather - Physical and mechanical tests - Determination of tear load - Double edge tear
3 Classification
3.1 Classification by purpose and style:
——men’s;
——women’s.
3.2 Classification by processing method:
——machine sewing;
——hand sewing.
4 Requirements
4.1 Size
The size is selected according to the requirements of QB/T 1583 and its indication shall meet the requirements of QB/T 1583.
4.2 Specification
The specification is self-designed according to the relevant requirements of QB/T 1583, the common specifications and dimensions are shown in Annex A, and the permissible deviation of specification shall meet the requirements of Table 1.
Table 1 Permissible deviation of specification
In mm
Item Size
Length of middle finger Length from thumb root to forefinger root Width
Permissible deviation ±1.0 ±1.0 ±1.5
4.3 Limits of harmful substances
The limit of harmful substances in leather and textiles shall meet the requirements of Table 2.
Table 2 Limits of harmful substances in leather and textile materials
In mg/kg
Item Limit
Leather Textiles
Dissoluble harmful aromatic amine dyes ≤ 30 20
Free formaldehyde ≤ 75 75
4.4 Shell fabric
4.4.1 Leather
It is selected according to the requirements of QB/T 2704.
4.4.1.1 Leather surface
The glossy leather is smooth on surface, consistent in fineness and free from disfigurement, broken face, cracking and decoating; the suede leather has uniform fluff. Minor disfigurements, such as scattered small knots and small rough spots are permissible at unobvious places. The color is basically uniform and no decolonization occurs.
4.4.1.2 Leather body
The leather body is soft, full and elastic, with comfortable feel.
4.4.1.3 Leather lining
The leather lining is free from greasy sense; the inner incised wound, if any, shall not exceed half of the thickness and shall be glued.
4.4.1.4 Cut
The color of cut is basically the same as that of surface.
4.4.2 Artificial/Synthetic leather
It is selected according to the relevant standards, and shall free from obvious marks, unevenness and knots.
4.4.3 Textile material
It is selected according to the relevant standards, and shall free from reel-off and skipped yarn.
4.5 Accessory materials
4.5.1 Lining materials
The length, width and elasticity of lining materials are compatible with those of shell fabric. They are comfortable to wear and free from holes and tears. The five fingers of lining are sewn together with those of shell fabric, and the whole lining is free from wrinkles. The fur lining is soft and free from severe fur slipping, discoloration and peculiar smell; the seam is spliced flatly and smoothly.
4.5.2 Zipper
It is free from misalignment and teeth falling, and is smooth in zipping.
4.5.3 Buttons and other accessories
They are firmly fitted, flexible in use and free from burr and rust. The fitting position on the same pair of gloves is coordinated and consistent.
4.5.4 Identification
The appearance is clear and tidy, and the binding is flat, smooth and firm.
4.6 Sewing requirements
4.6.1 Sewing appearance
The stitch length is uniform and tidy, the bottom and upper threads are appropriate in tightness, and the back stitches are in the original pinhole without secondary stitches.
Contents of QB/T 1584-2018
Foreword i
1 Scope
2 Normative references
3 Classification
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Normative) Common specifications, dimensions and measurements
Annex B (Normative) Special type inspection
