QB/T 5003-2024 Electronic faucet
1 Scope
This document specifies the requirements for the appearance, processing and assembly, dimensions, limits for hazardous substances extraction, and service performance of electronic faucets (hereinafter referred to as "faucets"). It also describes the corresponding test methods, and stipulates the service conditions, materials and supporting devices, inspection rules, as well as marking, packaging, transportation and storage. Additionally, it provides a classification system to facilitate the formulation and application of technical specifications.
This document is applicable to the design, production, inspection, and sale of faucets installed at the end of cold and hot water supply pipelines within buildings.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4208 Degrees of protection provided by enclosure (IP code)
GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
GB 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements
GB 4706.11 Household and similar electrical appliances - Safety - Particular requirements for instantaneous water heaters
GB 4706.15 Household and similar electrical appliances - Safety - Particular requirements for appliances for skin or hair care
GB/T 5270 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
GB/T 5296.2 Instructions for use of products of consumer interest - Part 2: Household and similar electrical appliances
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1: Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 2: Taper internal and external threads
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9286 Paints and varnishes - Cross-cut test
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 14536.1 Automatic electrical controls - Part 1: General requirements
GB/T 14536.9 Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves, including mechanical requirements
GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase)
GB/T 23447 Sanitary ware - Shower for bathing
GB/T 23448 Sanitary ware - Flexible hose
GB 25501 Minimum allowable values of water efficiency and water efficiency grades for faucets
GB/T 26572 Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 33733 Terminology and classification for the kitchen and sanitary ware fittings
GB/T 36464.2 Information technology - Intelligent speech interaction system - Part 2: Intelligent home appliances
JC/T 932 Drainage fittings for sanitary wares
QB/T 1334 General technical specifications for faucets
QB/T 2806 Thermostatic faucets
QB/T 5524 Cartridges for faucet
QB/T 5525 Limits and test methods for hazardous substances extraction in kitchen and sanitary hardware products
SJ/T 11364 Labeling requirements for restricted use of hazardous substances in electrical and electronic products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 33733 and the following apply.
3.1
electronic faucet
faucet powered by one or more sources such as external power supply, battery, and hydroelectric power generation, capable of achieving one or more functions such as non-contact control, touch-sensitive control, speech control, remote control via an application program/application software (APP), and temperature display
Contents
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Service conditions
6 Materials and supporting devices
7 Requirements
8 Test methods
9 Inspection rules
10 Marking, packaging, transportation and storage
Annex A (Normative) Life test A for touch-sensitive switches
Annex B (Normative) Life test B for touch-sensitive switches
Annex C (Normative) Water hammer resistance
QB/T 5003-2024 Electronic faucet
1 Scope
This document specifies the requirements for the appearance, processing and assembly, dimensions, limits for hazardous substances extraction, and service performance of electronic faucets (hereinafter referred to as "faucets"). It also describes the corresponding test methods, and stipulates the service conditions, materials and supporting devices, inspection rules, as well as marking, packaging, transportation and storage. Additionally, it provides a classification system to facilitate the formulation and application of technical specifications.
This document is applicable to the design, production, inspection, and sale of faucets installed at the end of cold and hot water supply pipelines within buildings.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 4208 Degrees of protection provided by enclosure (IP code)
GB 4343.1 Electromagnetic compatibility requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
GB 4706.1 Household and similar electrical appliances - Safety - Part 1: General requirements
GB 4706.11 Household and similar electrical appliances - Safety - Particular requirements for instantaneous water heaters
GB 4706.15 Household and similar electrical appliances - Safety - Particular requirements for appliances for skin or hair care
GB/T 5270 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion
GB/T 5296.2 Instructions for use of products of consumer interest - Part 2: Household and similar electrical appliances
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1: Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 2: Taper internal and external threads
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9286 Paints and varnishes - Cross-cut test
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 14536.1 Automatic electrical controls - Part 1: General requirements
GB/T 14536.9 Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves, including mechanical requirements
GB 17625.1 Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions (equipment input current ≤16A per phase)
GB/T 23447 Sanitary ware - Shower for bathing
GB/T 23448 Sanitary ware - Flexible hose
GB 25501 Minimum allowable values of water efficiency and water efficiency grades for faucets
GB/T 26572 Requirements of concentration limits for certain restricted substances in electrical and electronic products
GB/T 33733 Terminology and classification for the kitchen and sanitary ware fittings
GB/T 36464.2 Information technology - Intelligent speech interaction system - Part 2: Intelligent home appliances
JC/T 932 Drainage fittings for sanitary wares
QB/T 1334 General technical specifications for faucets
QB/T 2806 Thermostatic faucets
QB/T 5524 Cartridges for faucet
QB/T 5525 Limits and test methods for hazardous substances extraction in kitchen and sanitary hardware products
SJ/T 11364 Labeling requirements for restricted use of hazardous substances in electrical and electronic products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 33733 and the following apply.
3.1
electronic faucet
faucet powered by one or more sources such as external power supply, battery, and hydroelectric power generation, capable of achieving one or more functions such as non-contact control, touch-sensitive control, speech control, remote control via an application program/application software (APP), and temperature display
Contents of QB/T 5003-2024
Contents
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Service conditions
6 Materials and supporting devices
7 Requirements
8 Test methods
9 Inspection rules
10 Marking, packaging, transportation and storage
Annex A (Normative) Life test A for touch-sensitive switches
Annex B (Normative) Life test B for touch-sensitive switches
Annex C (Normative) Water hammer resistance
