This standard specifies the environment conditions, technical requirements, inspection methods, inspection rules, RAMS requirements, marking, packaging, transportation and storage of asynchronous traction motors for AC-driven locomotives.
This standard is applicable to asynchronous traction motors for AC-driven locomotives (hereinafter referred to as “motors”) powered by voltage source inverters.
2 Normative References
The following references are indispensable for the application of this standard. For dated reference, only the dated editions are applicable to this standard. For undated references, the latest edition (including any amendments) is applicable to this standard.
GB/T 191-2008 Packaging-Pictorial Marking for Handling of Goods (ISO 780: 1997, MOD)
GB/T 1032-2005 Test Procedure for Three-phase Induction Motors
GB 1971 Rotating Electrical Machines-Terminal Markings and Direction of Rotation (GB 1971-2006, IEC 60034-8: 2002, IDT)
GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (IEC 60034-5: 2000, IDT)
GB/T 5465.2-2008 Graphical Symbols for Use on Electrical Equipment - Part 2: Graphical Symbols
GB/T 9239.1-2006 Mechanical Vibration-Balance Quality Requirements for Rotors in a Constant (Rigid) State-Part 1: Specification and Verification of Balance Tolerances (ISO 1940-1: 2003, IDT)
GB/T 10068-2008 Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher-Measurement, Evaluation and Limits of Vibration (IEC 60034-14: 2007, IDT)
GB/T 10069.1-2006 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits-Part 1: Method for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines (ISO 1608: 1999, MOD)
GB/T 21413.1-2008 Railway Applications-Electric Equipment for Rolling Stock-Part 1: General Service Conditions and General Rules (IEC 60077-1: 1999, IDT)
GB/T 21562-2008 Railway Applications-Specification and Demonstration of Reliability, Availability Maintainability and Safety (RAMS) (IEC 62278: 2002, IDT)
GB/T 22715-2008 Impulse Voltage Withstand Levels of Form-wound Stator Coils for Rotating a.c. Machines (IEC 60034-15: 1995, IDT)
GB/T 25117.1-2010 Railway Applications-Rolling Stock-Combined Testing-Part 1: Combined Testing of Inverter-Fed Alternating Current Motors and Their Control System (IEC 61377-1: 2006, IDT)
GB/T 25117.3-2010 Railway Applications-Rolling Stock-Combined Testing-Part 3: Combined Testing of Alternating Current Motors Fed by an Indirect Converter and Their Control System (IEC 61377-3: 2002, MOD)
GB/T 25122.1-2010 Railway Applications-Power Convertors Installed on Board Rolling Stock-Part 1: Characteristics and Test Methods (IEC 61287-1: 2005, MOD)
GB/T 25123.2-2010 Electric Traction-Rotating Electrical Machines for Rail and Road Vehicles-Part 2: Electronic Convertor-Fed Alternating Current Motors (IEC 60349-2: 2002, MOD)
GB/T 25123.3-2011 Electric Traction-Rotating Electrical Machines for Rail and Road Vehicles-Part 3: Determination of the Total Losses of Convertor-Fed Alternating Current Motors by Summation of the Component Losses (IEC 60349-3: 1995, IDT)
TB/T 1704-2001 Test Methods for Locomotive Motor-DC Motor
TB/T 2368-2005 Motive Power Units-Bogies and Running Gear-Bogie Frame Structure Strength Tests
TB/T 3138-2006 Technical Specification of Flame Retardant Materials for Railway Locomotive and Vehicle
TB/T 3213-2009 General Technical Specification of Electric and Electronic Products-Used on Rolling Stock for Plateau
1 Scope
This standard specifies the environment conditions, technical requirements, inspection methods, inspection rules, RAMS requirements, marking, packaging, transportation and storage of asynchronous traction motors for AC-driven locomotives.
This standard is applicable to asynchronous traction motors for AC-driven locomotives (hereinafter referred to as “motors”) powered by voltage source inverters.
2 Normative References
The following references are indispensable for the application of this standard. For dated reference, only the dated editions are applicable to this standard. For undated references, the latest edition (including any amendments) is applicable to this standard.
GB/T 191-2008 Packaging-Pictorial Marking for Handling of Goods (ISO 780: 1997, MOD)
GB/T 1032-2005 Test Procedure for Three-phase Induction Motors
GB 1971 Rotating Electrical Machines-Terminal Markings and Direction of Rotation (GB 1971-2006, IEC 60034-8: 2002, IDT)
GB/T 2900.25 Electrotechnical Terminology - Rotating Electrical Machines (GB/T 2900.25-2008, IEC 60050-411: 1996, IDT)
GB/T 2900.36 Electrotechnical Terminology-Electric Traction [GB/T 2900.36-2003, IEC 60050 (811): 1991, MOD]
GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (IEC 60034-5: 2000, IDT)
GB/T 5465.2-2008 Graphical Symbols for Use on Electrical Equipment - Part 2: Graphical Symbols
GB/T 9239.1-2006 Mechanical Vibration-Balance Quality Requirements for Rotors in a Constant (Rigid) State-Part 1: Specification and Verification of Balance Tolerances (ISO 1940-1: 2003, IDT)
GB/T 10068-2008 Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher-Measurement, Evaluation and Limits of Vibration (IEC 60034-14: 2007, IDT)
GB/T 10069.1-2006 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits-Part 1: Method for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines (ISO 1608: 1999, MOD)
GB/T 21413.1-2008 Railway Applications-Electric Equipment for Rolling Stock-Part 1: General Service Conditions and General Rules (IEC 60077-1: 1999, IDT)
GB/T 21562-2008 Railway Applications-Specification and Demonstration of Reliability, Availability Maintainability and Safety (RAMS) (IEC 62278: 2002, IDT)
GB/T 21563-2008 Railway Applications-Rolling Stock Equipment-Shock and Vibration Tests (IEC 61373: 1999, IDT)
GB/T 22715-2008 Impulse Voltage Withstand Levels of Form-wound Stator Coils for Rotating a.c. Machines (IEC 60034-15: 1995, IDT)
GB/T 25117.1-2010 Railway Applications-Rolling Stock-Combined Testing-Part 1: Combined Testing of Inverter-Fed Alternating Current Motors and Their Control System (IEC 61377-1: 2006, IDT)
GB/T 25117.3-2010 Railway Applications-Rolling Stock-Combined Testing-Part 3: Combined Testing of Alternating Current Motors Fed by an Indirect Converter and Their Control System (IEC 61377-3: 2002, MOD)
GB/T 25122.1-2010 Railway Applications-Power Convertors Installed on Board Rolling Stock-Part 1: Characteristics and Test Methods (IEC 61287-1: 2005, MOD)
GB/T 25123.2-2010 Electric Traction-Rotating Electrical Machines for Rail and Road Vehicles-Part 2: Electronic Convertor-Fed Alternating Current Motors (IEC 60349-2: 2002, MOD)
GB/T 25123.3-2011 Electric Traction-Rotating Electrical Machines for Rail and Road Vehicles-Part 3: Determination of the Total Losses of Convertor-Fed Alternating Current Motors by Summation of the Component Losses (IEC 60349-3: 1995, IDT)
TB/T 1704-2001 Test Methods for Locomotive Motor-DC Motor
TB/T 2368-2005 Motive Power Units-Bogies and Running Gear-Bogie Frame Structure Strength Tests
TB/T 3138-2006 Technical Specification of Flame Retardant Materials for Railway Locomotive and Vehicle
TB/T 3213-2009 General Technical Specification of Electric and Electronic Products-Used on Rolling Stock for Plateau
